ANENG ST180 4000 Count Digital Clamp Manyèl Itilizatè Multimèt

Entwodiksyon

The ANENG ST180 is a compact, high-precision digital clamp multimeter designed for a wide range of electrical measurements. It features an auto-ranging function and can measure AC/DC voltage, AC current, resistance, capacitance, frequency, and perform diode and NCV (Non-Contact Voltage) tests. This manual provides essential information for safe and effective use of your device.

Enfòmasyon sou Sekirite

Always observe basic safety precautions when using this device to avoid electric shock, injury, or damage to the meter or equipment under test. Read all instructions carefully before use.

• Pa depase valè maksimòm antre yo espesifye pou chak seri mezi.
• Pa sèvi ak mèt la si li sanble domaje oswa si izolasyon sou fil tès yo konpwomèt.
• Pran anpil prekosyon lè w ap travay ak voltagki pi wo pase 60V DC oswa 30V AC RMS, paske sa yo poze yon danje pou elektwo-elektwonik.
• Asire w ke mèt la nan fonksyon ak nan bon ranje a anvan ou pran mezi yo.
• Ranplase pil yo lè endikatè pil fèb la parèt pou asire lekti yo egzak.

Kontni pake

Verifye ke tout atik yo prezan nan pakè a:

• 1 x ANENG ST180 Digital Clamp Miltimèt
• 1 x Pè fil tès (wouj ak nwa)
• 1 x Manyèl Itilizatè (Angle)

Image: The ANENG ST180 Clamp Multimeter package contents, including the meter, red and black test leads, and protective caps.

Pwodwi souview

The ANENG ST180 is a versatile tool for electrical diagnostics. It features a compact design, an easy-to-read backlit display, and various measurement capabilities.

Image: Detailed diagram of the ANENG ST180 Clamp Multimeter, highlighting its components such as the jaw, function dial, LCD backlight, test lead sockets, and buttons.

Karakteristik kle:

• Multi-function Clamp Mèt: Measures AC current, AC/DC voltage, resistance, capacitance, frequency, diode, and NCV.
• Segondè Precision: Auto-ranging capability for accurate measurements without breaking the circuit.
• Ekspozisyon klere ak ekleraj dèyè: Clear 4000-count display with switchable backlight for visibility in various lighting conditions.
• Done kenbe: Li bloke lekti ki parèt la pou anrejistreman fasil.
• Reliable and Efficient: Features an LED buzzer alarm for continuity and NCV detection.
• Konsepsyon kontra enfòmèl ant: Small size for easy portability and handling.

Image: The ANENG ST180 Clamp Multimeter showcasing its high precision and ability to measure AC current, AC/DC voltage, resistance, capacitance, diode, non-contact induction, on-off buzzer, Hz, and live detection.

Enstalasyon

Enstalasyon batri:

The ANENG ST180 requires two AAA 1.5V batteries (not included). To install or replace batteries:

1. Jwenn kouvèti konpatiman pil la sou dèyè mèt la.
2. Sèvi ak yon tournevis pou louvri lòj batri a.
3. Insert two AAA 1.5V batteries, observing the correct polarity (+ and -).
4. Ranplase kouvèti lòj batri a epi an sekirite li ak vis la.

Konekte fil tès yo:

Pou voltage, resistance, capacitance, frequency, and diode measurements, connect the test leads:

• Mete fil tès nwa a nan priz antre "COM" (Komen) an.
• Insert the red test lead into the "VΩHz" input jack.

Enstriksyon Operasyon

Limen/Etenyen:

Rotate the function dial from the "OFF" position to any desired measurement function to power on the meter. To power off, rotate the dial back to the "OFF" position.

Seleksyon Fonksyon:

The rotary dial allows you to select different measurement functions. For functions with multiple modes (e.g., AC/DC voltage), peze bouton an SEL/V bouton pou sikile atravè mòd yo.

Mezi Kouran AC (Clamp Jaw):

Pou mezire aktyèl AC:

1. Vire bouton fonksyon an sou la A~ pozisyon.
2. Press the jaw open trigger to open the clamp machwè.
3. Enclose a single conductor (not a power cord with multiple wires) within the clamp machwè.
4. Li valè kouran AC a sou ekran an.

