BTF-LIGHTING RT9 & VP LED Strip Controller Kit User Manual

1. Entwodiksyon

This manual provides detailed instructions for the installation, operation, and maintenance of your BTF-LIGHTING RT9 & VP LED Strip Controller Kit. This kit is designed to provide versatile control over RGB and RGBW LED strips, offering features such as multi-zone control, color adjustment, and brightness dimming via a 2.4GHz RF wireless remote.

2. Enfòmasyon sou Sekirite

Asire vol D' atage (12V/24V DC) matches the requirements of both the controller and the LED strips. Incorrect voltage ka lakòz domaj.
Do not exceed the maximum output current or power ratings of the controller. Overloading can lead to overheating and failure.
Always disconnect power before making any wiring connections to prevent electrical shock.
Install the controller in a dry, well-ventilated area. Avoid exposure to moisture, high temperatures, or corrosive environments.
Pwodwi sa a fèt pou itilize andedan kay la sèlman.
Kenbe soti nan atenn timoun yo.

3. Pake kontni

Verifye ke tout atik ki nan lis anba a yo enkli nan pakè ou a:

Image showing the BTF-LIGHTING RT9 remote, VP controller, user manual, battery, and wall mount bracket.

This image displays the complete contents of the BTF-LIGHTING RT9 & VP LED Strip Controller Kit, including the remote control, VP receiver, instruction manual, two AAA batteries, and a wall-mounted remote holder.

1 x RT9 RF 2.4GHz Wireless Remote Control
1 x VP 4-Channel LED Controller (Receiver)
1 x Remote Wall Mount Bracket
2 pil AAA (pou kontwòl remote)
1 x Manyèl Itilizatè (dokiman sa a)

4. Espesifikasyon

Karakteristik	Spesifikasyon
Nimewo Modèl	JQGD RT9+VP
Antre Voltage	12/24V DC
Antre aktyèl (Max)	15.5A
Sòti Voltage	4 x (12/24)V DC
Sòti aktyèl	4 channels, 4A/channel, Max 6A total
Pouvwa Sòti (Max)	4 x (48/96)W
Kalite Sòti	Konstan Voltage
Siyal Antre	RF 2.4GHz
Kontwòl Distans	30m (barrier-free space)
Diminisyon Echèl Gri	4096 (2^12) nivo
Ranje gradyasyon	0-100%
PWM Frekans	750Hz (default)
Tanperati operasyon	-30 °C ~ +55 °C
Evalyasyon IP	IP20
Tanperati Ka a (Maksimòm)	Tc: +85°C
Itilizasyon Andedan kay la / Deyò	Andedan kay la

5. Enstalasyon

5.1. Dyagram fil elektrik

Follow the diagram below for correct electrical connections. Ensure all connections are secure before applying power.

Detailed wiring diagram for the BTF-LIGHTING LED controller, showing connections from power adapter to controller and then to RGB/RGBW LED strips.

This diagram illustrates the correct wiring connections for the VP 4CH LED Controller. It shows the AC 100-240V power adapter connecting to the controller's input, and the controller's output connecting to the RGB/RGBW LED strip lights. The remote controller is also shown for reference.

Connect your 12V or 24V DC power adapter to the input terminals of the VP controller. Ensure the positive (+) and negative (-) terminals are correctly matched.
Connect the LED strip to the output terminals of the VP controller. For RGBW strips, connect the Red (R), Green (G), Blue (B), and White (W) wires to their respective terminals, and the common positive (+) wire to the V+ terminal. For RGB strips, connect R, G, B, and V+.
Asire w tout koneksyon yo byen sere epi izole pou anpeche kous kout.

5.2. Kontwolè a finiview

Familiarize yourself with the controller's ports and indicators.

Fèmen view of the BTF-LIGHTING VP LED controller, highlighting input/output terminals and the match key.

Yon detaye view of the VP LED Controller, indicating the power input terminals (12-24VDC), DC socket input, match key, LED indicator, and the output terminals for Red, Green, Blue, and White LED channels, along with the common positive (+) output.

Antre pouvwa: Terminals for 12-24V DC power supply.
DC Socket Input: Alternative power input via a DC barrel jack.
Kle Match: Used for pairing the remote control.
Endikatè ki ap dirije: Shows the status of the controller (e.g., pairing mode, signal reception).
Tèminal Sòti: Labeled V+, R, G, B, W for connecting LED strips.

