Kyocera (Old Ryobi) Professional Winch AWI62 685751A - Instruction Manual

1. Pwodwi souview

The Kyocera (formerly Ryobi) AWI62 685751A is a professional-grade, compact, and lightweight electric winch designed for lifting applications. It features a maximum lifting capacity of 60kg and comes equipped with a 4mm x 15m wire rope. Key safety features include a double brake system and mechanisms to prevent acceleration, twisting, and reverse winding. The integrated latch lock hook automatically secures loads once engaged.

Image: The Kyocera AWI62 electric winch shown in a typical construction setting, actively lifting materials. This illustrates its compact design and operational use.

2. Enfòmasyon sou Sekirite

Always prioritize safety when operating the winch. Failure to follow safety guidelines can result in serious injury or equipment damage.

• Li Manyèl la: Thoroughly read and understand all instructions before installation and operation.
• Kapasite chaj: Never exceed the maximum lifting capacity of 60kg. Overloading can cause structural failure.
• Enstalasyon an sekirite: Ensure the winch is securely mounted to a stable structure capable of supporting the winch's weight plus the maximum load.
• Inspect Wire Rope: Before each use, inspect the wire rope for fraying, kinks, corrosion, or other damage. Replace the wire rope if any damage is found.
• Zòn klè: Keep the work area clear of personnel and obstructions during operation.
• Ekipman Pwoteksyon Pèsonèl (PPE): Wear appropriate PPE, including safety helmets, gloves, and safety shoes.
• Sous pouvwa: Ensure the power source matches the winch's requirements (AC100V, 50/60Hz).
• Ijans Stop: Familiarize yourself with the location and operation of the emergency stop function.

Image: This diagram highlights the integrated safety features of the winch, such as mechanisms to prevent over-winding, reverse winding, acceleration, and twisting, along with the double brake system.

3. Enstalasyon ak Enstalasyon

Proper setup is essential for safe and efficient operation.

3.1 Debalaj ak enspeksyon

• Ak anpil atansyon retire tout eleman nan anbalaj la.
• Verify that all accessories are present: operation switch (with 10m cord), pre-installed 4mm x 15m wire rope, and swivel hook.
• Inspect the winch and all components for any signs of shipping damage. Do not use if damaged.

3.2 Monte treuil la

The winch is designed for hanging installation. Ensure the mounting point is structurally sound and can safely support the winch and its maximum load.

• Use appropriate fasteners and mounting hardware (not included) suitable for your specific installation environment.
• Mount the winch securely, ensuring it is level and stable.

3.3 Connecting the Operation Switch

The wired operation switch connects to the winch via a 10m cord.

• Connect the operation switch cord to the designated port on the winch.
• Ensure the connection is secure to prevent accidental disconnection during operation.

3.4 Wireless Remote Control Pairing (If Applicable)

If your model includes a wireless remote control, follow these steps for pairing. Note: The standard model includes a wired operation switch.

4. Operasyon Enstriksyon

Follow these steps for safe and effective operation of your winch.

4.1 Verifikasyon Pre-Operasyon

• Confirm the winch is securely mounted.
• Inspect the wire rope and hook for any damage.
• Asire w ke chaj la pa depase 60kg.
• Clear the lifting path of any obstacles or personnel.

4.2 Engaging the Latch Lock Hook

Imaj: Yon gwo plan view of the latch lock hook. To open the hook, press down on the lever. When a load is applied, the hook automatically closes and locks, ensuring secure attachment.

• To open the hook, press down on the lever.
• Tache chaj la byen nan zen an.
• Once a load is applied, the hook will automatically close and lock, preventing accidental detachment.

4.3 Leve ak Desann

• Use the UP/DOWN buttons on the operation switch to control the lifting and lowering of the load.
• Operate smoothly, avoiding sudden movements.
• Monitor the load and wire rope throughout the operation.
• The winch operates at a lifting speed of 46cm/s.

5. Antretyen

Antretyen regilye asire lonjevite ak operasyon an sekirite nan treuil ou a.

5.1 Wire Rope Inspection and Replacement

The wire rope is a critical component and must be inspected regularly. Replace the wire rope if it shows signs of wear, damage, or corrosion.

• Inspect the entire length of the wire rope for broken strands, kinks, crushing, birdcaging, or any significant deformation.
• Check for signs of corrosion or excessive wear.
• If more than 10% of the wire strands are broken in any section, or if the rope is significantly deformed or corroded, replacement is necessary.

5.2 Netwayaj Jeneral ak Lubrifikasyon

• Keep the winch clean and free from dirt, debris, and moisture.
• Periodically lubricate moving parts as recommended in the full manual (if available).

NAN. Depanaj

Seksyon sa a adrese pwoblèm komen ou ka rankontre.

6.1 Winch Not Operating

• Tcheke pouvwa: Ensure the winch is properly connected to a functioning power outlet (AC100V).
• Chanjman operasyon: Verify the operation switch cord is securely connected and the switch itself is not damaged.
• Pwoteksyon Surcharge: The winch may have an overload protection mechanism. If overloaded, allow it to cool down before attempting operation again.

6.2 Wire Rope Issues

• Tangled/Uneven Winding: Ensure the wire rope is winding evenly onto the drum. Uneven winding can cause tangles or damage.
• Damaged Rope: If the wire rope is damaged (frayed, kinked), it must be replaced immediately. Refer to the "Wire Rope Replacement" section.

Pou pwoblèm ki pa kouvri isit la, tanpri kontakte sèvis kliyan.

7. Espesifikasyon

8. Garanti ak sipò

8.1 Enfòmasyon sou Garanti

Pwodwi sa a vini ak yon 1-ane garanti from the date of purchase. The warranty covers defects in materials and workmanship under normal use. Please ensure the product is used according to its intended purpose as outlined in this manual. Misuse or unauthorized modifications will void the warranty.

8.2 Sipò pou Kliyan

For technical assistance, parts, or warranty claims, please contact Kyocera customer support. Refer to your purchase documentation for specific contact details or visit the official Kyocera websit.

Kyocera Official Websit: www.kyocera.co.jp