Entwodiksyon
This manual provides essential information for the safe operation, assembly, maintenance, and troubleshooting of your Razor Power Core E90 Electric Scooter. Please read this manual thoroughly before initial use and retain it for future reference.

Figi 1: Devan view of the Razor Power Core E90 Electric Scooter.
Gid Sekirite
Operating an electric scooter can be hazardous. To ensure your safety and the safety of others, always follow these guidelines:
- Always wear a helmet and appropriate safety gear, including elbow and knee pads.
- Pa depase limit pwa maksimòm lan 120 liv (54 kg).
- Recommended for riders aged 8 ane ak plis.
- Ride only in safe, open areas away from traffic.
- Avoid riding on uneven surfaces, loose debris, or wet conditions.
- Maintain a safe distance from other riders and pedestrians.
- Familyarize w ak lwa ak règleman lokal yo konsènan itilizasyon scooter elektrik.
- Always use the hand-operated front brake to slow down or stop.

Figure 2: Rider demonstrating safe operation of the electric scooter.
Setup and Initial Charge
Debalaj ak Asanble
Your Razor Power Core E90 Electric Scooter comes largely pre-assembled. Carefully remove all contents from the box. Ensure all packaging materials are removed before proceeding.
Ajisteman gidon
The handlebar height can be adjusted for rider comfort. Loosen the quick-release clamp on the steering column, adjust the handlebar to the desired height, and securely tighten the clamp. Ensure the handlebar is aligned with the front wheel.
Premye chaj batri
Before first use, fully charge the scooter's 12V sealed lead-acid battery pou pi piti 12 èdtan, even if the indicator light turns green. This initial charge is crucial for battery longevity.
- Jwenn pò a chaje sou scooter la.
- Plug the charger into a standard wall outlet (100-240V AC).
- Connect the charger to the scooter's charging port. The charger light will indicate charging status (typically red for charging, green for fully charged).
- Dekonekte plato a yon fwa chaje fini.
Note: Do not overcharge the battery after the initial charge. Subsequent charges should be jiska 8 èdtan.
Enstriksyon Operasyon
Kòmanse Scooter la
- Ensure the scooter is on a flat, clear surface.
- Mete yon pye byen fèm sou platfòm nan.
- Use your other foot to kick-start the scooter forward.
- Once moving, gently engage the gaz located on the handlebar to activate the 90-watt hub motor.
The scooter can reach speeds of up to 10 mph (16 km / h) epi li bay jiska 60 minit of continuous ride time on a full charge.

Figure 3: Illustration of the innovative Power Core hub motor technology.
Frenaj
To slow down or stop, gently squeeze the hand-operated front brake lever on the handlebar. Apply pressure gradually to avoid sudden stops.
Karakteristik ekleraj
The Power Core E90 Glow features an electroluminescent wire that lights up the top of the deck and 6 dirije that glow below the deck, enhancing visibility and style. These lights activate automatically when the scooter is in operation.
Antretyen
Swen batri
- Rechaje batri a apre chak itilizasyon.
- If the scooter is not used for extended periods, charge the battery at least once a month to maintain its life.
- Do not store the scooter in extreme temperatures.
Netwayaj
Siye scooter a pwòp ak piblisiteamp cloth. Do not use harsh chemicals or solvents. Avoid spraying water directly onto electrical components.
Ajisteman fren
Periodically check the front brake for proper function. If the brake feels loose or too tight, adjust the cable tension at the brake lever or caliper. Consult a qualified technician if you are unsure.
Enspeksyon Jeneral
Regularly inspect the scooter for loose fasteners, damaged parts, or unusual wear. The scooter features an all-steel frame and fork for durability and a flat-free, airless rear tire, reducing maintenance needs for the rear wheel.

Figi 4: View of the durable all-steel frame construction.
Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Scooter does not start or move. | Battery is not charged; Power switch is off; Throttle not engaged correctly; Loose connection. | Charge the battery; Ensure power switch is ON; Kick-start the scooter before engaging throttle; Check all visible connections. |
| Reduced speed or ride time. | Low battery charge; Battery aging; Overweight rider; Riding uphill or on rough terrain. | Fully charge the battery; Consider battery replacement if old; Ensure rider is within weight limit; Ride on flat, smooth surfaces. |
| Brake not working effectively. | Brake cable too loose; Worn brake pads. | Adjust brake cable tension; Inspect and replace brake pads if necessary. |
| Limyè pa travay. | Loose connection; Electrical fault. | Check connections to the electroluminescent wire and LEDs; Contact customer support if issue persists. |
Espesifikasyon
| Non modèl | Razor Power Core E90 Scooter elektrik |
| Nimewo Modèl | 13112195 |
| Mak | razwa |
| Motè | 90-watt, high-torque, hub motor |
| Vitès maksimòm | Jiska 10 mph (16 km/h) |
| Tan monte | Jiska 60 minit nan itilizasyon kontinyèl |
| Batri | 12V sele plon-asid, rechargeable |
| Materyèl ankadreman | Alloy Steel |
| Materyèl wou | An poliyiretàn |
| Kawotchou dèyè | Flat-free, airless |
| Fren | Hand-operated, front brake |
| Limit Pwa | 120 liv (54 kg) |
| Laj Rekòmande | 8 ane ak plis |
| Dimansyon pwodwi (LxWxH) | 31.7" x 12.9" x 32.9" (80.5 santimèt x 32.8 santimèt x 83.6 santimèt) |
| Pwa atik | 9.82 kilogram (21.65 liv) |
| UPC | 845423021474 |
Garanti ak sipò
Manifakti garanti
This Razor Power Core E90 Electric Scooter is covered by a Garanti limite manifaktiTanpri gade kat garanti ki vini ak pwodwi ou a pou kondisyon espesifik yo.
International Disclaimer
This Razor product is produced for sale in the United States and Canada. Razor products produced for and sold in international channels are warrantied as applicable in such foreign countries. For details regarding Razor products that require service, were purchased in the United States or Canada, and are now outside the United States or Canada, consumers are responsible for all costs including shipping, resulting taxes, duties of replacement parts, and local power adapters at the owner’s expense.
Sipò pou Kliyan
For technical assistance, warranty claims, or to order replacement parts, please contact Razor Customer Support:
- Telefòn: +1 866 467 2967
- Visit the official Razor websit pou plis enfòmasyon ak resous sipò.