5.3. Koneksyon a distans

To pair the RT9 remote control with the VP controller:

Ensure the VP controller is powered on and connected to the LED strip.
Within 3 seconds of powering on the controller, press the 'Match' key on the VP controller once. The LED indicator on the controller will flash.
Immediately press any button on the RT9 remote control.
If pairing is successful, the LED strip will flash a few times, indicating a successful connection.
If pairing fails, repeat the steps. Ensure the remote is within range and its batteries are functional.

6. Operasyon Enstriksyon

6.1. Basic Remote Functions

The RT9 remote control allows for comprehensive management of your LED lighting. Insert the two AAA batteries into the remote before use.

Illustration of a user controlling multiple lighting zones in a house using the BTF-LIGHTING RF 2.4GHz wireless remote.

This image demonstrates the wireless transmission capability of the RT9 remote, allowing control of individual lighting zones (Zone 1 to Zone 4 and more) within a 30-meter distance in a barrier-free space. The remote can control multiple LED bulbs or strips in different areas of a home.

Bouton pouvwa: Turns the connected LED strips on or off.
Koulè rou: Touch the color wheel to select any desired color.
Ajisteman klète: Sèvi ak bouton monte/diminye klète yo pou ajiste entansite limyè a.
Mode Buttons (S1, S2): Cycle through pre-programmed dynamic lighting modes.
Zone Selection (1, 2, 3, 4): Select individual zones to control them independently. Press and hold a zone button to link/unlink a controller to that zone.
RGB/W Buttons: Chwazi koulè wouj, vèt, ble, oswa blan dirèkteman.

6.2. Zone Control

The RT9 remote supports up to 4 independent zones, allowing you to control different sets of LED strips separately or together.

Diagram showing multiple BTF-LIGHTING VP controllers linked wirelessly, extending the control range up to 30 meters between each unit.

This diagram illustrates how multiple VP controllers can be linked together to extend the wireless control range. Each controller can communicate with others within a 30-meter radius, allowing for a larger network of controlled LED strips.

To assign a controller to a zone: Power on the controller, then within 3 seconds, press the 'Match' key on the controller. Immediately press the desired zone number (1-4) on the remote. The LED strip will flash to confirm assignment.
To control a specific zone, press its corresponding number button on the remote.
To control all zones simultaneously, press the 'All' button (if available on your remote model, or cycle through zones).

6.3. Product Feature Videos

This video demonstrates the color-changing capabilities and brightness adjustment of the RGBW 5050SMD LED strip light when controlled by the BTF-LIGHTING system. It showcases the range from 1% to 100% brightness and millions of available colors.

This video provides a visual guide on how to use the RT9 remote control with the VP LED strip controller. It shows the remote's functions for changing colors (RGB and white), adjusting brightness, and selecting different lighting modes for 4-pin and 5-pin LED strips.

7. Antretyen

Netwayaj: Gently wipe the controller and remote with a dry, soft cloth. Do not use harsh chemicals or abrasive cleaners.
Ranplasman batri: Replace the remote control batteries (2x AAA) when the control range decreases or the remote becomes unresponsive.
Depo: If storing the kit for an extended period, remove batteries from the remote and store in a cool, dry place.

NAN. Depanaj

Pwoblèm	Kòz posib / Solisyon
Bann LED la pa limen.	Check power supply connection to the controller. Ensure the power supply provides the correct voltage (12V/24V) and sufficient amperage for your LED strip length. Verify LED strip is correctly wired to the controller outputs (V+, R, G, B, W). Tcheke pou nenpòt koneksyon ki lach oswa fil ki domaje.
Remote does not control the LED strip.	Ensure the remote is paired with the controller. Refer to the "Remote Pairing" section (5.3). Check the remote's battery level and replace if necessary. Ensure there are no significant obstructions between the remote and the controller. Confirm the remote is within the 30m control range.
Incorrect colors or flickering.	Verify wiring connections for RGB/RGBW channels are correct and secure. Ensure the LED strip type (RGB or RGBW) matches the controller's configuration. Check for a stable power supply; voltage fluctuations can cause flickering.
Limited control range.	Ensure the controller is not obstructed by large metal objects or other sources of RF interference. The maximum control distance is 30m in barrier-free space. Walls and other obstacles will reduce this range. Consider adding more controllers to extend the network range if needed.

9. Garanti ak sipò

BTF-LIGHTING products are manufactured to high standards and undergo rigorous testing. This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty details, please refer to the product packaging or contact your retailer.

If you encounter any issues or require technical assistance, please contact BTF-LIGHTING customer support through the retailer's platform or the official BTF-LIGHTING website. Please have your product model number (JQGD RT9+VP) and purchase information ready when contacting support.

BTF-LIGHTING JQGD RT9+VP