Hayward W3H135FDP H-Series Propane Pool Heater User Manual

1. Entwodiksyon

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Hayward W3H135FDP H-Series Propane Pool Heater. Please read this manual thoroughly before attempting to install or operate the heater. Keep this manual for future reference.

The Hayward H-Series heater is designed for heating above-ground pools using propane gas. It features a durable cupro nickel heat exchanger, an intuitive electronic control panel, and forced-draft combustion for reliable performance in various weather conditions.

Devan view of the Hayward W3H135FDP H-Series Propane Pool Heater, highlighting its 135,000 BTU capacity, propane fuel type, and suitability for above-ground pools.

2. Enfòmasyon enpòtan sou sekirite

AVÈTISMAN: Enstalasyon, ajisteman, chanjman, sèvis oswa antretyen move ka lakòz domaj nan pwopriyete, blesi oswa lanmò. Li enstriksyon enstalasyon, opere ak antretyen yo byen anvan ou enstale oswa fè sèvis pou ekipman sa a.

• Toujou dekonekte kouran anvan ou fè sèvis.
• Asire bon vantilasyon alantou aparèy chofaj la.
• Pa sere oswa itilize gazolin oswa lòt vapè ak likid ki ka pran dife nan vwazinaj sa a oswa nenpòt lòt aparèy.
• Enstalasyon ak sèvis dwe fèt pa yon enstalatè ki kalifye, ajans sèvis, oswa founisè gaz.
• Aparèy chofaj sa a fèt pou propane gas only. Do not attempt to use natural gas.
• Kenbe timoun ak bèt kay lwen aparèy chofaj la.

3. Pake kontni

Verify that all components are present before beginning installation. If any parts are missing or damaged, do not proceed with installation and contact Hayward customer support.

• Hayward W3H135FDP H-Series Propane Pool Heater unit
• Manyèl Itilizatè (dokiman sa a)
• Installation hardware (specific items may vary, refer to packing list)

4. Enstalasyon ak Enstalasyon

Installation must comply with all local codes and ordinances. In the absence of local codes, refer to the National Fuel Gas Code (ANSI Z223.1/NFPA 54) or the Natural Gas and Propane Installation Code (CSA B149.1).

4.1 Kondisyon pou Kote yo

• Install the heater outdoors, on a level, non-combustible surface.
• Maintain adequate clearances from combustible materials and other equipment. Refer to the heater's data plate for specific clearance requirements.
• Ensure the location allows for proper ventilation and drainage.
• Avoid locations where the heater may be exposed to excessive wind or spray from the pool.

4.2 Koneksyon plonbri

Connect the heater to your pool's filtration system. The heater should be installed after the filter and before any chemical feeders.

• Sèvi ak ekipman plonbri ak selan ki apwopriye pou anpeche flit.
• Ensure proper water flow through the heater. Insufficient flow can cause damage.

Side view of the heater, illustrating the plumbing inlet/outlet and the forced-draft combustion system.

4.3 Gas Connections (Propane Only)

ENPÒTAN: This heater is factory-set for propane gas. Do not attempt to convert it to natural gas. Gas connections must be made by a qualified professional.

• Connect the propane supply line to the heater's gas inlet.
• Ensure all gas connections are tight and leak-free. Use a leak detection solution to check for leaks.
• Install a manual gas shut-off valve upstream of the heater.

4.4 Koneksyon elektrik

Electrical wiring must be performed by a qualified electrician in accordance with all local codes and the National Electrical Code (NFPA 70).

• Asire w ke aparèy chofaj la byen konekte ak tè a.
• Connect the heater to a dedicated circuit with appropriate overcurrent protection.

5. Operasyon Enstriksyon

5.1 Premye demaraj

1. Ensure the pool pump is running and there is adequate water flow through the heater.
2. Open the manual gas shut-off valve to supply propane to the heater.
3. Turn on the electrical power to the heater.
4. The electronic control panel will illuminate.

5.2 Setting Desired Temperature

Use the intuitive electronic control panel to set your desired pool temperature.

1. Press the "Mode" button to select the pool heating function.
2. Use the up/down arrow buttons to adjust the target temperature.
3. The heater will automatically ignite and begin heating the water to the set temperature.

The electronic control panel for setting and monitoring pool temperature.

5.3 Fèmen aparèy chofaj la

1. To temporarily stop heating, turn off the heater via the control panel.
2. For extended shutdown or servicing, close the manual gas shut-off valve and turn off the electrical power to the heater.

6. Antretyen

Regular maintenance ensures optimal performance and longevity of your Hayward H-Series heater. Always disconnect power and gas supply before performing any maintenance.

6.1 Verifikasyon woutin

• Chak mwa: Inspect the area around the heater for debris, obstructions, or signs of leaks.
• Sezon: Check the heat exchanger for scale buildup or corrosion. If necessary, clean according to manufacturer guidelines or consult a qualified service technician.
• Ensure proper water chemistry in your pool to prevent damage to the heater's components.

6.2 Winterization

In areas subject to freezing temperatures, proper winterization is crucial to prevent damage.

1. Turn off the heater and disconnect both electrical power and gas supply.
2. Drain all water from the heater's plumbing and heat exchanger. Use a shop vacuum or air compressor to ensure all water is removed.
3. Store the heater in a dry, protected area if possible, or cover it with a weather-resistant cover.

NAN. Depanaj

Anvan ou kontakte sèvis kliyan, re-view pwoblèm ak solisyon komen sa yo.

If troubleshooting steps do not resolve the issue, contact Hayward customer support or a qualified service professional.

8. Espesifikasyon

• Modèl: W3H135FDP
• Kalite gaz: Gaz pwopan
• Antre BTU: 135,000 BTU/h
• Efikasite tèmik: 82%
• Echanjeur chalè: Cupro Nickel
• Dimansyon (L x W x H): Apeprè 30.3 x 21.4 x 22.6 pous (77 x 54.4 x 57.4 cm)
• Pwa atik: Apeprè 117.5 lbs (53.3 kg)
• Kondisyon elektrik: Gade etikèt pwodwi a pou volim espesifik la.tage ak ampepòk.
• Emisyon NOx: Low NOx (meets clean air quality standards)

Product dimensions and weight for the Hayward W3H135FDP H-Series Pool Heater.

Divès views of the Hayward W3H135FDP H-Series Pool Heater, illustrating its design from different angles.

9. Garanti ak sipò

Hayward provides a limited warranty for its products. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Hayward websit.

For technical assistance, parts, or service, please contact Hayward customer support:

• Websit: www.hayward.com
• Telefòn: Refer to the Hayward websit pou nimewo kontak rejyonal yo.

When contacting support, please have your model number (W3H135FDP) and serial number ready.