Entwodiksyon
This manual provides detailed instructions for the installation, operation, and maintenance of your VOVO STYLEMENT TCB-090S Smart Bidet Toilet. This advanced toilet features an automatic dual flush system, a heated seat, warm water and dryer functions, a wireless remote control, and an auto-deodorization system. Please read this manual thoroughly before installation and use to ensure proper function and safety.
Enfòmasyon sou Sekirite
Observe all safety precautions to prevent injury or damage.
- Sekirite elektrik: The unit requires a 120 Volt electrical outlet. Ensure the outlet is properly grounded and installed according to local electrical codes. Do not use extension cords.
- Pwovizyon dlo: Asire w ke ekipman pou dlo a koupe anvan ou kòmanse enstalasyon an.
- Pwa: The toilet unit is heavy (approximately 110 pounds). Exercise caution and seek assistance during lifting and placement to prevent injury.
- Netwayaj: Dekonekte kouran an anvan ou netwaye. Sèvi ak sèlman pwodui netwayaj ki pa twò fò epi ki pa abrazif.
Kontni pake
Verify that all components are present before installation.
- VOVO STYLEMENT TCB-090S Smart Bidet Toilet Unit
- Wireless Remote Controller
- Installation Kit (includes proprietary wax ring, bolts, water line fittings)
- Manyèl Itilizatè (dokiman sa a)
Enstalasyon
Li rekòmande pou enstalasyon pwofesyonèl. Asire w ke tout kòd plonbri ak elektrik lokal yo respekte.
1. Preparasyon
- Fèmen prensipal ekipman pou dlo ki nan zòn twalèt la.
- Remove the existing toilet. Clean the flange area thoroughly.
- Ensure a 120V grounded electrical outlet is available within reach of the toilet's power cord.
- Verify product dimensions for proper fit: 28.3"D x 16.1"W x 21"H.
Figure 1: Product dimensions and electrical outlet requirement. An outlet is required for operation.
2. Toilet Placement
- Install the provided proprietary wax ring onto the bottom of the toilet unit, not directly on the floor flange.
- Carefully align the toilet with the floor bolts and lower it into place. Due to its weight (110 lbs), assistance is recommended.
- Once seated, gently press down on the toilet to ensure a proper seal with the wax ring.
- Tighten the floor bolts securely, but do not overtighten to avoid cracking the ceramic.
Figure 2: Lowering the toilet unit onto the floor bolts for installation.
3. Koneksyon dlo
- Connect the water supply line to the toilet's inlet using the supplied fittings. Ensure all connections are hand-tightened, then use a wrench for a final quarter-turn.
- Louvri tiyo prensipal dlo a dousman epi tcheke si gen flit.
Figure 3: Connecting the water supply line to the toilet unit.
4. Koneksyon elektrik
- Plug the toilet's power cord into the grounded 120V electrical outlet.
Figure 4: Plugging the power cord into a grounded electrical outlet.
Operasyon
Your VOVO STYLEMENT TCB-090S is equipped with various smart features for enhanced comfort and hygiene.
Automatic Dual Flush
The smart seat sensor detects the duration of use to automatically select between a small flush or a full flush (1.12 GPF at 35 PSI), providing hands-free operation and water conservation.
Figure 5: Illustration of the automatic dual flush system, differentiating between large and small flushes based on seat occupancy time.
Heated Seat, Warm Water, and Warm Dryer
Enjoy an optimized experience with an adjustable heated seat, warm water for washing, and a warm air dryer with three adjustable temperature settings (93.2°F to 104°F).
Figure 6: Visual representation of the heated seat, warm air dryer, and automatic deodorization functions.
3-in-1 Stainless Steel Nozzle
The self-cleaning stainless steel nozzle offers Posterior, Feminine, and Turbo Wash functions. The nozzle automatically cleans itself before and after each use.
Figi 7: Detaye view of the multi-function stainless steel nozzle and its self-cleaning capability.
Wireless Remote Controller
All functions, including wash modes, water pressure, seat temperature, and dryer settings, are controlled via the wireless remote.
