Manyèl Enstriksyon Capteur Mouvman Mikwo Ond LEDONE

1. Pwodwi souview

The LEDONE Microwave Motion Sensor is designed for commercial lighting applications, offering advanced motion detection and 0-10V dimming capabilities. This sensor provides reliable performance across a wide range of environmental conditions, contributing to energy efficiency and automated lighting control.

Devan view of the LEDONE Microwave Motion Sensor, a white rectangular device with a small black sensor window and a white adjustment knob, with wires extending from one end.

Figi 1: Devan view of the LEDONE Microwave Motion Sensor.

Karakteristik kle:

0-10V reglabl: Compatible with most popular dimmers for commercial projects.
360° Wide Angle Detection: Detects movement up to 20 feet from any angle.
Ki estab e serye: Operates effectively in temperatures from -40°F to 158°F.
Ekonomize enèji: Automatic on/off functionality based on detected movement.

2. Enstalasyon ak Enstalasyon

Proper installation is crucial for optimal performance. This device is designed for wall mount installation and requires a corded electric connection. Consult a qualified electrician for wiring if you are unfamiliar with electrical installations.

Side view of the LEDONE Microwave Motion Sensor showing multiple colored wires (red, black, white, grey, purple) extending from one end, indicating electrical connections.

Figi 2: Side view of the sensor with wiring connections.

Etap enstalasyon:

Dekoneksyon pouvwa: Ensure power to the installation area is turned off at the circuit breaker before beginning any wiring.
Montaj: Securely mount the sensor to a wall using appropriate hardware. Ensure the sensor has an unobstructed view nan zòn deteksyon an.
Fil elektrik: Connect the sensor to the power supply and lighting fixture according to local electrical codes and the wiring diagram provided with the product packaging. The sensor supports 0-10V dimming; ensure proper connections for this functionality if desired.
Koneksyon pouvwa: Yon fwa tout koneksyon yo byen fèm, retabli kouran an nan sikwi a.
Tès Inisyal: Perform an initial test to ensure the sensor powers on and the connected lights respond.

Konfigirasyon:

The sensor can be configured using either DIP switches or a remote control (sold separately). Refer to the specific instructions included with your product for detailed settings related to detection sensitivity, hold time, and daylight harvesting.

3. Operasyon Enstriksyon

The LEDONE Microwave Motion Sensor operates by detecting movement within its 360-degree detection zone. Once configured, the sensor will automatically control connected lighting based on presence detection and ambient light levels (if daylight harvesting is enabled).

Operasyon otomatik:

When motion is detected, the sensor will activate the connected lighting.
If no motion is detected for a pre-set "hold time," the sensor will either dim the lights (if 0-10V dimming is configured) or turn them off completely.
The detection range is up to 20 feet, covering a wide area.

Ajisteman Anviwònman:

Settings such as sensitivity, hold time, and dimming levels can be adjusted via the DIP switches on the unit or through a compatible remote control. Consult the specific configuration guide for your model to understand each setting's function and how to adjust it.

4. Antretyen

The LEDONE Microwave Motion Sensor is designed for minimal maintenance. Regular checks can help ensure continued optimal performance.

Netwayaj: Periodically wipe the sensor's surface with a soft, dry cloth to remove dust or debris. Avoid using abrasive cleaners or solvents.
Enspeksyon: Annually inspect the wiring connections for any signs of wear or damage. Ensure the sensor is securely mounted.
Faktè anviwònman: Ensure the sensor is not obstructed by new installations or objects that could interfere with its detection field.

NAN. Depanaj

If you encounter issues with your LEDONE Microwave Motion Sensor, refer to the following common troubleshooting steps:

Pwoblèm	Kòz posib	Solisyon
Lights do not turn on with motion.	Pa gen kouran ki rive nan detèktè a. Kòrèk fil elektrik. Sensor sensitivity set too low. Obstruction in detection path.	Tcheke disjonktè a ak koneksyon kouran yo. Verifye fil elektrik yo avèk dyagram nan. Increase sensor sensitivity via DIP switch or remote. Retire nenpòt obstak.
Lights remain on or turn on without motion.	Sensor sensitivity set too high. Interference from external sources (e.g., HVAC, vibrations). Hold time set too long.	Decrease sensor sensitivity. Relocate sensor or identify source of interference. Adjust hold time setting.
Fonksyon gradyasyon an pa mache.	Incorrect 0-10V wiring. Incompatible dimmer or fixture.	Verify 0-10V wiring connections. Ensure connected fixture and dimmer are 0-10V compatible.

If the problem persists after attempting these solutions, contact LEDONE customer support for further assistance.

6. Espesifikasyon

Karakteristik	Detay
Mak	LEDONE
Nimewo Modèl	0-10V DIMMING (LOD-BRI810-B-D)
Koulè	Blan
Sous pouvwa	Corded Electric (120-277 Vac)
Maksimòm Range	20 pye
Kalite aliye	Mi mòn
Ang deteksyon	360 Degre
Tanperati Fonksyònman	-40°F pou 158°F
Dimansyon pwodwi	4.17 x 1.6 x 1.46 pous
Pwa atik	1 liv

7. Enfòmasyon sou Garanti

LEDONE products are manufactured to high standards. For specific warranty terms and conditions applicable to your Microwave Motion Sensor, please refer to the documentation included with your purchase or visit the official LEDONE website. LEDONE is based in California and aims to provide quality products and services.

8. Sipò pou Kliyan

For technical assistance, troubleshooting beyond this manual, or inquiries regarding your LEDONE Microwave Motion Sensor, please contact LEDONE customer support.

You can typically find contact information on the LEDONE official websit la oubyen atravè magazen kote yo te achte pwodwi a.

Resous sou entènèt: Vizite la LEDONE Store on Amazon pou plis enfòmasyon sou pwodwi ak sipò.

LEDONE 0-10V DIMMING (LOD-BRI810-B-D)