1. Entwodiksyon
Thank you for choosing Lepro RGB LED Strip Lights. This manual provides detailed instructions for the safe and efficient use of your new LED strip lights. These versatile lights offer a wide range of colors and modes, perfect for enhancing various indoor environments.
Figure 1: Lepro 40ft RGB LED Strip Lights in a living room setting.
2. Ki sa ki nan bwat la
Tanpri verifye sa ki nan pake a pou asire w tout atik yo la:
- 1 x 39.4ft (12m) Non-Waterproof RGB LED Strip
- 1 x 44-kle kontwòl remote IR
- 1 x 24V Power Adapter (US Plug)
3. Enfòmasyon sou Sekirite
Read all safety instructions before installation and use. Keep this manual for future reference.
- Itilize andedan kay la sèlman: This product is designed for indoor use and is not waterproof.
- Pwovizyon pou pouvwa: Use only the provided 24V power adapter. Using an incorrect power supply may damage the product and void the warranty.
- Sifas enstalasyon: Asire w sifas enstalasyon an pwòp, sèk, epi lis pou yon pèfòmans adezif optimal.
- Koupe teren an: Only cut the LED strip at designated cut marks (every 3 LEDs). Cutting elsewhere will damage the strip.
- Evite surchof: Do not coil the LED strip tightly when powered on, as this can cause overheating.
- Timoun ak bèt kay: Keep the product and its components out of reach of children and pets.
4. Enstalasyon ak Enstalasyon
Swiv etap sa yo pou enstalasyon apwopriye:
- Prepare sifas la: Clean the desired installation surface thoroughly to remove dust, oil, or moisture. A clean, dry surface ensures strong adhesion.
- Mezire epi koupe (si sa nesesè): Unroll the LED strip and measure the required length. If shortening is needed, cut the strip only at the designated cut marks, typically indicated by a copper line and a scissor icon, every 3 LEDs.
- Tache bann lan: Peel off the backing from the 3M adhesive tape on the back of the LED strip. Carefully press the strip onto the cleaned surface, ensuring firm contact along its entire length.
- Secure with Fixing Clips (Optional): For added security, especially on textured surfaces or corners, use the provided fixing clips. Secure them at regular intervals or critical points along the strip.
- Konekte pouvwa: Connect the LED strip to the IR receiver, and then connect the IR receiver to the 24V power adapter. Plug the power adapter into a standard electrical outlet.
- Aktive kontwòl remote la: Before first use, remove the plastic insulation tab from the battery compartment of the 44-key IR remote control.
Figure 2: Visual guide for LED strip installation steps.
Figure 3: Connection diagram and remote activation.
Figure 4: 3M Adhesive and Fixing Clips.
5. Operasyon Enstriksyon
Control your LED strip lights using the included 44-key IR remote control. Ensure the remote is pointed directly at the IR receiver for optimal response.
Figure 5: 44-Key IR Remote Control Layout.
Fonksyon kontwòl remote:
- On/Off: Power button to turn the lights on or off.
- Ajisteman klète: Sèvi ak la ↑ epi ↓ buttons to increase or decrease brightness.
- Seleksyon koulè: Choose from 16 preset static colors, including Red, Green, Blue (RGB), and White.
- Koulè pou fè lakay ou: 6 programmable DIY buttons allow you to save your favorite custom color mixes.
- Peze a Brikoleur bouton.
- Sèvi ak la ↑ epi ↓ arrows next to R, G, B to adjust the intensity of each primary color.
- Peze menm bagay la Brikoleur button again to save your custom color.
- Seleksyon mòd: Select from 8 dynamic modes (e.g., Flash, Fade, Jump) to create different lighting effects.
- FLASH: Jumps between colors.
- FADE3/FADE7: Fades between 3 or 7 colors.
- JUMP3/JUMP7: Jumps between 3 or 7 colors.
- OTO: Cycles through all modes.
- RAPID/RALENT: Adjusts the speed of dynamic modes.
Figure 6: Remote control in use for ambient lighting.
6. Antretyen
Proper maintenance ensures the longevity of your LED strip lights.
- Netwayaj: Gently wipe the LED strip with a soft, dry cloth to remove dust. Do not use liquid cleaners or immerse the strip in water.
- Depo: If storing the lights for an extended period, ensure they are clean, dry, and coiled loosely to prevent damage.
- Evite koube: Do not bend the LED strip sharply, especially at the connection points, as this can damage the internal circuitry.
NAN. Depanaj
Si ou rankontre pwoblèm, gade pwoblèm ak solisyon komen sa yo:
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Limyè pa limen. |
|
|
| Kontwòl remote pa reponn. |
|
|
| Koulè yo pa kòrèk oswa yo pa konsistan. |
|
|
8. Espesifikasyon
| Karakteristik | Detay |
|---|---|
| Mak | Lepro |
| Nimewo Modèl | PR410116-RGB-US |
| Kalite sous limyè | LED (5050 SMD) |
| Koulè limyè | RGB (Red, Green, Blue) + White, 16 Multicolored Options, 6 DIY Colors |
| Longè | 39.4 pye (12m) |
| Voltage | 24 Volts (Power Adapter) |
| Wattage | 18 Watts (Max Compatible) |
| Metòd kontwòl | 44-Key IR Remote Control |
| Karakteristik espesyal | Color Changing, Dimmable, 8 Dynamic Modes |
| Itilizasyon Andedan kay la / Deyò | Andedan kay la sèlman |
| Materyèl | Kwiv, Plastik |
| Pwa atik | 9.6 ons |
| Endèks rann koulè (CRI) | 85.00 |
Figure 7: ETL Listed 24V Power Adapter.
9. Garanti & Sipò
Lepro products are designed for reliability and performance. For specific warranty details and customer support, please refer to the warranty card included with your product or visit the official Lepro websit.
Enfòmasyon pou kontakte:
- Websit: www.lepro.com (Tanpri tcheke ofisyèl la websit la pou jwenn enfòmasyon kontak ki pi ajou yo.)
- Imèl: Gade anbalaj pwodwi a oubyen websit.