AeroCool HEXFORMBKV2 Micro ATX PC Case Instruction Manual

1. Pwodwi souview

The AeroCool HEXFORMBKV2 is a high-performance Micro ATX PC case designed for optimal ventilation and a modern aesthetic. It features a tempered glass side panel to showcase your internal components and a stylish front panel that highlights the included FRGB fans. This mini-tower case supports efficient air and liquid cooling solutions.

Karakteristik kle:

• High-Performance Mini-Tower: Front panel designed for effective cooling, showcasing three fixed RGB fans.
• Expansive Cooling Support: Includes 3 FRGB fans (2 front, 1 rear) and supports liquid cooling at the front and rear.
• Micro ATX Compatibility: Supports Micro-ATX and Mini-ITX motherboards, CPU coolers up to 159 mm, and high-performance graphics cards up to 296 mm (without front radiator).
• Multimedia Access: Top panel features 1x USB 3.0 port, 2x USB 2.0 ports, microphone and HD audio jacks, and Reset/Power buttons.

2. Espesifikasyon

3. Gid Enstalasyon

Follow these steps to properly install your components into the AeroCool HEXFORMBKV2 PC case.

3.1 Debake

1. Retire bwat òdinatè a nan anbalaj li avèk prekosyon.
2. Remove any protective films or internal packaging materials.
3. Mete bwat la sou yon sifas ki plat e ki estab.

3.2 Enstalasyon mèr

1. Retire panèl bò an vè apeze a lè w devise vis maren yo.
2. Enstale pwoteksyon E/S la (si li pa deja enstale sou kat manman w lan) nan ouvèti dèyè bwat la.
3. Align your Micro ATX or Mini-ITX motherboard with the standoffs inside the case.
4. Secure the motherboard using the provided screws.

3.3 Enstalasyon ekipman pou pouvwa a

1. Locate the power supply mounting area at the bottom rear of the case.
2. Slide your power supply unit (PSU) into the designated bay.
3. Fikse PSU a ak vis nan dèyè bwat la.

3.4 Enstalasyon Disk Depo

1. Identify the 3.5-inch drive bays within the case.
2. Mount your hard drives or SSDs into the appropriate bays and secure them with screws.

3.5 Expansion Card (GPU) Installation

1. Retire kouvèti fant ekspansyon ki nesesè yo nan dèyè bwat la.
2. Insert your graphics card or other expansion cards into the PCIe slots on your motherboard.
3. Ensure the card is seated correctly and secure it with a screw. Note the maximum GPU length of 296 mm (without front radiator).

3.6 Sistèm refwadisman

The case comes with three pre-installed 120mm FRGB fans (two at the front, one at the rear). Additional fans or liquid cooling radiators can be installed as needed. Ensure proper airflow direction for optimal cooling.

3.7 Jesyon kab

Sèvi ak ouvèti pou kab yo ak pwen mare ki dèyè plato kat manman an pou òganize kab yo. Sa amelyore sikilasyon lè a ak estetik li.

4. Operasyon Enstriksyon

4.1 Limen/Etenyen

• To power on your PC, press the Pouvwa bouton ki sitiye sou panèl anwo a.
• To power off, either shut down through your operating system or press and hold the Pouvwa bouton pou kèk segond.

4.2 Front Panel I/O Ports

The top panel provides convenient access to various ports:

• Pò USB 3.0 (x1): Pou transfè done gwo vitès.
• Pò USB 2.0 (x2): Pou konekte periferik yo.
• Mikwofòn Jack: Pou opinyon odyo.
• HD Audio Jack: For audio output (headphones/speakers).
• Bouton Reyajiste: To restart the system. Note: This button may also cycle through FRGB lighting effects if connected to a compatible controller.

4.3 FRGB Fan Control

The pre-installed FRGB fans offer fixed RGB lighting. If your motherboard supports RGB control, you may be able to synchronize or change lighting effects via motherboard software. Otherwise, the Reset button might cycle through pre-set effects if wired accordingly.

5. Antretyen

Antretyen regilye ede asire pèfòmans optimal ak lonjevite konpozan PC ou yo.

5.1 Netwayaj Filtè Pousyè

• The HEXFORMBKV2 features a mesh front panel and a top panel with a magnetic dust filter.
• Periodically remove and clean these filters to prevent dust buildup, which can hinder airflow and cooling efficiency.
• Use compressed air or a soft brush to remove dust.

5.2 Netwayaj jeneral

• Siye deyò bwat la ak yon twal mou, damp twal. Evite pwodui netwayaj abrazif.
• For the tempered glass panel, use a glass cleaner and a microfiber cloth to prevent scratches.

NAN. Depanaj

If you encounter issues with your PC case, consider the following common troubleshooting steps:

• Pa gen pouvwa: Ensure all power cables (PSU to wall, PSU to motherboard, PSU to components) are securely connected. Check the power switch on the PSU.
• Vantilatè yo pa vire/RGB pa fonksyone: Verify that the fan power cables and RGB cables are correctly connected to the motherboard or a fan/RGB controller. Consult your motherboard manual for proper header connections.
• Surchof: Ensure all fans are spinning correctly and are oriented to provide adequate airflow (intake/exhaust). Clean dust filters regularly. Check CPU cooler and GPU temperatures using monitoring software.
• Front Panel Ports Not Working: Check that the front panel I/O cables (USB, Audio, Power/Reset) are correctly connected to the corresponding headers on your motherboard.

For more complex issues, consult the manuals for your individual PC components (motherboard, GPU, PSU) or seek professional assistance.

7. Garanti ak sipò

7.1 Enfòmasyon sou Garanti

The AeroCool HEXFORMBKV2 PC case comes with a 2-ane garanti for parts. Please retain your proof of purchase for warranty claims.

7.2 Sipò teknik

For technical assistance, product inquiries, or warranty claims, please visit the official AeroCool website or contact their customer support. You can typically find contact information on the manufacturer's websit oswa nan anbalaj pwodwi a.

• AeroCool Official Websit: www.aerocool.io
• Imèl Sipò pou Kliyan: support@aerocool.io (Egzample, please verify on official websit)