SHARKOON Elite Shark CA300T Extended ATX PC Case User Manual

1. Entwodiksyon

This manual provides comprehensive instructions for the SHARKOON Elite Shark CA300T Extended ATX PC Case. It covers the product's features, setup procedures, operational guidelines, maintenance tips, troubleshooting solutions, and detailed technical specifications. Please read this manual thoroughly before installation and use to ensure optimal performance and longevity of your PC case.

2. Karakteristik kle

• Konsepsyon futuris: The CA300T features an expressive front panel with a geometric pattern, framed by brushed aluminum, giving it a distinctive and modern aesthetic.
• Advanced Airflow: Equipped with three pre-installed 120mm RGB LED fans at the front and one at the rear, ensuring consistent airflow. The front panel includes a mesh grille for optimal ventilation, and the top panel offers a perforated cover for additional fan/radiator mounting.
• Illuminated I/O Panel: The side-mounted I/O panel includes standard audio ports, USB 3.0 ports, and a USB-C port, all featuring their own RGB illumination.
• Panno an vè apeze: Two tempered glass side panels provide a clear view of internal components. The right-side panel is partially tinted to conceal the power supply tunnel while highlighting SSDs or HDDs.
• Enteryè Spacious: Designed to accommodate large components, including graphics cards up to 42.5 cm, power supplies up to 24 cm, and CPU coolers up to 16.5 cm.
• Jesyon kab efikas: Features a spacious, foldable cable compartment and a sliding cable cover to keep wiring organized and out of sight.
• Opsyon Depo: Supports up to seven 2.5-inch drives or four 3.5-inch drives.

3. Pake kontni

The SHARKOON Elite Shark CA300T PC Case package typically includes:

• SHARKOON Elite Shark CA300T PC Case (White)
• Pre-installed 120mm RGB LED Fans (3x Front, 1x Rear)
• Accessory Box (screws, cable ties, standoffs, etc.)
• Manyèl Itilizatè (dokiman sa a)

Note: Specific contents may vary slightly. Please check the packaging for a complete list.

4. Enstriksyon Enstalasyon

Follow these steps to set up your SHARKOON Elite Shark CA300T PC case and install your components.

4.1. Prepare Ka a

1. Depake bwat la: Retire bwat òdinatè a nan anbalaj li avèk prekosyon.
2. Retire Panno Side: Unscrew the thumbscrews on the rear of the case for both tempered glass side panels. Gently slide and lift the panels to remove them. Place them on a soft, flat surface to prevent scratches.
3. Bwat akseswar: Jwenn bwat akseswa a anndan bwat la, ki gen tout vis ak pyès montaj nesesè yo.

4.2. Enstalasyon mèr

1. Enstale Standoffs: Ensure the correct standoffs are installed for your motherboard form factor (ATX, SSI EEB). The case typically has pre-installed standoffs for standard ATX.
2. Enstale Pwoteksyon E/S la: If your motherboard requires an external I/O shield, install it into the rear opening of the case before mounting the motherboard.
3. Monte Kat Mèb: Carefully place your motherboard onto the standoffs, aligning the screw holes. Secure the motherboard with the provided screws.

4.3. Enstalasyon Inite Alimantasyon (PSU)

1. Pozisyon PSU: The PSU mounts at the rear bottom of the case. Slide your PSU into the designated compartment from the rear.
2. Alimantasyon elektrik an sekirite: Align the PSU with the screw holes and secure it with the provided screws from the rear of the case.
3. Jesyon kab: Route PSU cables through the cutouts to the back of the motherboard tray for organized cable management.

4.4. Enstalasyon Disk Depo

The CA300T supports various drive configurations:

• 2.5-inch Drives (SSDs): Mount SSDs to the dedicated brackets behind the motherboard tray or within the PSU shroud.
• 3.5-inch Drives (HDDs): Install HDDs into the drive cages located under the PSU shroud.

4.5. Enstalasyon Kat Grafik ak Kat Ekspansyon

1. Retire kouvèti fant yo: Retire kouvèti fant ekspansyon ki nesesè yo nan dèyè bwat la.
2. Install Card: Insert your graphics card or other expansion cards into the appropriate PCIe slots on the motherboard.
3. Kat Sekirite: Secure the card with the provided screws.

