Entwodiksyon
This manual provides detailed instructions for the installation, operation, and maintenance of your Barkan BM410T Tilt TV Wall Mount. This mount is designed to securely hold flat or curved screens ranging from 13 to 90 inches and weighing up to 132 lbs (60 kg). It features a tool-free tilt mechanism and a patented auto-locking safety mechanism for enhanced security.
Enfòmasyon sou Sekirite
Please read all instructions carefully before installation. Incorrect assembly or use can lead to product damage or personal injury. Keep this manual for future reference.
- Kapasite pwa: Pa depase kapasite pwa maksimòm lan ki se 132 liv (60 kg).
- Gwosè ekran: Ensure your TV screen size is within the recommended range of 13-90 inches.
- Kalite miray: Verify your wall type is suitable for installation. This mount is compatible with concrete blocks/concrete walls and drywall with wood studs (1 or 2 stud connection). It is pa suitable for drywall/gypsum/plaster without studs.
- Sekirite timoun: The mount includes a Fall Proof system to prevent screen disengagement, enhancing child safety by reducing tip-over risks.
- Materyèl: Use only the provided hardware. If your screen requires different screws, consult Barkan support or purchase appropriate screws from a local hardware store.
Enstalasyon ak Enstalasyon
The Barkan BM410T mount offers a self, easy, and fast assembly process. Follow these steps for proper installation:
- Attach Adapters to TV: Secure the TV rails (adapters) to the rear side of your television using the appropriate screws from the hardware kit. Ensure the VESA mounting holes on your TV match the mount's compatibility (from 75x75mm to 600x400mm).
- Enstale Mi Support: Mount the wall plate (bracket) securely to your chosen wall location. Refer to the "Wall Compatibility" section below to ensure your wall type is suitable. The mount offers 3 modular connection options for the wall plate, accommodating horizontal distances of up to 7.9 inches (200mm), between 7.9 and 15.7 inches (400mm), or between 15.7 and 23.6 inches (600mm).
- Snap TV onto Bracket: Carefully lift the TV with the attached adapters and snap it onto the installed wall bracket. The patented auto-locking mechanism will engage, preventing accidental disengagement.
Figure 1: The Barkan BM410T offers six possible configurations, including three tilt and three fixed options, depending on the wall rail and TV rail setup.
Figure 2: Wall compatibility guide. The mount is suitable for concrete walls and drywall with wood studs. Not recommended for drywall/gypsum/plaster without studs.
Figure 3: Included hardware kit with various screws and anchors for wall and TV mounting. Ensure correct hardware is used for your specific wall and TV type.
Figure 4: Various backscreen connection positioning options for TV rails to accommodate different VESA patterns. If your TV's pattern is not shown, contact support.
Enstriksyon Operasyon
Fonksyonalite enklinezon
The Barkan BM410T features a tool-free tilt mechanism, allowing you to adjust your TV's viewing angle easily. The mount provides a tilt range from 0° to 15°.
- To tilt the TV, gently push or pull the bottom edge of the screen to achieve the desired angle.
- The "Touch & Tilt" feature allows for smooth adjustment without the need for tools.
Figi 5: Egzample of a TV mounted with tilt functionality, allowing for angle adjustment.
Auto Locking Safety Mechanism
This mount incorporates a patented auto-locking mechanism to prevent the TV from accidentally disengaging from the wall bracket. Unlike screw-locking mechanisms, this system has no cords or springs that can break and features two hanging points on each side for increased security.
Figure 6: Diagram illustrating the patented auto-locking safety mechanism, showing how the TV securely engages with the wall bracket.
Antretyen
The Barkan BM410T TV wall mount requires minimal maintenance to ensure its longevity and safe operation.
- Enspeksyon regilye: Tcheke tout vis ak koneksyon yo detanzantan pou asire yo rete sere epi byen fèm.
- Netwayaj: Clean the mount with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these may damage the finish.
- Deplase televizyon an: If you need to move the TV, carefully disengage the auto-locking mechanism as per the assembly instructions in reverse, or consult the Barkan support websit pou konsèy.
Depanaj
If you encounter any issues during or after installation, refer to the following common problems and solutions:
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| TV does not feel secure on the mount. | Auto-locking mechanism not fully engaged or screws are loose. | Ensure the TV is properly seated and the auto-locking mechanism has clicked into place. Check all mounting screws for tightness. |
| Mounting screws do not fit the TV. | Incorrect screw size for your TV's VESA pattern. | Refer to your TV's manual for correct VESA screw sizes. Use the appropriate screws from the Barkan hardware kit or purchase compatible screws from a local hardware store. Contact Barkan support if unsure. |
| Mount appears crooked after installation. | Wall bracket not level during installation. | Carefully remove the TV, then adjust the wall bracket to ensure it is perfectly level before re-mounting the TV. |
Espesifikasyon
| Karakteristik | Detay |
|---|---|
| Nimewo Modèl | BM410T |
| Kalite aliye | Mi mòn |
| Kalite Mouvman | Panche |
| Materyèl | Metal |
| Koulè | Nwa |
| Aparèy konpatib | Televizyon |
| Minimum Supported Screen Size | 13 pous |
| Maximum Supported Screen Size | 90 pous |
| Kapasite chaj maksimòm | 132 liv (60 kg) |
| Distans soti nan miray la | 2.7 pous (6.8 cm) |
| Maksimòm Ang Panche | 15 Degre |
| VESA konpatibilite | From 75x75mm to 600x400mm |
| Konpozan ki enkli | TV Mount, Hardware Kit, Assembly Instructions |
Figure 7: Detailed dimensions and tilt range of the Barkan BM410T TV wall mount.
Figure 8: Summary table of key specifications for the Barkan BM410T Modular TV Wall Mount.
Enfòmasyon sou Garanti
The Barkan BM410T TV Wall Mount comes with a Garanti pou tout lavi limite. All Barkan products undergo strict quality tests and are tested with three times their declared weight capacity to ensure reliability.
For detailed warranty terms and conditions, please refer to the official Barkan websit oswa kontakte sipò kliyan.
Sipò pou Kliyan
For any questions, assistance with installation, or troubleshooting, please contact Barkan customer support.
- Sipò sou entènèt: Visit the official Barkan website for FAQs, video demonstrations, and additional helpful tools: barkanmounts.com/support
- Sipò Imèl: For inquiries, you may reach out to sales.usa@barkanmounts.
- Sèvis Kliyan: Barkan customer service experts are available to assist you.