HOFTRONIC Esto 2-Light GU10 Black LED Spotlight

1. Entwodiksyon

Thank you for choosing the HOFTRONIC Esto 2-Light GU10 Black LED Spotlight. This product is designed for indoor use, providing adjustable lighting with two GU10 LED bulbs. Constructed from high-quality aluminum, this spotlight offers a modern aesthetic and reliable performance. Please read this manual carefully before installation and use to ensure safe and optimal operation.

Image: The HOFTRONIC Esto 2-Light GU10 Black LED Spotlight installed on a ceiling, providing illumination in a modern interior setting.

2. Enstriksyon Sekirite

• Always disconnect the main power supply before attempting any installation, maintenance, or bulb replacement.
• Se yon elektrisyen kalifye ki ta dwe fè enstalasyon an pou asire konfòmite avèk kòd elektrik lokal yo ak estanda sekirite yo.
• This product is rated IP20 and is suitable for itilize andedan kay la sèlman. Do not expose to moisture or direct water.
• Asire voltage supply matches the product's requirements (230V AC).
• Pa depase wat maksimòm lantage of 35 Watts per GU10 LED bulb.
• Asire w ke aparèy la byen vantile pou anpeche l chofe twòp.
• Do not cover the fixture with insulating material unless specifically designed for it.

3. Bwat sa ki nan liv

Tanpri verifye ke tout konpozan yo prezan epi yo pa domaje anvan ou kontinye ak enstalasyon an.

Image: Contents of the product box, including the spotlight fixture and mounting hardware.

• 1x HOFTRONIC Esto Double Black LED Ceiling Spot Fixture
• 1x Allen kle
• 4x Vis
• 4x rondelles
• 4x ploge mi

4. Enstalasyon ak Enstalasyon

Follow these steps for safe and correct installation of your LED spotlight.

1. Prepare pou enstalasyon: Asire w ke ekipman pou kouran prensipal la nan zòn enstalasyon an koupe nan disjonktè a.
2. Make pwen perçage yo: Position the fixture on the ceiling at the desired location. Use the mounting holes on the base of the fixture to mark the drilling points. Refer to the diagram below for mounting dimensions.


Image: Detailed diagram of the spotlight's base with mounting hole dimensions (69mm x 69mm spacing, 4mm diameter holes, 13mm edge distance, max 12mm cable inlet).

3. Fè twou: Drill holes at the marked points. Insert the provided wall plugs into the drilled holes.
4. Konekte fil elektrik: Open the terminal cover on the fixture. Carefully connect the electrical wires from your ceiling to the terminal block inside the fixture. Ensure correct connections: Live (L), Neutral (N), and Earth (⌀). The cable inlet supports a maximum diameter of 12mm.
5. Monte aparèy la: Align the fixture's mounting holes with the wall plugs. Secure the fixture to the ceiling using the provided screws and washers. Do not overtighten.
6. Insert GU10 Bulbs: Insert two GU10 LED bulbs (not included) into the lamp holders. Ensure they are securely twisted into place. Do not exceed 35 Watts per bulb.
7. Retabli pouvwa: Once installation is complete and all connections are secure, restore the main power supply.

5. Operasyon Enstriksyon

The HOFTRONIC Esto spotlight is designed for simple operation.

• Limen/Etenyen: Control the spotlight using your standard wall light switch.
• Ajiste Direksyon Limyè: The GU10 fittings are tiltable, allowing you to adjust the light direction by up to 30 degrees. Gently pivot the inner lamp holders to direct the light as desired.

Image: Illustration of the adjustable light direction, demonstrating the 30-degree tilt capability of the GU10 fittings.

6. Antretyen

Regular maintenance will help prolong the life and appearance of your spotlight.

• Netwayaj: Ensure the power is off and the fixture is cool before cleaning. Wipe the exterior of the spotlight with a soft, dry, or slightly damp twal. Pa sèvi ak pwodui netwayaj abrazif, solvan, oswa pwodui chimik ki agresif, paske sa yo ka domaje fini an.
• Ranplasman anpoul:
  1. Fèmen ekipman pou pouvwa a nan aparèy la.
  2. Allow the bulb to cool completely if it has been recently in use.
  3. Gently push the GU10 bulb into its fitting and twist it counter-clockwise to remove.
  4. Insert a new GU10 LED bulb (max 35W) by pushing it into the fitting and twisting clockwise until secure.
  5. Retabli pouvwa.

NAN. Depanaj

If you encounter issues with your spotlight, refer to the following common problems and solutions:

• Limyè pa limen:
  • Check if the main power supply is on.
  • Asire w ke switch miray la nan pozisyon 'on'.
  • Verify that the GU10 bulbs are correctly inserted and not faulty.
  • Inspect wiring connections for looseness or damage (ensure power is off before inspection).
• Limyè tranble:
  • Ensure GU10 bulbs are fully seated in their sockets.
  • Try replacing the bulb to rule out a faulty bulb.
  • Check for loose wiring connections (with power off).
• Fixture feels hot:
  • Confirm that the installed GU10 bulbs do not exceed the maximum wattage nan 35W.
  • Ensure there is no obstruction preventing proper heat dissipation.

Si pwoblèm yo pèsiste, kontakte sèvis kliyan oswa yon elektrisyen kalifye.

8. Espesifikasyon

Image: Overall dimensions of the HOFTRONIC Esto 2-Light GU10 Black LED Spotlight.

9. Garanti

This HOFTRONIC product comes with a 3-ane garanti, reflecting our commitment to quality and durable construction. The robust aluminum enclosure ensures a long lifespan for your ceiling light.

Image: Warranty information, indicating a 3-year warranty and durable build quality.

10. Sipò

For further assistance, technical support, or warranty claims, please contact your retailer or the HOFTRONIC customer service department. Refer to your purchase documentation for contact details.