Pipishell PIXSF2
Manyèl Enstriksyon pou Montaj Miray Televizyon Pipishell Full Motion
Model: PIXSF2
Entwodiksyon
This manual provides detailed instructions for the installation, operation, and maintenance of your Pipishell Full Motion TV Wall Mount. Please read this manual thoroughly before installation to ensure safe and correct usage. Keep this manual for future reference.
Image: The Pipishell Full Motion TV Wall Mount, showcasing bra atikile li yo ak plak VESA a.
Enfòmasyon sou Sekirite
Improper installation or use of this product can result in serious injury or damage. Please adhere to the following safety guidelines:
- Asire w ke sifas montaj la ka sipòte pwa konbine montaj la ak televizyon an san danje.
- Do not mount on drywall alone. This mount requires installation into a single wood stud, concrete wall, or block wall.
- Use all provided hardware and do not substitute parts.
- Si ou pa sèten sou nenpòt pati nan pwosesis enstalasyon an, konsilte yon pwofesyonèl ki kalifye.
- Kenbe timoun ak bèt kay lwen pandan enstalasyon an.
Image: Illustration showing compatible wall types: concrete wall, single wood stud, and block wall. A warning indicates not to mount on drywall alone.
Kontni pake
Verify that all components are present and undamaged before beginning installation. If any parts are missing or defective, contact Pipishell customer support.
| Eleman | Kantite |
|---|---|
| Asanble Plak Miray la | 1 |
| Sipò televizyon | 1 |
| Materyèl pou monte (vis, lank, rondelle) | Asòti |
| Manyèl Enstriksyon | 1 |
Enstalasyon & Enstalasyon
Follow these steps carefully for a secure installation:
- Verifye konpatibilite: Before starting, ensure your TV's VESA pattern (Max: 100x100mm, Min: 75x75mm) and weight (Max: 33 lbs) are compatible with this mount.
- Jwenn pozisyon montaj la: Choose a suitable location on a single wood stud, concrete, or block wall. Use a stud finder to accurately locate the center of the wood stud if applicable.
- Plak miray pou monte: Secure the wall plate to the chosen wall type using the appropriate anchor bolts and hardware. Ensure it is level and firmly attached.
- Mete sipò televizyon an: Fasten the TV bracket to the back of your television using the provided screws that match your TV's VESA pattern.
- Hang Display: Carefully lift the television with the attached bracket and hook it onto the wall plate assembly. Ensure it is securely seated.
Image: Diagram illustrating VESA mounting patterns (100x100mm, 75x75mm) and maximum load capacity of 33 lbs for TV sizes 13-26 inches.
Image: Visual guide showing three steps: 1) Mount Wall Plate, 2) Attach TV Bracket, 3) Hang Display.
Enstriksyon Operasyon
Your Pipishell Full Motion TV Wall Mount offers versatile adjustments for optimal viewing:
- Swivel: The mount allows for a swivel range of up to ±90° (depending on TV size and wall distance) to adjust the horizontal viewang ang.
- Enklinezon: Adjust the vertical tilt from -15° to +5° to reduce glare and find the perfect viewang ang.
- Ekstansyon ak Retrè: Extend the TV up to 10.6 inches from the wall for flexible positioning or retract it to a mere 2.9 inches for a low-profile gade.
- Wotasyon: The VESA plate can rotate 360° allowing for landscape or portrait orientation of your display.
Image: A TV mounted on the wall, illustrating the swivel motion of ±90° and the extension/retraction range of 2.9 to 10.6 inches, along with tilt angles of -15° to +5°.
Image: A diagram showing the TV mount's full motion flexibility, including 360° rotation of the VESA plate.
Antretyen
To ensure the longevity and proper function of your TV wall mount:
- Tcheke tout vis ak koneksyon yo regilyèman pou asire yo rete sere epi byen fèm.
- Netwaye montaj la avèk yon twal mou epi sèk. Evite pwodui netwayaj abrazif oswa solvan.
- Do not hang anything from the mount other than the intended television.
Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Mòn nan santi l enstab apre enstalasyon an. | Loose mounting screws or incorrect wall anchors. | Re-check all wall plate screws and ensure they are tightened into a solid stud or appropriate anchors. Refer to installation steps. |
| Difficulty adjusting swivel/tilt. | Joints may be too tight or need lubrication. | Apply a small amount of silicone-based lubricant to the moving joints. Do not over-tighten joint bolts. |
| Televizyon an pa nivo. | Wall plate installed unevenly. | Adjust the leveling screws on the VESA plate if available, or re-install the wall plate ensuring it is perfectly level. |
Espesifikasyon
- Modèl: PIXSF2
- Mak: Pipishell
- Materyèl: Alloy Steel
- Koulè: Nwa
- Gwosè televizyon konpatib: 13-26 pous
- Kapasite maksimòm chaj: 33 liv (15 kg)
- VESA konpatibilite: 75x75mm, 100x100mm
- Kalite mouvman: Swivel, Rotate, Tilt, Full Motion, Articulating
- Ang Panche: -15° pou +5°
- Angle pivotante: ±90° (max, depends on TV size)
- Ekstansyon soti nan mi: 2.9 pous (retire) pou rive 10.6 pous (lonje)
- Dimansyon pwodwi: 38.98 x 12.6 x 5.12 pous (mont sèlman)
- Pwa atik: 1.39 liv
Garanti ak sipò
Pipishell products are designed for durability and performance. For specific warranty details, please refer to the warranty card included with your product or visit the official Pipishell websit.
For technical support, installation assistance, or any questions regarding your product, please contact Pipishell customer service:
- Imèl: support@pipishell.com
- Websit: www.pipishell.com
You can also find additional resources and FAQs on our websit.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.