4.6. Connecting Front Panel Cables

Connect the front panel cables (USB 3.0, USB-C, HD Audio, Power Switch, Reset Switch, Power LED, HDD LED) to their corresponding headers on your motherboard. Refer to your motherboard manual for exact pin layouts.

4.7. Final Asanble

1. Jesyon kab: Use the cable ties and routing channels to organize all internal cables behind the motherboard tray.
2. Retache Panno Side: Carefully reattach both tempered glass side panels and secure them with the thumbscrews.

Figi 1: Enteryè view of the CA300T, highlighting component space.

5. Operasyon Enstriksyon

5.1. Alimente sou sistèm ou a

After all components are installed and cables are connected, plug your power supply into a wall outlet and flip the PSU's power switch to the 'ON' position. Press the power button on the case's front I/O panel to start your computer.

5.2. Kontwòl ekleraj RGB

The pre-installed RGB fans and illuminated I/O panel can be controlled via your motherboard's RGB software (if compatible) or a dedicated RGB controller if included with your motherboard or purchased separately. Refer to your motherboard manual for specific RGB header locations and software instructions.

Figure 2: The CA300T with its illuminated RGB fans and distinctive front panel.

6. Antretyen

Regular maintenance helps ensure optimal performance and extends the lifespan of your PC components.

6.1. Netwayaj Filtè Pousyè

The CA300T includes magnetic dust filters. It is recommended to clean these filters every 1-3 months, depending on your environment, to maintain optimal airflow and prevent dust buildup inside the case.

1. Locate Filters: Identify the dust filters on the top, front, and bottom of the case.
2. Retire filtè yo: Gently pull or slide out the magnetic dust filters.
3. Netwaye Filtè: Use a soft brush, vacuum cleaner, or rinse with water (ensure completely dry before reinstallation) to remove accumulated dust.
4. Re-enstale filtè yo: Place the clean filters back into their respective positions.

6.2. Netwayaj jeneral

Pou sifas ekstèn yo, sèvi ak yon pwodui mou.amp cloth to wipe down the case. Avoid abrasive cleaners or solvents that could damage the finish or tempered glass.

Figi 3: Top view of the CA300T, showing the perforated top panel.

NAN. Depanaj

Seksyon sa a adrese pwoblèm komen ou ka rankontre pandan enstalasyon oswa operasyon.

7.1. Sistèm nan pa limen

• Check PSU: Ensure the power supply unit is properly connected to the wall outlet and the PSU's power switch is in the 'ON' position.
• Koneksyon panèl devan: Verify that the power switch cable from the case's front panel is correctly connected to the motherboard's power header.
• Internal Power Cables: Confirm that all necessary power cables (24-pin ATX, CPU 8-pin, GPU PCIe) are securely connected to the motherboard and components.

7.2. Fans Not Spinning / RGB Not Lighting Up

• Koneksyon Vantilatè: Ensure all fan power cables are securely connected to the motherboard's fan headers or a fan controller.
• RGB Connections: Verify that RGB cables are correctly connected to the motherboard's RGB headers or a dedicated RGB controller.
• Software/Controller: Check your motherboard's BIOS/UEFI settings or RGB software to ensure fans and RGB lighting are enabled and configured correctly.

7.3. USB Ports Not Functioning

• Internal USB Headers: Confirm that the internal USB 3.0 and USB-C cables from the case's front panel are securely connected to the corresponding headers on your motherboard.
• Motherboard Drivers: Ensure all necessary motherboard chipset and USB drivers are installed.

8. Espesifikasyon teknik

9. Garanti ak sipò

9.1. Garanti pwodwi

The SHARKOON Elite Shark CA300T PC Case comes with a 2-ane garanti on spare parts. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.

9.2. Mizajou lojisyèl

Software updates, if applicable for any integrated components or controllers, are guaranteed until 13 avril 2030.

9.3. Sipò pou Kliyan

For technical assistance, warranty claims, or further inquiries, please contact Sharkoon customer support through their official website or the retailer where the product was purchased. Have your product model and proof of purchase ready when contacting support.