ONVIAN Bicycle Motorcycle Anti-Theft Alarm with 2 Remotes

1. Entwodiksyon

This manual provides comprehensive instructions for the installation, operation, and maintenance of your ONVIAN Bicycle Motorcycle Anti-Theft Alarm. Please read this manual carefully before use to ensure proper functionality and safety.

2. Pake kontni

• Alarm Unit (Main Host)
• Remote Kontwòl (x2)
• Double-sided Tape for Installation
• Lyen kab
• User Manual (Japanese, refer to this document for English instructions)

3. Pwodwi Features

• Doub Kontwòl Remote: The kit includes two remote controls that can simultaneously operate the alarm unit. Initial pairing may be required.
• Volim reglabl: Features 3-level volume adjustment with a maximum output of 113dB, allowing users to select an appropriate sound level for different environments.
• Sansiblite reglabl: Offers 7 sensitivity levels (Do, Re, Mi, Fa, Sol, La, Si) to prevent accidental triggers while ensuring effective detection. The factory default is the highest level (Do).
• Fonksyon SOS: When activated (default OFF), the alarm automatically calls for help if the bicycle tilts beyond 45 degrees in a non-alert state, enhancing outdoor cycling safety.
• Fonksyon Rechèch Veyikil: Use the bell button on the remote control to locate your parked vehicle.
• Enstalasyon fasil: Simple installation using double-sided tape or cable ties, suitable for various applications including bicycles, motorcycles, doors, and windows.

4. Enstalasyon ak Enstalasyon

The alarm unit can be installed using either the provided double-sided tape or cable ties. For optimal anti-theft effectiveness, it is recommended to install the alarm in a concealed location not easily accessible from the outside. Ensure the installation location is not exposed to water to maintain alarm effectiveness.

Etap enstalasyon:

1. Clean the surface where the alarm unit will be attached.
2. Peel off the protective film from the double-sided tape and firmly press the alarm unit onto the desired location (e.g., bicycle frame, seat post, door/window frame).
3. Alternatively, use the provided cable ties to secure the alarm unit around a suitable part of your bicycle, such as the handlebar or seat post. Trim any excess cable tie length.

Video: Installation and Basic Operation

5. Operasyon Enstriksyon

5.1 Ame ak Dezame

• Bra: Peze a bouton fèmen on the remote control once. The alarm unit will emit a 'Beep' sound, indicating it is armed.
• Dezame: Peze a bouton degaje on the remote control once. The alarm unit will emit a 'Beep' sound, indicating it is disarmed.

5.2 Ajisteman Volim

The alarm offers 3 adjustable volume levels. To adjust the volume:

1. Peze epi kenbe la bouton klòch on the remote control until the LED indicator on the remote turns off and then re-illuminates. The alarm unit will continuously beep during this process (ignore the alarm sound).
2. While in setting mode, repeatedly press the bouton klòch to cycle through the 3 volume levels (high to low). Each press will change the volume.
3. Release the button to save the desired volume level.

5.3 Ajisteman sansiblite

The alarm has 7 adjustable sensitivity levels. To adjust the sensitivity:

1. Peze epi kenbe la bouton degaje on the remote control until the LED indicator on the remote turns off and then re-illuminates. The alarm unit will continuously beep during this process (ignore the alarm sound).
2. While in setting mode, repeatedly press the bouton degaje to cycle through the 7 sensitivity levels (high to low). Each press will change the sensitivity, indicated by a different number of beeps (e.g., 7 beeps for highest, 1 beep for lowest).
3. Release the button to save the desired sensitivity level.

5.4 Fonksyon SOS

The SOS function is OFF by default. To activate or deactivate it:

1. Peze epi kenbe la bouton klòch on the remote control until the LED indicator on the remote turns off and then re-illuminates. The alarm unit will continuously beep during this process.
2. Peze a lightning bolt button once. The alarm unit will emit one 'Bi' sound, entering calibration mode.
3. The alarm unit will then emit 5 'Bi' beeps if the SOS function is correctly adjusted and turned ON. If it emits two long 'Bi...Bi' sounds, it indicates a calibration error, and the SOS function will not be ON. The host needs to be placed in a static mode before performing SOS calibration.

When the SOS function is ON, if the bicycle tilts beyond 45 degrees in a non-alert state, the alarm will automatically sound to call for help.

5.5 Fonksyon Rechèch Veyikil

Peze a bouton klòch on the remote control to make the alarm unit emit a sound, helping you locate your vehicle in a crowded area.

6. Battery Information & Replacement

The alarm unit and remote controls come with pre-installed batteries.

• Alarm Unit Battery: 3 x AAA dry cell batteries. Expected life: 1-3 months with daily use, approximately 6 months in continuous standby.
• Batri Remote Control: 1 x 12V/27A alkaline battery. Expected life: Over 1 year with daily use (assuming 5 remote uses per day).

Ranplasman batri:

If the remote control cannot operate the main unit, reinsert the batteries or replace them with new ones. After replacing batteries, re-match the alarm unit and remote control. Refer to the original Japanese manual for detailed matching instructions if needed.

NAN. Depanaj

• Alam lan pa reponn a telekòmand lan: Check remote control battery. Replace if necessary and re-match the remote with the alarm unit.
• Alam lan pa sonnen oswa li twò ba: Check alarm unit batteries. Replace if necessary. Adjust volume settings as described in Section 5.2.
• Fo alam: Adjust sensitivity settings as described in Section 5.3. Ensure the alarm is installed in a stable location.
• SOS function not working: Ensure the SOS function is activated (ON) as described in Section 5.4. Ensure the alarm unit is calibrated correctly.

8. Espesifikasyon

9. Prekosyon sekirite

• Do not expose the alarm unit to direct water contact to ensure optimal performance, as waterproof performance may vary.
• Kenbe soti nan atenn timoun yo.
• Do not attempt to disassemble or modify the device, as this may void the warranty and cause malfunction.
• Asire w ke pil yo mete ak polarite ki kòrèk la.
• Jete pil yo itilize yon fason responsab selon règleman lokal yo.

10. Garanti & Sipò

For warranty information or technical support, please refer to the product packaging or contact ONVIAN customer service. Keep your purchase receipt as proof of purchase.