Corally COR54011 TOROX 185A Brushless - 2-6SS Speed Controller

Entwodiksyon

This manual provides essential information for the proper setup, operation, and maintenance of your Corally COR54011 TOROX 185A Brushless 2-6SS Speed Controller. Please read this manual thoroughly before using the product to ensure optimal performance and safety.

The Corally TOROX 185A ESC is designed for high-performance RC applications, offering robust power delivery and advanced programmability for various motor and battery configurations.

Pwodwi souview

Image: The Corally COR54011 TOROX 185A Brushless Speed Controller, showcasing its red housing, integrated cooling fan, and robust gold-plated motor and battery connectors. The unit features a Team Corally logo on the side.

The TOROX 185A ESC is a powerful electronic speed controller featuring a durable red casing, an integrated cooling fan for thermal management, and multiple connection points for motor and battery. It supports both sensored and sensorless brushless motors (in sensorless mode) and is designed for 1/8th scale RC vehicles.

Prekosyon Sekirite

• Always disconnect the battery from the ESC when not in use.
• Ensure proper polarity when connecting batteries to avoid damage.
• Opere nan yon zòn ki byen ayere pou evite surchof.
• Keep away from water unless specifically designed for waterproof operation (this model has water protection).
• Do not attempt to disassemble or modify the ESC.
• Use appropriate motor and battery combinations as specified to prevent overload.

Enstalasyon ak Enstalasyon

1. Enstalasyon ESC a

Securely mount the ESC in your vehicle using double-sided tape or screws, ensuring good airflow around the unit for effective cooling. Avoid mounting near heat sources or in enclosed spaces.

2. Koneksyon motè

Connect the three motor wires from your brushless motor to the corresponding gold-plated terminals (A, B, C) on the ESC. Ensure a secure connection. For sensored motors, connect the sensor wire to the sensor port on the ESC and motor.

3. Koneksyon batri

Connect your battery pack to the XT90 connector on the ESC. This ESC supports 2-6S LiPo or 9-18 Cell NiMH batteries. Always double-check polarity before connecting.

4. Koneksyon reseptè

Plug the ESC's receiver cable into the throttle channel (usually Channel 2) of your RC receiver. The BEC (Battery Eliminator Circuit) provides power to the receiver and servos.

5. Kalibrasyon

Before first use, calibrate the ESC with your radio transmitter. Refer to your transmitter's manual for specific calibration steps. Generally, this involves turning on the transmitter, holding full throttle, turning on the ESC, waiting for beeps, moving to full brake, waiting for beeps, and then returning to neutral.

Enstriksyon Operasyon

Limen / Off

• To power on: Ensure the transmitter is on, then connect the battery to the ESC.
• To power off: Disconnect the battery from the ESC.

Pwogramasyon ESC la

The TOROX 185A ESC is programmable. An optional Hobbywing LED programming card can be used for easier parameter adjustment. Key programmable parameters include:

• Mòd gaz: Forward/Reverse (with programmable reverse lockout)
• Trennen fren: 0-16% adjustment
• mòd batri: NiMH/LiPo selection
• LiPo Cut-off Voltage: Programmable to protect LiPo batteries from over-discharge.
• Tanperati pwoteksyon tèmik: Mete nan 105 °C oswa 125 °C.
• BEC Voltage: 6V oswa 7.4V.

Refer to the specific programming card manual for detailed instructions on how to change these settings.

Antretyen

• Netwayaj: Regularly clean the ESC and cooling fan to remove dirt and debris. Use a soft brush or compressed air.
• Enspeksyon: Periodically inspect all wires and connectors for signs of wear, damage, or loose connections.
• Depo: Sere ESC a nan yon kote ki sèk epi fre, lwen limyè solèy dirèk ak tanperati ekstrèm.
• Pwoteksyon dlo: While this ESC features water protection, it is not designed for prolonged submersion. Always dry the unit thoroughly after exposure to moisture.

Depanaj

Espesifikasyon

Garanti ak sipò

For warranty information and technical support, please contact Corally customer service or visit their official websit la. Kenbe prèv acha ou pou reklamasyon garanti.

Remak: Kondisyon garanti espesifik yo ka varye selon rejyon an ak détayan an.