Ikea BAGGANAS 703.384.18 Stainless Steel Handle Instruction Manual

1. Pwodwi souview

The Ikea BAGGANAS 703.384.18 is a set of two stainless steel handles designed for cabinets and drawers. These handles offer a modern and clean aesthetic, suitable for various interior styles. Each handle measures 143mm in length and features a durable stainless steel finish.

• Set includes 2 BAGGANAS handles.
• Dimensions: Length 143 mm, Width 9 mm, Depth 31 mm.
• Required drilled hole diameter: 5 mm.
• Hole spacing (center-to-center): 128 mm.
• Finish: Stainless steel.

2. Enfòmasyon sou Sekirite

Please read all instructions carefully before installation. Keep small parts and packaging materials away from children. Always use appropriate safety gear, such as eye protection, when drilling. Ensure the mounting surface is suitable for drilling and can support the handle securely.

3. Pake kontni

• 2 x Ikea BAGGANAS Handles (Model: 703.384.18)
• Mounting screws (typically included with Ikea handles)

4. Enstalasyon ak Enstalasyon

Zouti obligatwa:

• Kreyon
• Mezire tep oswa règ
• Fè egzèsis ak yon ti moso 5 mm
• Screwdriver (appropriate for the provided screws)

Etap enstalasyon:

1. Mezire ak make: Determine the desired position for your handle on the cabinet door or drawer front. Using a measuring tape and pencil, mark two points 128 mm apart (center-to-center) where the screws will go. Ensure the marks are level and centered as desired.
2. Fè twou pilòt: Carefully drill pilot holes at the marked points using a 5 mm drill bit. Drill straight through the material to avoid splintering.
3. Tache Manch: Align the handle with the drilled holes. Insert the mounting screws from the inside of the cabinet door or drawer and thread them into the handle.
4. Sere boulon vis: Using a screwdriver, tighten the screws until the handle is firmly secured. Do not overtighten, as this can damage the cabinet material or the handle.

This image displays the Ikea BAGGANAS handle, highlighting its sleek stainless steel finish and rectangular design. The handle measures 143mm in length and is ready for installation.

5. Opere

Once installed, the BAGGANAS handle functions as a pull for opening and closing cabinet doors or drawers. Grip the handle firmly and apply gentle force to operate the furniture component.

6. Antretyen ak Swen

To maintain the appearance and longevity of your stainless steel handles, follow these care instructions:

• Netwayaj: Wipe the handles regularly with a soft cloth damprense avèk dlo oswa yon solisyon netwayaj dou ki pa abrazif.
• Evite pwodwi chimik piman bouk: Do not use abrasive cleaners, steel wool, or chemical solvents, as these can scratch or damage the stainless steel finish.
• Siye: Dry the handles immediately after cleaning to prevent water spots.

NAN. Depanaj

• Manch ki lach: If the handle becomes loose, gently tighten the mounting screws from the inside of the cabinet or drawer using an appropriate screwdriver. Do not overtighten.
• Rayures: Minor surface scratches on stainless steel may sometimes be reduced using a specialized stainless steel polish and a soft cloth, following the product's instructions. Deep scratches may require professional attention or replacement.

8. Espesifikasyon

9. Garanti ak sipò

For information regarding warranty coverage or product support, please refer to your purchase receipt or contact the retailer where the product was purchased. You may also visit the official Ikea website for general customer service and support information.