GOOLOO GP80 800A Peak Car Jump Starter User Manual

1. Entwodiksyon

The GOOLOO GP80 is a lightweight and compact lithium car jump starter designed for 12-volt vehicle batteries. It provides a safe and efficient way to jump start a dead battery in seconds. This device also functions as a portable power bank for various USB devices and includes a built-in LED flashlight for emergencies.

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your GOOLOO GP80 jump starter. Please read it thoroughly before use.

2. Pake kontni

Lè w ap debale, tanpri asire w ke tout atik ki nan lis anba a yo la epi yo an bon kondisyon:

• GOOLOO Jump Starter GP80 Unit
• Smart Jumper Kab
• Quick Charge Micro USB Cable
• Twous sak
• Manyèl Itilizatè (dokiman sa a)

Image: All items included in the GOOLOO GP80 package, including the jump starter, smart jumper cables, USB cable, kit bag, and user manual.

3. Pwodwi souview ak Karakteristik

The GOOLOO GP80 is a versatile device designed for automotive emergencies and portable power needs.

3.1 Karakteristik kle

• Powerful Jump Starter: Capable of restarting vehicles with up to 4.5L gas engines using an 800A peak current. Suitable for cars, motorcycles, RVs, tractors, light-duty trucks, ATVs, and more.
• Portable Power Bank: Equipped with two USB outputs (5V 2.4A/9V 2A), including a Quick Charge 3.0 port for rapid charging of smartphones, tablets, and other mobile devices.
• Emergency LED Work Light: Features a built-in LED flashlight with three modes: High, Strobe, and SOS, useful for roadside emergencies or outdoor activities.
• Pwoteksyon Sekirite Avanse: Integrated smart jumper clamps provide protection against over current, short circuit, overload, over-voltage, over-charge, reverse polarity, reverse connection, and over-discharge.

Image: The GOOLOO GP80 jump starter shown with icons representing its capability to start gas engines up to 4.5L, motorcycles, and yachts.

3.2 Eleman pwodwi

Familiarize yourself with the different parts of your GP80 unit:

Image: A diagram of the GOOLOO GP80 unit, highlighting the LED power indicator, power button, Quick Charge Input (IN 5V/9V), Quick Charge Output (OUT 5V/9V), standard USB Output (OUT 5V), LED light, and 12V Car Jumpstart port.

• Dirije endikatè pouvwa: Displays the remaining battery level and charging status.
• Bouton pouvwa: Turns the unit on/off and cycles through LED flashlight modes.
• Quick Charge Input (IN 5V/9V): For recharging the GP80 unit.
• Quick Charge Output (OUT 5V/9V): Pou aparèy konpatib ak chaj rapid.
• Standard USB Output (OUT 5V): Pou chaje aparèy USB estanda yo.
• Limyè ki ap dirije: Bati-an flach.
• 12V Car Jumpstart Port: Connection point for the smart jumper cable.

4. Setup and Charging the GP80

Before first use, fully charge your GOOLOO GP80 unit.

4.1 Premye chaj

1. Connect the Quick Charge Micro USB Cable to the GP80's Quick Charge Input (IN 5V/9V) port.
2. Connect the other end of the USB cable to a compatible USB wall adapter (not included) or a car charger.
3. The LED power indicators will illuminate and flash during charging. All four LEDs will be solid when the unit is fully charged.

It is recommended to fully charge the unit every 3-4 months to maintain battery health, even if not in use.

5. Operasyon Enstriksyon

5.1 Demare yon Veyikil

Swiv etap sa yo ak anpil atansyon pou demarre machin ou an:

1. Ensure the GP80 unit has at least 50% charge (two LED indicators lit).
2. Connect the blue plug of the smart jumper cable into the 12V Car Jumpstart Port on the GP80 unit. Ensure a firm connection.
3. Tache a wouj (+) clamp of the smart jumper cable to the positive (+) terminal of your vehicle's battery.
4. Tache a nwa (-) clamp of the smart jumper cable to the negative (-) terminal of your vehicle's battery.
5. Yon fwa clamps are correctly connected, the indicator light on the smart jumper cable will turn vèt solid, indicating it is safe to proceed. If it shows a different color or flashes, refer to the troubleshooting section.
6. Demarre motè machin ou an.
7. Once the engine starts, immediately remove the smart jumper cable's nwa (-) clamp from the vehicle battery's negative terminal.
8. Then, remove the wouj (+) clamp from the vehicle battery's positive terminal.
9. Finally, disconnect the blue plug of the smart jumper cable from the GP80 unit.

