BONTEC TV Wall Mount Bracket User Manual

Entwodiksyon

This user manual provides comprehensive instructions for the installation, operation, and maintenance of your BONTEC TV Wall Mount Bracket. Designed for 17-45 inch LED, OLED, LCD Flat Screen TVs up to 66lbs, this low-profile, ultra-slim mount offers a secure and aesthetically pleasing solution for mounting your television. Please read this manual thoroughly before installation to ensure safe and correct usage.

Enfòmasyon sou Sekirite

• Asire w ke estrikti miray la ka sipòte pwa ansanm ak televizyon an.
• Do not mount on drywall alone. Always mount into wood studs, concrete, or brick walls.
• Verify your TV's VESA pattern and weight are within the mount's specifications (Max VESA 200x200mm, Max 66lbs).
• Use all provided hardware. If any parts are missing or damaged, contact BONTEC customer support.
• Toujou sèvi ak yon detektè poto an bwa pou lokalize poto an bwa yo avèk presizyon.
• During installation, ensure no electrical wires or plumbing are behind the drilling area.
• Li rekòmande pou gen de moun pou enstalasyon an pou asire sekirite ak fasilite manyen.
• After installation, double-check all connections and ensure the TV is securely fastened to the mount.

Kontni pake

Tanpri verifye ke tout konpozan yo prezan anvan ou kòmanse enstalasyon an:

• Sipò pou monte televizyon sou miray (ankadreman prensipal)
• TV Mounting Brackets (x2)
• Assorted Screws and Washers for TV attachment
• Lag Bolts and Wall Anchors for wall attachment
• Nivo Lespri Bondye
• Kab lyen (x3)
• Manyèl enstalasyon

Image: All components of the BONTEC TV Wall Mount Bracket, including the main frame, TV brackets, and installation hardware.

Espesifikasyon

Image: Diagram illustrating the VESA compatibility (50-200mm) and screen size range (17-45 inches) for the mount.

Enstalasyon ak Enstalasyon

Follow these steps carefully to install your BONTEC TV Wall Mount Bracket. It is highly recommended to have two people for this process.

Etap 1: Tache parantèz televizyon sou televizyon

1. Mete televizyon an fas anba ak anpil atansyon sou yon sifas mou epi pwòp pou evite li reyur.
2. Idantifye twou VESA aliye yo sou do a nan televizyon ou.
3. Select the appropriate screws and washers from the provided hardware kit that fit your TV's mounting holes.
4. Attach the two vertical TV mounting brackets to the back of your TV. Ensure the hooks on the brackets are facing inward, towards the center of the TV.
5. Tighten the screws securely, but do not overtighten.

Image: A television mounted flat against a wall, demonstrating the ultra-slim 1.18-inch profile nan mòn lan.

Step 2: Mark and Drill Holes on Wall

1. Detèmine wotè ou vle pou televizyon ou an.
2. Place the wall plate against the wall at the desired height and use the included spirit level to ensure it is perfectly horizontal.
3. Mark the drilling points through the holes on the wall plate using a pencil.
4. Pou poto an bwa: Use a stud finder to locate the center of the wood studs. Drill pilot holes (recommended size: 7/32" or 5.5mm) at the marked locations.
5. Pou miray beton/brik: Drill pilot holes (recommended size: 3/8" or 10mm) at the marked locations. Insert the plastic wall anchors into the drilled holes. Tap gently with a hammer if needed until flush with the wall surface.

Image: Visual guide demonstrating the applicability of the mount to wood studs, concrete walls, and brick walls. A warning states: "DO NOT MOUNT ON DRYWALL ALONE".

Etap 3: Monte plak miray la sou miray la

1. Align the wall plate with the drilled holes.
2. Secure the wall plate to the wall using the lag bolts and washers. For concrete/brick walls, ensure the lag bolts go into the previously inserted wall anchors.
3. Tighten all bolts firmly to ensure the wall plate is securely fastened to the wall.

Etap 4: Pandye televizyon an sou yon plak miray

1. Avèk asistans, leve televizyon an avèk anpil atansyon avèk sipò yo ki tache ak li.
2. Align the hooks on the TV brackets with the top edge of the wall plate.
3. Gently lower the TV, ensuring the brackets engage securely with the wall plate.
4. Once the TV is hanging, locate the safety lock bolts at the bottom of the TV brackets. Tighten these bolts to secure the TV to the wall plate and prevent accidental dislodging.

Image: A visual representation of the easy 15-minute installation process, showing the TV being mounted onto the wall plate.

Imaj: Yon gwo plan view of the safety lock bolts, which secure the TV brackets to the wall plate after the TV is hung.

Gid videyo enstalasyon

Operating the Mount (Tilt Feature)

The BONTEC TV Wall Mount features a 10-degree forward tilt to optimize your vieweksperyans ing epi diminye ekla.

1. To adjust the tilt, loosen the tilt adjustment bolts on the side of the TV mounting brackets.
2. Carefully tilt the TV to your desired angle (up to 10 degrees forward).
3. Once the desired angle is achieved, tighten the tilt adjustment bolts securely to lock the TV in place.

Image: A diagram illustrating the 10-degree tilt capability of the mount and the space provided for cable management behind the TV.

Image: A family enjoying television, demonstrating how the BONTEC TV wall mount allows for optimal viewing angles in a living room setting.

Antretyen

To ensure the longevity and safe operation of your BONTEC TV Wall Mount Bracket:

• Tcheke tout vis ak boulon yo detanzantan pou asire yo rete sere epi byen fèm.
• Netwaye montur la avèk yon twal mou epi sèk. Evite itilize pwodui netwayaj abrazif oswa solvan.
• Do not hang anything from the mount other than the specified television.

Depanaj

Garanti ak sipò

For warranty information and customer support, please refer to the product packaging or visit the official BONTEC websit. Kenbe resi acha ou pou reklamasyon garanti.

If you encounter any issues not covered in this manual, please contact BONTEC customer service for assistance.