VoltagMezi (AC/DC):

Pou mezire AC oswa DC voltage:

1. Vire bouton fonksyon an sou la V~ (Volim AC)tage) oswa V- (DC Voltage) position. If combined, press SEL/V pou chanje.
2. Connect the red test lead to the positive (+) side of the circuit and the black test lead to the negative (-) side.
3. Li voltage valè sou ekspozisyon an.

Mezi rezistans:

Pou mezire rezistans:

1. Vire bouton fonksyon an sou la Ω pozisyon.
2. Asire w ke sikwi a pa gen enèji anvan ou konekte fil tès yo atravè konpozan an.
3. Li valè rezistans nan ekspozisyon an.

Mezi kapasite:

Pou mezire kapasite:

1. Vire bouton fonksyon an sou la Kapasite position (often shared with resistance, press SEL/V).
2. Discharge the capacitor before connecting the test leads.
3. Konekte fil tès yo atravè kondansateur a.
4. Li valè a kapasite sou ekspozisyon an.

Mezi frekans:

Pou mezire frekans:

1. Vire bouton fonksyon an sou la Hz position (often shared, press SEL/V).
2. Connect the test leads across the signal source.
3. Li valè frekans lan sou ekran an.

Tès dyòd:

To perform a diode test:

1. Vire bouton fonksyon an sou la Dyòd position (often shared, press SEL/V).
2. Konekte fil tès wouj la nan anod la epi Konekte fil tès nwa a nan katod dyòd la.
3. Ekran an ap montre volim pou pi devan an.tage gout. Ranvèse fil yo pou tcheke si gen sikwi louvri.

NCV (Vol ki pa gen kontaktage) Detection:

Fonksyon NCV detekte AC voltage san kontak fizik.

1. Vire bouton fonksyon an sou la NCV pozisyon.
2. Bring the top of the meter near the conductor or outlet.
3. The meter will beep and the LED will flash, with the frequency increasing as it gets closer to the AC voltage sous.

Image: The ANENG ST180 Clamp Multimeter demonstrating its NCV (Non-Contact Voltage) detection feature, showing the meter detecting voltage near an electrical outlet with an alarm buzzer sound.

Done kenbe:

Peze a H/BL button (single press) to hold the current reading on the display. Press it again to release the hold.

Backlight and Flashlight:

• Ekleraj: Long peze la H/BL bouton pou limen oswa etenn limyè dèyè ekran an.
• Flach: Long peze la SEL/V button to activate the built-in flashlight. Long press again to turn it off.

Antretyen

Netwayaj:

Siye mèt la avèk yon twal sèk epi mou. Pa sèvi ak pwodui abrazif oswa solvang.

Ranplasman batri:

When the low battery indicator appears on the display, replace the batteries as described in the "Setup" section to ensure accurate measurements and proper operation.

Depo:

If the meter is not used for an extended period, remove the batteries to prevent leakage and damage. Store the device in a cool, dry place away from direct sunlight.

Depanaj

If you encounter issues with your ANENG ST180, refer to the following common problems and solutions:

• Pa gen ekspozisyon/Kontè a pa limen: Tcheke enstalasyon pil yo epi asire w pil yo pa fin itilize. Ranplase yo si sa nesesè.
• Lekti ki pa kòrèk: Ensure test leads are properly connected. Verify the correct function and range are selected. Replace batteries if the low battery indicator is on.
• No NCV Detection: Ensure the NCV function is selected. The sensor needs to be close to an AC voltage sous.
• Sonèt Kontinuite a pa fonksyone: Ensure the continuity function is selected. Check if the circuit is de-energized.

Si pwoblèm pèsiste, kontakte sipò kliyan pou plis asistans.

Espesifikasyon

The following table details the technical specifications of the ANENG ST180 Digital Clamp Miltimèt:

Image: The ANENG ST180 Clamp Multimeter with its physical dimensions labeled in millimeters and inches.

Garanti ak sipò

This product comes with a standard manufacturer's warranty. For warranty claims, technical support, or service inquiries, please refer to the contact information provided with your purchase documentation or visit the official ANENG websit.

Tanpri konsève prèv acha ou a pou rezon garanti.