LEDONE Full Cut Off 60W LED Wall Pack Light

1. Entwodiksyon

This manual provides essential information for the safe installation, operation, and maintenance of your LEDONE Full Cut Off 60W LED Wall Pack Light. Please read these instructions thoroughly before installation and retain them for future reference. This fixture is designed for outdoor use in commercial and industrial settings, featuring a full cut-off design to minimize light pollution and a built-in photocell for dusk-to-dawn operation.

Imaj 1.1: Devan view of the LEDONE 60W Full Cut Off LED Wall Pack Light. This image displays the fixture's dark bronze housing and the array of LED lights behind a clear, tempered glass lens.

2. Enfòmasyon sou Sekirite

• AVÈTISMAN: Risk pou chòk elektrik. Dekonekte kouran an nan fizib la oswa disjonktè a anvan enstalasyon oswa antretyen.
• Enstalasyon an dwe fèt pa yon elektrisyen kalifye, dapre tout kòd elektrik nasyonal ak lokal yo.
• Asire rezèv la voltage is compatible with the fixture (120-277V AC).
• Do not handle live wires.
• Mete linèt sekirite ak gan pandan enstalasyon an.
• Asire w ke aparèy la byen monte pou anpeche l tonbe.
• Do not attempt to modify the fixture. Any modifications will void the warranty.

3. Pake kontni

Verifye ke tout konpozan yo prezan epi yo pa domaje anvan enstalasyon an.

• 1 x LEDONE Full Cut Off 60W LED Wall Pack Light Fixture
• Mounting Hardware (screws, anchors, gaskets)
• Manyèl Enstriksyon (dokiman sa a)

4. Espesifikasyon

Image 4.1: Dimensional drawing of the LEDONE 60W Wall Pack Light, showing measurements of 11.5 inches (293mm) in length, 10.8 inches (275mm) in width, and 3.9 inches (100mm) in height.

5. Enstalasyon ak Enstalasyon

Anvan ou kòmanse:

• Fèmen kouran nan disjoncteurs a oswa bwat fusible.
• Ensure the mounting surface is structurally sound and can support the fixture's weight.
• Have necessary tools ready: screwdriver, wire strippers, drill, sealant (if required for weatherproofing).

Enstriksyon pou monte:

1. Retire aparèy la nan anbalaj li avèk prekosyon.
2. Detach the mounting plate from the back of the fixture.
3. Position the mounting plate on the desired wall location. Mark the drilling points for the mounting screws.
4. Fè twou gid epi mete lank ki apwopriye yo si sa nesesè.
5. Secure the mounting plate to the wall using the provided screws. Ensure it is level and tight.

Imaj 5.1: Dèyè view of the LEDONE 60W Wall Pack Light, illustrating the integrated mounting bracket and conduit entry point for electrical wiring.

Enstriksyon fil elektrik:

6. Feed the electrical supply wires through the conduit entry point on the mounting plate.
7. Connect the fixture's wires to the supply wires using appropriate wire connectors:
   • Black wire (Fixture) to Live/Hot wire (Supply)
   • White wire (Fixture) to Neutral wire (Supply)
   • Green/Ground wire (Fixture) to Ground wire (Supply)
8. Asire w ke tout koneksyon an sekirite epi byen izole.
9. Carefully tuck all wires into the junction box or mounting plate cavity.
10. Attach the fixture body to the mounting plate, ensuring a tight seal to maintain IP65 rating. Secure with screws.
11. Apply silicone sealant around the edges of the fixture and conduit entry points if necessary to prevent water ingress.
12. Retabli pouvwa nan disjoncteurs a.

6. Operasyon Enstriksyon

This LED wall pack light is equipped with a built-in photocell for automatic dusk-to-dawn operation. No manual intervention is required after installation.

• Fonksyon soti nan solèy kouche rive nan solèy leve: The integrated photocell sensor detects ambient light levels. The fixture will automatically turn ON when natural light falls below a certain threshold (dusk) and turn OFF when sufficient natural light is detected (dawn).
• Rotatable Fixture: The fixture can be rotated by 15 degrees to adjust the light direction. This adjustment should be made during installation or maintenance when power is OFF. Loosen the appropriate screws, adjust the angle, and re-tighten securely.

Image 6.1: LEDONE 60W Wall Pack Lights installed on the exterior of a commercial building at night, demonstrating their effective illumination for large outdoor areas.

7. Antretyen

The LEDONE Wall Pack Light is designed for minimal maintenance. Regular inspection and cleaning will ensure optimal performance and longevity.

• Netwayaj: Periodically clean the exterior of the fixture, especially the lens and photocell, with a soft, damp cloth to remove dirt, dust, and debris. Ensure power is OFF before cleaning. Do not use abrasive cleaners or solvents.
• Enspeksyon: Enspekte aparèy la chak ane pou wè si li gen nenpòt siy domaj, fil elektrik ki lach, oswa korozyon. Asire w ke tout vis montaj yo byen sere.
• Fotoselil: Keep the photocell sensor clear of obstructions (e.g., leaves, dirt, paint) to ensure proper dusk-to-dawn operation.

NAN. Depanaj

9. Enfòmasyon sou Garanti

The LEDONE Full Cut Off 60W LED Wall Pack Light is covered by a Garanti limite. This product is designed for a long operational life of approximately 50,000 hours. For specific warranty terms and conditions, please refer to the warranty documentation provided at the time of purchase or contact LEDONE customer service.

10. Sipò

LEDONE is committed to providing quality lighting solutions and customer service. If you have any questions, require technical assistance, or need to report an issue with your product, please contact LEDONE customer support. Our team is based in California and ready to assist you.

For further assistance, please visit the official LEDONE websit la oubyen gade dokiman acha ou a pou jwenn enfòmasyon kontak.