Entwodiksyon
Thank you for choosing the Philips LED Lamp with Sensor. This energy-efficient LED lamp provides warm white light (2700K) and features integrated motion and daylight sensors for automatic operation. Designed for convenience and energy saving, this lamp is suitable for various indoor applications. Please read this manual carefully before installation and use to ensure proper function and safety.
Image: The Philips LED Lamp ak Capteur, montreasing its standard bulb shape and integrated sensor at the top.
Enfòmasyon sou Sekirite
Always follow basic safety precautions when installing or using electrical products to reduce the risk of fire, electric shock, and personal injury.
- Pouvwa Off: Always switch off the power supply at the main circuit breaker before installing or replacing the lamp.
- Itilize andedan kay la sèlman: Sa a lamp is designed for indoor use. Do not expose it to water or excessive moisture.
- Baz ki kòrèk la: Asire lamp holder is compatible with an E27 base.
- Voltage: Verify that your electrical system's voltage (100-240V, 50Hz) matches the lampegzijans yo.
- Ki pa dimmable: Sa a lamp is not dimmable. Do not use it with dimmer switches.
- Konfò je: While designed for EyeComfort, avoid prolonged direct eye exposure to the light source.
Kontni pake
Pake a gen ladann:
- 1 x Philips LED Lamp with Sensor (Model 929002058731)
Enstriksyon Enstalasyon
- Etenn pouvwa: Before installation, ensure the power to the light fixture is completely turned off at the main circuit breaker.
- Retire Ansyen L laamp: Carefully unscrew and remove the existing lamp from the E27 lamp detantè.
- Enstale Nouvo Lamp: Screw the Philips LED Lamp with Sensor into the E27 lamp holder until it is finger-tight. Do not overtighten.
- Pozisyon: For optimal sensor performance, ensure the sensor at the top of the lamp is not obstructed by the fixture or other objects. The sensor requires a clear line of sight for motion detection and ambient light measurement.
- Retabli pouvwa: Turn the power back on at the main circuit breaker. The lamp will perform a brief self-test and then be ready for operation.
Image: The Philips LED Lamp with Sensor, illustrating its dimensions (12.2 cm height, 6.25 cm width) for proper fitting.
Enstriksyon Operasyon
This Philips LED lamp is equipped with both a motion sensor and a daylight sensor for automatic control.
- Otomatik On/Off: L laamp will automatically turn on when motion is detected in low light conditions (evening/night). It will turn off after a period of no motion or when sufficient ambient light is present (daytime).
- Sensor lajounen: The integrated daylight sensor detects ambient light levels. The lamp will only activate due to motion when the surrounding light is below a certain threshold (e.g., in the evening or a dark room). It will remain off during daylight hours to save energy.
- Capteur Mouvman: The motion sensor detects movement within its detection range. Once motion is detected in low light, the lamp illuminates. If no further motion is detected, the lamp will turn off after approximately 60 seconds.
- Kalite limyè: Enjoy a comfortable, warm white light at 2700 Kelvin, designed to meet Philips EyeComfort requirements for reduced eye strain.
Image: Product packaging highlighting the motion and daylight sensor features, indicating automatic on/off functionality.
Sensor Functionality Demonstration
Video: This video demonstrates the functionality of an automatic light sensor system, showing how a light turns on in low ambient light conditions and off when it's bright. This illustrates the principle behind the Philips LED Lamp's integrated sensors.
Antretyen
The Philips LED Lamp with Sensor requires minimal maintenance.
- Netwayaj: Asire w ke kouran an koupe anvan ou netwaye. Siye lamp with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the lamp's surface or sensor.
- Zòn Capteur: Keep the sensor area at the top of the lamp clean and free from dust or obstructions to ensure optimal performance.
Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Lamp pa limen. |
|
|
| Lamp pa etenn. |
|
|
| Sensor sensitivity seems low. |
|
|
Espesifikasyon
| Karakteristik | Detay |
|---|---|
| Mak | Philips |
| Nimewo Modèl | 929002058731 |
| Kalite limyè | dirije |
| Wattage | 8 Watt |
| Enkandesan ekivalan | 60 Watt |
| Lamp Baz | E27 |
| Koulè limyè | Blan cho |
| Tanperati Koulè | 2700 Kelvin |
| Flux lumineux | 806 Lumen |
| Voltage | 100-240 vòlt |
| Frekans | 50 Hertz |
| Karakteristik espesyal | Motion Sensor, Daylight Sensor, Non-Dimmable, EyeComfort |
| Andedan kay la / Deyò Itilizasyon | Andedan kay la |
| Viv lavi | 15,000 èdtan |
| Dimansyon (H x W) | 12.2 cm x 6.25 cm |
| Materyèl | Plastik |
Garanti ak sipò
This Philips LED Lamp with Sensor comes with a standard manufacturer's warranty. For detailed warranty information, please refer to the documentation provided with your purchase or visit the official Philips lighting website. If you encounter any issues or require technical assistance, please contact Philips customer support.
Sipò sou entènèt: Vizite www.philips.com/support pou kesyon yo poze souvan (FAQ) ak opsyon pou kontakte nou.