Figure 8: Layout of the wireless remote control for the TCB-090S, showing buttons for Posterior, Feminine, Turbo Wash, Dry, Position, Seat Temp, Water Temp, and Pressure adjustments.
- Lave dèyè: Press the "Posterior" button for rear cleansing.
- Lave pou fanm: Press the "Feminine" button for front cleansing.
- Lave Turbo: Activates a stronger wash function. Water pressure can be adjusted during operation.
- Seche rad: Use the "Dry" function after washing.
- Ajisteman: Use the arrow buttons to adjust water pressure, nozzle position, seat temperature, and water temperature.
- Auto Deodorization: The system automatically activates to remove odors.
Soft Close Lid and LED Night Light
The seat and lid feature a soft-close mechanism to prevent slamming. An integrated LED night light illuminates the bowl for convenience in low light conditions.
Figure 9: The soft-close function prevents the seat and lid from slamming.
Antretyen
Regular cleaning and maintenance ensure optimal performance and longevity of your smart bidet toilet.
- Netwayaj bouch: The stainless steel nozzle performs an automatic self-cleaning cycle. For additional cleaning, use the "Nozzle Cleaning" button on the remote.
- Netwayaj eksteryè: Siye sifas eksteryè yo ak yon mou, damp cloth and a mild, non-abrasive cleaner. Do not use harsh chemicals, abrasive pads, or strong detergents, as these can damage the finish.
- Seat Cleaning: The polypropylene seat can be cleaned with a mild soap solution. Avoid prolonged exposure to strong cleaning agents.
- Dekoneksyon pouvwa: Always unplug the unit from the electrical outlet before performing any deep cleaning or maintenance.
Depanaj
Si ou rankontre pwoblèm, gade pwoblèm ak solisyon komen sa yo.
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| No power / Unit not turning on | Kòd kouran an pa branche; disjonktè a sote; kouran an koupetage. | Ensure the power cord is securely plugged into a live outlet. Check the circuit breaker. |
| No water spray / Weak spray | Water supply valve closed; clogged nozzle; low water pressure. | Open the water supply valve fully. Perform a nozzle cleaning cycle. Check household water pressure. |
| Syèj chofe a pa chofe | Fonksyon chèz chofe a etenn; tanperati a twò ba. | Activate the heated seat function via the remote. Increase the seat temperature setting. |
| Remote kontwòl pa reponn | Pil mouri; telekòmand lan pa nan zòn nan; entèferans. | Replace remote batteries. Ensure remote is used within close proximity to the toilet. Remove any obstructions. |
| Toilet not flushing automatically | Seat sensor malfunction; power issue. | Ensure the unit has power. If the issue persists, contact customer support. |
For issues not listed here, or if troubleshooting steps do not resolve the problem, please contact VOVO customer support.
Espesifikasyon
| Karakteristik | Detay |
|---|---|
| Nimewo Modèl | TCB-090S |
| Mak | VOVO |
| Dimansyon pwodwi (D x W x H) | 28.3" x 16.1" x 21" |
| Pwa atik | 110 liv |
| Koulè | Blan |
| Materyèl | Stainless Steel (nozzle), Polypropylene (seat) |
| Kalite enstalasyon | Floor monte |
| Voltage | 120 Volts |
| Flush Volim | 1.12 GPF (Gallons Per Flush) at 35 PSI |
| Sètifikasyon | cUPC, cETLus certified |
| Konpozan ki enkli | Enstalasyon Twous |
| UPC | 850016152374 |
Garanti ak sipò
For warranty information, product support, or to purchase protection plans, please contact VOVO USA directly.
- Vandè: VOVO USA
- Plan Pwoteksyon: Plan pwoteksyon opsyonèl pou 3 zan ak 4 zan disponib.
- Retounen: Pwodui sa a kalifye pou retounen fasil nan 30 jou.
Refer to your purchase documentation or the VOVO official websit la pou jwenn enfòmasyon kontak ki pi resan yo ak kondisyon garanti detaye yo.