Superfish 264765
Superfish Eco Heater 50W Aquarium Heater
Modèl: 264765
Entwodiksyon
Thank you for choosing the Superfish Eco Heater 50W. This instruction manual provides important information for the safe and efficient use of your new aquarium heater. Please read it thoroughly before installation and operation, and keep it for future reference.
This 50W heater is designed to maintain a stable water temperature in aquariums up to 30 liters, ensuring a healthy environment for your aquatic life.
Enstriksyon Sekirite Enpòtan
- Li tout enstriksyon yo anvan w sèvi ak aparèy sa a.
- DANJE - To avoid possible electric shock, special care should be taken since water is used in the use of aquarium equipment. For each of the following situations, do not attempt repairs yourself; return the appliance to an authorized service facility for service or discard the appliance.
- Si aparèy la tonbe nan dlo a, PA FÈ reach for it. First unplug it and then retrieve it. If electrical components get wet, unplug the appliance immediately.
- Ak anpil atansyon egzamine aparèy la apre enstalasyon an. Li pa ta dwe ploge nan si gen dlo sou pati ki pa gen entansyon mouye.
- Pa opere nenpòt aparèy si li gen yon kòd oswa ploge ki domaje, oswa si li pa fonksyone byen oswa si li te tonbe oswa domaje nan nenpòt fason.
- To avoid the possibility of the appliance plug or receptacle getting wet, position aquarium stand and tank to one side of a wall-mounted receptacle to prevent water from dripping onto the receptacle or plug. A "drip loop" should be arranged by the user for each cord connecting an aquarium appliance to a receptacle. The "drip loop" is that part of the cord below the level of the receptacle, or the connector if an extension cord is used, to prevent water traveling along the cord and coming into contact with the receptacle. If the plug or receptacle does get wet, PA FÈ deploge kòd la. Dekonekte fuzib oswa disjoncteur ki bay aparèy la kouran. Lè sa a, deploge epi egzamine pou prezans dlo nan resipyan an.
- Sipèvizyon sere se nesesè lè nenpòt aparèy itilize pa oswa toupre timoun yo.
- Pou evite blese, pa kontakte pati k ap deplase oswa pati cho tankou aparèy chofaj, reflektè, lamp anpoul, ak renmen an.
- Toujou debranche yon aparèy nan yon priz lè li pa itilize, anvan ou mete oswa retire pati, epi anvan netwaye. Pa janm tire kòd pou rale ploge nan priz. Atrab ploge a epi rale pou dekonekte.
- Pa sèvi ak aparèy la pou lòt itilizasyon ki gen entansyon. Sèvi ak atachman pa rekòmande oswa vann pa manifakti aparèy la ka lakòz yon kondisyon danjere.
- Pa enstale oswa estoke aparèy la kote li pral ekspoze a move tan oswa nan tanperati ki pi ba pase lè w konjele.
- Ensure the heater is fully submerged in water before connecting to power.
- Chofaj sa a fèt pou itilize andedan kay la sèlman.
Pwodwi souview
The Superfish Eco Heater 50W is a compact and efficient submersible heater designed for small aquariums. It features a precise temperature adjustment mechanism and a long power cable for flexible placement.

Figure 1: Superfish Eco Heater 50W. This image displays the main heater unit, highlighting its design and key specifications like wattage and IP rating.

Figure 2: Superfish Eco Heater 50W Packaging. The packaging highlights the heater's features, including its wattage, suitable aquarium size, and warranty period.
Enstalasyon ak Enstalasyon
- Dekonpoze: Carefully remove the heater from its packaging. Inspect for any signs of damage.
- Plasman: Position the heater vertically in your aquarium, ensuring it is fully submerged in water. Avoid placing it directly in the substrate or against the glass where it might be obstructed. Ensure good water circulation around the heater.
- Montaj: Use the provided suction cups to securely attach the heater to the inside wall of your aquarium.
- Submersion: The heater must be completely submerged in water at all times during operation. The IP68 rating confirms its suitability for continuous immersion.
- Koneksyon pouvwa: Once the heater is securely placed and fully submerged, connect the power plug to a suitable electrical outlet. Ensure a drip loop is formed with the power cord to prevent water from running down to the outlet.
- Premye chofe: Allow the heater approximately 15-30 minutes to stabilize the water temperature after initial setup.
Enstriksyon Operasyon
The Superfish Eco Heater 50W is designed for simple operation. It features an adjustable thermostat to set your desired water temperature.
- Ajisteman Tanperati: The heater has a temperature adjustment knob (typically blue, as seen in Figure 1) at the top. Rotate this knob to set the desired temperature. Refer to the markings on the heater for temperature guidance.
- Siveyans: Use a separate, accurate aquarium thermometer to monitor the water temperature. Adjust the heater's setting as needed until the desired temperature is consistently maintained.
- Limyè Endikatè: The heater may feature an indicator light (not explicitly mentioned but common) that illuminates when the heating element is active.
- Tanperati ki estab: Once set, the heater will automatically turn on and off to maintain the chosen temperature.
Antretyen
Antretyen regilye asire lonjevite ak fonksyònman efikas aparèy chofaj ou a.
- Dekonekte pouvwa: Always unplug the heater from the power outlet before performing any maintenance or cleaning.
- Cool Down: Allow the heater to cool down completely in the water before removing it from the aquarium. Removing a hot heater from water can cause thermal shock and damage.
- Netwayaj: Gently wipe the heater's surface with a soft cloth to remove algae or mineral deposits. Do not use abrasive cleaners or harsh chemicals. If stubborn deposits occur, a soft brush or a mild aquarium-safe cleaning solution can be used.
- Enspeksyon: Periodically inspect the power cord for any signs of damage, fraying, or kinks. Check the heater body for cracks or other physical damage. If any damage is found, discontinue use immediately and replace the heater.
- Chanjman dlo: During water changes, ensure the water level does not drop below the minimum submersion line of the heater. If it does, unplug the heater until the water level is restored.
Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Heater not turning on / No heat |
|
|
| Water temperature too high/low |
|
|
| Heater indicator light not working |
|
|
If you experience issues not covered here, or if troubleshooting steps do not resolve the problem, please contact Superfish customer support.
Espesifikasyon
| Nimewo Modèl | 264765 |
| Pouvwa | 50 W |
| Voltage | 220-240V / 50-60Hz |
| Volim akwaryòm | 0-30 lit |
| Dimansyon (L x W x H) | 5 x 23 x 8 cm |
| Pwa | 220 gram |
| Rezistans dlo | IP68 (Fully Submersible) |
| Koulè | Nwa |
| Karakteristik espesyal | Lightweight, Portable, Precise Temperature Adjustment |
Garanti
The Superfish Eco Heater 50W comes with a 2-ane garanti from the date of purchase. This warranty covers manufacturing defects under normal use. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by improper installation, misuse, neglect, or unauthorized modifications.
For warranty service, please contact your retailer or Superfish customer support.
Sipò pou Kliyan
If you have any questions, require technical assistance, or need to report a problem with your Superfish Eco Heater 50W, please contact Superfish customer support or your local retailer. Please have your model number (264765) and proof of purchase ready when contacting support.
For the most up-to-date contact information, please visit the official Superfish websit.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.