DANOPLUS WBGT + HI Heat Stress Meter KB0296 Instruction Manual

1. Entwodiksyon

The DANOPLUS WBGT + HI Heat Stress Meter (Model KB0296) is a portable device designed to measure and monitor heat stress levels in various environments. It provides simultaneous readings for Wet Bulb Globe Temperature (WBGT), Heat Index (HI), Air Temperature, and Relative Humidity (RH). This manual provides essential information for the proper setup, operation, and maintenance of your device.

Image 1: The DANOPLUS WBGT + HI Heat Stress Meter, a 2-in-1 device for measuring heat stress.

Karakteristik kle:

• Simultaneous display of WBGT, HI, Air Temperature, and Relative Humidity.
• Switchable IN/OUT mode for indoor and outdoor measurements.
• Programmable buzzer and red LED danger zone warning.
• Adjustable audible alarm volume (75dB / 60dB / mute).
• Adjustable alarm threshold.
• Endikatè batri ki ba.
• Direct radiation effect measurement with ABS black globe.
• Wearable design with included arm strap and tripod mountable option.

2. Pake kontni

Tanpri verifye sa ki nan pake a lè w resevwa li pou asire w tout atik yo la epi yo pa domaje:

• 1 x DANOPLUS WBGT + HI Heat Stress Meter (Model KB0296)
• 2 x Boukl
• 1 x Arm Strap
• 2 x AAA pil
• 1 x manyèl enstriksyon angle

Image 2: The DANOPLUS WBGT + HI Heat Stress Meter with its packaging and included accessories.

3. Enfòmasyon sou Sekirite

• Read this manual thoroughly before operating the device.
• Do not expose the device to extreme temperatures, direct sunlight for prolonged periods, or high humidity.
• Evite jete aparèy la oswa soumèt li a gwo enpak.
• Pa eseye demonte oswa modifye aparèy la. Sa ap anile garanti a.
• Kenbe aparèy la pa rive nan men timoun yo.
• Jete pil yo itilize dapre règleman lokal yo.

4. Enstalasyon

4.1 Enstalasyon batri

1. Jwenn kouvèti konpatiman batri a sou dèyè aparèy la.
2. Glise oswa deklipe kouvèti a pou ouvri konpatiman an.
3. Mete de pil AAA yo nan plas yo, asire w polarite a kòrèk (+/-).
4. Ranplase kouvèti lòj batri a byen.

4.2 Premye pouvwa sou

Peze epi kenbe la POWER/SET button to turn on the device. The display will illuminate and show the current readings.

4.3 Montaj Opsyon

The device offers flexible mounting for various applications:

• Wearable Strap: Attach the arm strap using the provided buckles to wear the device on your arm for personal monitoring.
• Montaj tripod: The device has a standard tripod screw hole for mounting on a tripod (tripod not included).
• Mi Mount: Use the integrated slots on the back of the device to hang it on a wall or other vertical surface.

Image 3: The DANOPLUS WBGT + HI Heat Stress Meter demonstrating its three usage modes: wearable, tripod-mounted, and wall-mounted.

5. Operasyon

5.1 Konprann ekspozisyon an

The digital display shows the following measurements:

• WBGT: Wet Bulb Globe Temperature.
• bonjou: Endèks Chalè.
• TANP: Tanperati lè a.
• IMIDITE: Imidite relatif.

The display also indicates the current mode (IN/OUT) and alarm status.

5.2 Switching IN/OUT Mode

Peze a MÒD button (usually indicated by an arrow or 'IN/OUT' symbol) to toggle between indoor (IN) and outdoor (OUT) measurement modes. The appropriate icon will appear on the display.

5.3 Fikse Seuil Alam yo

1. Peze epi kenbe la SET button until the alarm threshold value starts flashing.
2. Sèvi ak la UP epi DESANN arrow buttons to adjust the desired WBGT or HI alarm threshold.
3. Peze SET again to confirm and move to the next setting, or wait for the display to return to normal operation.

5.4 Ajiste Volim Alam lan

The device features an adjustable audible alarm. Press the VOLIM button (if available, or cycle through settings with SET) to switch between 75dB, 60dB, or mute. A visual indicator on the display will confirm the selected volume level.

Image 4: The device offers adjustable alarm volume settings for 75dB, 60dB, or mute.

5.5 Interpreting Danger Zone Indicators

The meter provides visual and audible warnings when heat stress levels exceed predefined thresholds. A red LED will flash, and the buzzer will sound when the measured value is over the alarm threshold. The display also shows specific danger level indicators:

• Atansyon: WBGT: 26.7 ~ 29.4 °C (80 ~ 84.9 °F) / HI: 27 ~ 31.9 °C (80.6 ~ 89.4 °F)
• Ekstrèm Atansyon: WBGT: 29.4 ~ 31 °C (85 ~ 87.9 °F) / HI: 32 ~ 40.9 °C (89 ~ 105.6 °F)
• Danje: WBGT: 31 ~ 32.2 °C (88 ~ 89.9 °F) / HI: 41 ~ 53.9 °C (105.7 ~ 129 °F)
• Extreme Danger: WBGT: > 32.2 °C (> 90 °F) / HI: ≥ 54 °C (> 129 °F)

Imaj 5: Egzanpamples of the danger zone indicators on the display, showing WBGT and Heat Index thresholds.

Image 6: The red LED alarm light indicates when measured heat stress values exceed the set threshold.

6. Antretyen

6.1 Netwayaj

Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure no liquid enters the device openings.

6.2 Ranplasman batri

When the low battery indicator appears on the display, replace the AAA batteries as described in Section 4.1. Remove batteries if the device will not be used for an extended period.

6.3 Depo

Store the device in a cool, dry place away from direct sunlight and extreme temperatures. Keep it in its original packaging or a protective case when not in use.

NAN. Depanaj

8. Espesifikasyon

9. Garanti ak sipò

DANOPLUS products are manufactured to high-quality standards. For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official DANOPLUS websit la. Tanpri konsève prèv acha ou a pou nenpòt reklamasyon garanti.