ABB AD1NO-R-15m Modular Device Switch User Manual

1. Entwodiksyon

The ABB AD1NO-R-15m is an analog time switch designed for daily scheduling with a 15-minute switching interval. This modular device features one normally open (NO) channel and includes a power reserve function to maintain timekeeping during power outages. It is suitable for various electrical scheduling applications.

Figi 1: Devan view of the ABB AD1NO-R-15m Modular Device Switch, highlighting its compact design and control interface.

2. Enstriksyon Sekirite Enpòtan

Please read and understand all safety instructions before installing, operating, or maintaining this device. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Se sèlman pèsonèl kalifye ki dwe fè enstalasyon ak antretyen.
• Disconnect power before installation, maintenance, or servicing to prevent electric shock.
• Ensure all wiring complies with local and national electrical codes and regulations.
• Pa sèvi ak aparèy la si li sanble domaje.
• This device is designed for indoor use in dry environments.

3. Pwodwi souview

The AD1NO-R-15m is an analog time switch with the following key features:

• Rele analòg: For setting daily schedules.
• 15-Minute Switching: Allows precise control over connected circuits with 15-minute intervals.
• 1 Normally Open (NO) Channel: Controls one electrical circuit.
• Rezèv pouvwa: Maintains timekeeping for a specified duration during power interruptions.
• Konsepsyon modilè: Suitable for integration into standard electrical panels on a DIN rail.

Note: The power reserve ensures the timer continues to function accurately even if the main power supply is temporarily lost.

4. Enstalasyon ak Enstalasyon

Follow these steps for proper installation of the AD1NO-R-15m Modular Device Switch:

1. Dekoneksyon pouvwa: Before beginning, ensure the main power supply to the installation area is completely disconnected at the circuit breaker or fuse box. Verify with a voltage tèsteur.
2. Montaj: Mount the AD1NO-R-15m switch onto a standard DIN rail within an appropriate electrical enclosure. Ensure it is securely fastened.
3. Fil elektrik:
   • Connect the incoming phase (L) and neutral (N) wires to the designated input terminals of the time switch.
   • Connect the load wire from the output terminal of the time switch to the device you wish to control.
   • Ensure all connections are tight and secure. Refer to the wiring diagram printed on the device for specific terminal identification.
4. Retablisman pouvwa: Once all connections are verified and secure, close the electrical enclosure and restore power to the circuit.

Always consult a qualified electrician for installation if you are unsure or lack experience with electrical wiring.

5. Operasyon Enstriksyon

To set the time and program the switching schedule:

1. Mete tan aktyèl la: Rotate the analog dial clockwise until the current time aligns precisely with the reference arrow or marker on the device's face.
2. Program Switching Times: The dial features small segments around its perimeter. Push in the segments corresponding to the times you want the connected circuit to be ON. Pull out segments for OFF periods. Each segment typically represents a 15-minute interval.
3. Operating Mode (if applicable): If your model includes a manual override switch (e.g., ON, AUTO, OFF), ensure it is set to "AUTO" for programmed operation.

The internal power reserve will automatically charge when the device is powered, ensuring continued accurate timekeeping during short power outages.

6. Antretyen

The AD1NO-R-15m is designed for minimal maintenance. Follow these guidelines to ensure optimal performance:

• Netwayaj: Keep the device clean and free from dust. Use a dry, soft cloth for cleaning. Do not use liquid cleaners, abrasive materials, or solvents.
• Enspeksyon: Periodically inspect the wiring connections for tightness and any signs of wear, corrosion, or damage. Ensure all terminals are secure.
• Kondisyon anviwònman: Asire w ke anviwònman operasyon an rete nan limit tanperati ak imidite espesifye yo pou anpeche domaj.

There are no user-serviceable parts inside this device. Do not attempt to open the casing, paske sa ap anile garanti a epi li ka ekspoze ou a danje elektrik.

NAN. Depanaj

If you encounter issues with your AD1NO-R-15m switch, refer to the table below for common problems and solutions:

If the problem persists after attempting these solutions, please contact ABB customer support for further assistance.

8. Espesifikasyon teknik

• Modèl: AD1NO-R-15m
• Nimewo Pati: 2CSM222461R1000
• Manifakti: FIG
• Kalite: Chanjman tan analòg
• Switching Interval: 15 minit
• Chanèl: 1 Nòmalman Louvri (NON)
• Rezèv pouvwa: Wi
• Pwa atik: Apeprè 2.82 ons (80 gram)
• Dimansyon pwodwi: Apeprè 3.54 x 0.69 x 2.6 pous (90 x 17.5 x 66 mm)
• Kalite montaj: DIN Rail (Wall Mount)
• Eleman ki enkli: Modular device switch
• Batri obligatwa: No (features internal power reserve)
• ASIN: B09BP4PFMF
• Premye disponib: 21 desanm 2024

Remak: Espesifikasyon yo sijè a chanje san avètisman davans.

9. Garanti ak sipò

Enfòmasyon sou Garanti

For detailed warranty terms and conditions, please refer to the official ABB warranty statement provided with your purchase or visit the official ABB websit la. Kenbe prèv acha ou pou reklamasyon garanti.

Sipò pou Kliyan

For technical assistance, troubleshooting, or service inquiries, please contact ABB customer support through their official websit la oswa enfòmasyon kontak ki nan anbalaj pwodwi ou a.

ABB Official Websit: www.abb.com