Important: Do not repeatedly attempt to jump start a large engine vehicle in a short period. Allow the unit to cool down between attempts if necessary.

Image: The smart jumper clamps with an overlay listing protection features such as short circuit, high temperature, reverse connection, over current, surge voltage, reverse polarity, high voltage, and over discharge protection.

5.2 Itilizasyon kòm yon Bank Ekstèn Pòtab

The GP80 can charge your electronic devices:

1. Connect your device's USB charging cable to either the Quick Charge Output (OUT 5V/9V) or the standard USB Output (OUT 5V) port on the GP80.
2. Press the power button once to begin charging. The LED indicators will show the remaining battery level.
3. Disconnect your device once fully charged. The GP80 will automatically turn off after a period of inactivity.

Image: The GOOLOO GP80 unit connected via USB cables to charge an iPhone and another smartphone, demonstrating its quick charging capability for various devices like iPads, PSPs, and cameras.

5.3 Sèvi ak flach ki ap dirije a

Lanp pòch LED entegre a ofri twa mòd:

1. Pou aktive: Long press the power button for approximately 3 seconds to turn on the LED light in Segondè mòd.
2. Pou chanje mòd yo: Press the power button again to switch to Strobe mode. Press it a third time to activate SOS flashing mode.
3. Pou fèmen: Long press the power button again for approximately 3 seconds.

Image: The GOOLOO GP80 unit with its LED flashlight illuminated, showing icons for Strong, SOS, and Strobe light modes, set against a dark, rainy background with a car.

6. Prekosyon sekirite

To ensure safe operation and prevent damage to the unit or injury, always observe the following safety guidelines:

• Do not use the jump starter if the smart jumper cable or the unit itself is damaged.
• Pa eseye demarre yon machin ak yon batri ki domaje anpil oswa ki jele.
• Ensure proper polarity when connecting the clamps (red to positive, black to negative). The smart jumper cable provides protection against reverse polarity.
• Pa pèmèt cl a wouj ak nwaamps to touch each other once connected to the GP80.
• Kenbe aparèy la lwen timoun yo.
• Do not expose the unit to water, extreme temperatures, or direct sunlight for extended periods.
• Pa demonte oswa modifye inite a.
• Use only the provided smart jumper cable and Quick Charge Micro USB cable.
• Disconnect the smart jumper cable from the vehicle battery within 30 seconds after the engine starts.

NAN. Depanaj

Si ou rankontre pwoblèm ak GP80 ou a, gade pwoblèm ak solisyon komen sa yo:

8. Espesifikasyon

Detailed technical specifications for the GOOLOO GP80:

9. Swen ak Antretyen

Proper care ensures the longevity and performance of your GP80:

• Chaje: Recharge the unit every 3-4 months, even if not used, to maintain battery health.
• Depo: Store the GP80 in its kit bag in a cool, dry place, away from direct sunlight and extreme temperatures.
• Netwayaj: Siye aparèy la avèk yon twal sèk epi mou. Pa sèvi ak pwodui chimik ki agresif oswa materyèl abrazif.
• Dispozisyon batri: Do not dispose of the unit in household waste. Follow local regulations for lithium polymer battery recycling.

10. Garanti ak sipò

GOOLOO products are designed for reliability and performance. For warranty information, please refer to the warranty card included in your package or visit the official GOOLOO websit.

For technical support, troubleshooting assistance, or any questions regarding your GOOLOO GP80, please contact GOOLOO customer service through their official channels.