WEELMOTION Hoverboard Go-Kart Seat Attachment User Manual

1. Entwodiksyon

Thank you for choosing the WEELMOTION Hoverboard Go-Kart Seat Attachment. This accessory transforms your compatible self-balancing scooter into a fun and easy-to-control go-kart. Please read this manual thoroughly before assembly and operation to ensure safe and correct usage. This product is designed for use with 6.5-inch, 8-inch, and 10-inch hoverboards (hoverboard not included).

2. Enfòmasyon sou Sekirite

AVÈTISMAN: Si ou pa swiv enstriksyon sekirite sa yo, ou ka blese gravman oswa domaje materyèlman.

• Always wear appropriate safety gear, including a helmet, knee pads, and elbow pads, when operating the go-kart.
• Adult supervision is required for children operating this product.
• Do not exceed the maximum weight limit of 100 kg (220 lbs).
• Operate the go-kart in safe, open areas away from traffic, pedestrians, and obstacles. Avoid uneven surfaces, steep inclines, and wet conditions.
• Ensure all straps and connections are securely fastened before each use.
• Do not attempt stunts or aggressive maneuvers that could lead to loss of control.
• Regularly inspect the go-kart for any damage or loose parts before and after each use.

3. Pake kontni

Tanpri verifye ke tout konpozan yo prezan:

• Go-Kart Frame (main body with adjustable length)
• Syèj
• Control Bars (2 units)
• Front Wheel Assembly (with 360° flexible PU wheel)
• Attachment Straps (4 units, plus 2 extra enhanced straps)
• Materyèl asanblaj (vis, nwa, rondelle)
• Tools (e.g., wrench, hex key)
• Manyèl itilizatè

Imaj 3.1: Plis paseview of the WEELMOTION Hoverboard Go-Kart Seat Attachment with key features.

4. Enstalasyon ak Asanble

Assembly typically takes less than 10 minutes. Follow these steps:

1. Atache Syèj la: Secure the seat to the main frame using the provided screws and nuts. Ensure it is firmly attached.
2. Install Control Bars: Insert the two control bars into their designated slots on the frame and tighten them securely.
3. Atache wou devan an: Connect the front wheel assembly to the adjustable front bar of the go-kart frame.
4. Adjust Frame Length: Loosen the adjustment knob on the main frame. Extend or retract the front section to the desired length, then securely tighten the knob.
5. Konekte ak Hoverboard la: Place your hoverboard onto the attachment platform. Use the provided enhanced straps to firmly secure the go-kart to your hoverboard. Ensure the straps are tight and the hoverboard is stable.

Image 4.1: Enhanced straps for securing the go-kart to the hoverboard.

Image 4.2: The attachment is designed to fit most 6.5-inch, 8-inch, and 10-inch hoverboards.

5. Operasyon Enstriksyon

Once assembled and securely attached to your hoverboard, operate the go-kart as follows:

• Pozisyon Chita: Sit comfortably in the seat with your feet on the footrests and hands on the control bars.
• Mouvman pou pi devan: Push both control bars down simultaneously to move forward.
• Mouvman bak: Pull both control bars up simultaneously to move backward.
• Vire agoch: Push the right control bar down and pull the left control bar up to turn left.
• Vire adwat: Push the left control bar down and pull the right control bar up to turn right.
• Frenaj: Return both control bars to a neutral position to stop.

Image 5.1: Visual guide for operating the go-kart using the control bars.

Image 5.2: The 360° flexible PU front wheel allows for smooth turning and maneuverability.

6. Ajisteman

The go-kart features an adjustable frame length to accommodate various rider heights.

• Ajisteman longè: Locate the adjustment knob on the main frame. Loosen the knob, slide the front section of the frame to extend or shorten the length (between 31-44 inches), and then securely tighten the knob.

Image 6.1: The go-kart frame features an adjustment knob for varying lengths.

7. Antretyen

To ensure the longevity and safe operation of your go-kart attachment:

• Netwayaj: Siye ankadreman an ak chèz la ak piblisiteamp twal. Evite pwodwi chimik piman bouk yo.
• Enspeksyon: Regularly check all bolts, screws, and straps for tightness. Tighten any loose fasteners.
• Ranplasman senti: The attachment includes extra straps. Replace worn or damaged straps immediately to maintain secure attachment to the hoverboard.
• Depo: Store the go-kart in a dry, cool place away from direct sunlight and extreme temperatures.

NAN. Depanaj

Si ou rankontre pwoblèm, gade solisyon komen sa yo:

• Go-Kart feels unstable: Ensure all attachment straps are tightly secured to the hoverboard. Check that all frame connections are tightened.
• Difficulty in steering/movement: Verify that the control bars are properly installed and move freely. Ensure the hoverboard itself is functioning correctly.
• Bwi etranj: Inspect for any loose parts or debris caught in the wheels or frame. Tighten any loose components.

Si pwoblèm pèsiste, kontakte sipò kliyan.

9. Espesifikasyon

10. Enfòmasyon sou Garanti

WEELMOTION products are manufactured to high-quality standards. For specific warranty details regarding your Hoverboard Go-Kart Seat Attachment, please refer to the warranty card included with your purchase or contact WEELMOTION customer support directly. Keep your proof of purchase for warranty claims.

11. Sipò pou Kliyan

For any questions, assistance, or to report issues with your WEELMOTION Hoverboard Go-Kart Seat Attachment, please contact our customer service team. Refer to the contact information provided on the product packaging or our official websit.

Manufacturer: WEELMOTION

Manufacturer Contact Information: Hangzhou, Zhejiang 310052, CN