Entwodiksyon
This manual provides instructions for the Transformers Studio Series 70 Deluxe Class Bumblebee B-127 action figure. This collectible figure is inspired by iconic movie scenes and features a detailed design. It converts between robot mode and Cybertronian vehicle mode in 20 steps. The figure includes a blaster accessory and a removable backdrop for display.
Enfòmasyon sou Sekirite
AVÈTISMAN: DANJE TOUFE – Ti pyès ka pwodui. Pa pou timoun ki poko gen 3 an.
This product is recommended for ages 8 years and up. Adult supervision is advised during initial transformation to ensure proper handling and prevent damage to the figure.
Ki sa ki nan bwat la
- Bumblebee B-127 Action Figure
- Blaster Accessory
- Removable Backdrop
Enstalasyon ak Ekspozisyon
Upon unboxing, carefully remove the figure and its accessories from the packaging. The figure comes with a removable backdrop that can be used to enhance display. Position the figure in front of the backdrop to recreate the Cybertron Falls scene.

Image: Bumblebee B-127 figure in robot mode displayed with its Cybertron Falls scene backdrop.
Operating: Transformation Instructions
The Bumblebee B-127 figure converts between robot mode and Cybertronian vehicle mode in 20 steps. Follow these general guidelines for transformation:
- Abitye tèt ou: Before attempting transformation, observe the figure in both robot and vehicle modes. Identify key joints and panels.
- Manyen dou: Apply gentle, even pressure when moving parts. Avoid forcing any components, as this can cause damage.
- Step-by-Step Process: The transformation involves a sequence of 20 steps. Refer to the visual cues on the figure and the general transformation logic of similar figures. Typically, this involves folding panels, rotating limbs, and aligning sections to form the alternate mode.
- Entegrasyon akseswa: The blaster accessory can be attached to the figure in robot mode.

Image: Bumblebee B-127 in Robot Mode.

Image: Bumblebee B-127 in Cybertronian Vehicle Mode.

Image: Blaster Accessory Detail.
Antretyen
- Netwayaj: Use a soft, dry cloth to gently wipe dust from the figure. Avoid using harsh chemicals or abrasive materials, as these can damage the paint or plastic.
- Depo: Store the figure in a cool, dry place away from direct sunlight and extreme temperatures to prevent discoloration or material degradation.
- Swen jwenti: If joints become stiff, do not force them. A small amount of silicone shock oil (not petroleum-based lubricants) can be applied to the joint pin, but this should be done with caution and sparingly.
Depanaj
- Difficulty Transforming: If you encounter difficulty during transformation, review the steps carefully. Ensure all panels are aligned and tabs are correctly inserted into slots. Do not apply excessive force. Sometimes, visualizing the final form helps in understanding the sequence.
- Pati ki lach: If any parts feel loose, gently check for proper connection points. Some figures may have minor variations in joint tightness.
- Akseswa pou atache: Ensure the blaster accessory is correctly oriented and firmly inserted into the designated port on the figure's arm.
Espesifikasyon
| Karakteristik | Detay |
|---|---|
| Dimansyon pwodwi | 2.52 x 5.98 x 9.13 pous |
| Pwa atik | 2.82 ons |
| Nimewo Modèl Atik | F0784 |
| Manifakti laj rekòmande | 8 ane ak plis |
| Dat lage | 28 me 2021 |
| Manifakti | Hasbro |

Imaj: Dimansyon pwodwi a.
Garanti ak sipò
For information regarding product warranty or customer support, please refer to the official Hasbro websit la oubyen kontakte depatman sèvis kliyan yo. Kenbe resi acha w la kòm prèv acha.