One Control Crocodile Tail Loop Wing (OC10W) User Manual

1. Pwodwi souview

The One Control Crocodile Tail Loop Wing (OC10W) is an advanced programmable 10-channel loop switcher designed to optimize your guitar effects setup. It integrates user feedback and technical advancements to provide flexible signal routing, comprehensive MIDI control, and convenient remote programming via Bluetooth.

Figi 1: Devan view of the One Control Crocodile Tail Loop Wing (OC10W), showing the display, footswitches, and input/output jacks.

2. Gid Enstalasyon

2.1. Koneksyon pouvwa

Connect a standard 9V DC power supply (not included) to the 9V DC input jack on the rear panel of the OC10W. Ensure the power supply meets the required specifications (9V, 150mA minimum).

2.2. Koneksyon odyo

1. Connect your guitar or instrument to the Antre Jack.
2. Konekte a SOTI 1 or SOTI 2 Jack pou ou ampopinyon moun ki ap viv la.
3. For each effect pedal, connect the pedal's input to a VOYE jack (e.g., SEND1) and the pedal's output to the corresponding TOUNEN jack (e.g., RETURN1). The OC10W features seven serial mono loops (SEND1-7/RETURN1-7) and three parallel loops (SEND8-10/RETURN8-10).
4. La Sentonizè output can be connected to a dedicated tuner pedal. This output features a mute switch for silent tuning.

Figi 2: Dèyè view of the OC10W, illustrating the various input, output, send, and return jacks for audio connections.

2.3. Koneksyon MIDI

Use standard MIDI cables to connect the MIDI IN epi MIDI SOTI jacks to other MIDI-compatible devices for comprehensive control and synchronization.

2.4. Bluetooth Pairing (Winglink App)

The OC10W can be controlled and programmed remotely via the Winglink iOS app. Ensure Bluetooth is enabled on your iOS device and follow the app's instructions to pair with the OC10W. Look for the Winglink logo on the device.

Figure 3: Close-up of the Winglink logo, indicating Bluetooth connectivity for the iOS app.

3. Operasyon

3.1. Mòd operasyon yo

The OC10W supports two primary modes of operation:

• Mòd pwogram: Allows you to store and recall complex effect pedal combinations and MIDI commands as presets. The OC10W offers 168 MIDI presets.
• Mòd manyèl: Enables direct control over individual loops via the footswitches, allowing you to turn effects on and off instantly without recalling a preset.

3.2. Footswitch Functions

The OC10W features multiple footswitches for versatile control:

• PROGRAM / LOOP Footswitches (1-7): In Program Mode, these recall specific presets. In Manual Mode, they activate/deactivate the corresponding effect loops.
• BANK+ / LOOP8 Footswitch: Used to increment banks in Program Mode or control Loop 8 in Manual Mode.
• MUTE / LOOP9 Footswitch: Mutes the output for silent tuning or controls Loop 9.
• FS3 / MULTI JACK Footswitch: Controls external devices via the FS3 jack or acts as a multi-function switch.
• FS1, FS2, SLV: Additional footswitches for various control functions, often configurable.

Figi 4: Close-up view of the OC10W's footswitch section, including the main program/loop switches and control switches.

3.3. Ekspozisyon ak Endikatè

The central display shows the current bank/index, program number, or custom name. LED indicators provide visual feedback on active loops, MIDI status, and other functions.

Figure 5: Close-up of the OC10W's digital display, showing a typical preset indication.

4. Antretyen

To ensure the longevity and optimal performance of your One Control Crocodile Tail Loop Wing, follow these maintenance guidelines:

• Netwayaj: Use a soft, dry cloth to wipe down the unit. Avoid abrasive cleaners, solvents, or excessive moisture, which can damage the finish and internal components.
• Depo: Sere aparèy la nan yon kote ki fre epi sèk, lwen limyè solèy dirèk, tanperati ekstrèm, ak imidite ki wo.
• Koneksyon: Periodically check all cable connections (audio, MIDI, power) to ensure they are secure and free from damage. Loose connections can lead to signal loss or intermittent operation.
• Pye switch: While designed for durability, avoid excessive force when operating the footswitches.

NAN. Depanaj

If you encounter issues with your OC10W, refer to the following common problems and solutions:

6. Espesifikasyon teknik

7. Garanti ak sipò

One Control products are manufactured to high standards. For warranty information, technical support, or service inquiries, please contact One Control customer service or visit their official websit la. Tanpri konsève prèv acha ou a pou reklamasyon garanti.

Manifakti: yon sèl kontwòl