1. Entwodiksyon
This manual provides detailed instructions for the installation, operation, and maintenance of your WSDCAM 22R-03C Wireless Anti-Theft Vibration Bike Alarm. Please read this manual thoroughly before using the product to ensure proper function and longevity. This alarm system is designed to provide security for various vehicles and property by detecting vibrations and emitting a loud alert.
2. Pake kontni
Verifye ke tout atik yo prezan nan pakè ou a:
- 2 x WSDCAM 22R-03C Alarm Units
- 2 x kontwòl remote
- 6 x AA Batteries (pre-installed in alarm units)
- Mounting Accessories (double-sided stickers, cable ties)
- Manyèl Itilizatè (dokiman sa a)
Image 1: Contents of the WSDCAM 22R-03C alarm package, showing two alarm units and two remote controls.
3. Pwodwi souview
3.1. Karakteristik kle
- High Decibel Alarm: Emits a loud 113dB alarm to deter potential threats.
- Volim reglabl: Three levels of volume adjustment to suit different environments.
- Sansiblite reglabl: Seven levels of vibration sensitivity, from gentle touch to strong impact.
- Konsepsyon ki enpèmeyab: IP55 klase pou itilizasyon deyò nan divès kondisyon metewolojik.
- Wireless Remote Control: Operates the alarm from up to 63 feet away.
- Fonksyon Rechèch Veyikil: Helps locate your vehicle in crowded areas.
- Aplikasyon versatile: Suitable for bicycles, motorcycles, scooters, cars, trailers, luggage, doors, and windows.
3.2. Eleman yo
Each alarm unit consists of the main alarm body and a remote control. The alarm unit houses the siren, vibration sensor, and battery compartment.
Image 2: Remote control layout showing Arm, Disarm, Change Tone, and Search functions.
4. Enstalasyon
4.1. Enstalasyon batri
The alarm units come with 3 AA batteries pre-installed. If replacement is needed:
- Locate the battery compartment cover on the back of the alarm unit.
- Open the cover using a small screwdriver.
- Mete 3 nouvo pil AA, asire w polarite a kòrèk (+/-).
- Fèmen kouvèti lòj batri a byen.
The remote control uses a CR2032 button cell battery. To replace:
- Gently pry open the remote control casing.
- Retire ansyen batri CR2032 la.
- Insert a new CR2032 battery with the positive side facing up.
- Fèmen kontwòl remote la casing.
4.2. Mounting the Alarm Unit
The alarm unit can be mounted using either double-sided stickers or cable ties, depending on the surface and desired security level.
- Using Double-Sided Stickers:
- Clean the mounting surface thoroughly to ensure it is free of dust and grease.
- Peel off the protective film from one side of the double-sided sticker and apply it to the back of the alarm unit.
- Peel off the remaining protective film and firmly press the alarm unit onto the desired surface.
- Using Cable Ties:
- Thread the provided cable ties through the designated slots on the back of the alarm unit.
- Securely fasten the alarm unit to a stable part of your bicycle, motorcycle, or other property. Ensure it is tight enough to prevent movement but not so tight as to damage the unit or the mounting surface.
Image 3: The alarm unit installed on a bicycle, highlighting its waterproof design and easy installation methods.
5. Operasyon Enstriksyon
5.1. Fonksyon kontwòl Remote
- Arm Button (Locked Padlock Icon): Press once to arm the alarm. The alarm will beep once to confirm it is armed. Any detected vibration will trigger the alarm.
- Disarm Button (Unlocked Padlock Icon): Press once to disarm the alarm. The alarm will beep twice to confirm it is disarmed.
- Change Tone Button (Icône Lightning Bolt): Press to cycle through the three available alarm tones.
- Vehicle Search Button (Icône Bell): Press to make the alarm unit emit a sound, helping you locate your property.
5.2. Ajisteman Sansiblite
The alarm has 7 levels of adjustable sensitivity. To change the sensitivity level:
- Ensure the alarm is dezame.
- Peze epi kenbe la Change Tone Button (Lightning Bolt Icon) until the alarm unit emits a short beep.
- Chak fwa ou peze bouton an apre sa Change Tone Button will cycle through the sensitivity levels, indicated by a corresponding number of beeps (1 beep for lowest sensitivity, 7 beeps for highest).
- Once you reach the desired sensitivity level, press the Bouton bra (Locked Padlock Icon) to save the setting and arm the alarm.
Image 4: Visual representation of the 7-level adjustable sensitivity feature.
5.3. Ajiste Volim
The alarm features 3 levels of adjustable volume. To change the volume level:
- Ensure the alarm is dezame.
- Peze epi kenbe la Vehicle Search Button (Bell Icon) until the alarm unit emits a short beep.
- Chak fwa ou peze bouton an apre sa Vehicle Search Button will cycle through the volume levels, indicated by a corresponding number of beeps (1 beep for lowest volume, 3 beeps for highest).
- Once you reach the desired volume level, press the Bouton bra (Locked Padlock Icon) to save the setting and arm the alarm.
Image 5: The alarm unit demonstrating its 3-level adjustable volume, reaching up to 113dB.
5.4. Pairing Additional Remotes (If Applicable)
If you need to pair an additional remote control to an alarm unit:
- Ensure the alarm is dezame.
- Peze epi kenbe la Dezame bouton (Unlocked Padlock Icon) on the alarm unit's existing remote for approximately 3 seconds until the alarm unit emits a long beep. This indicates it is in pairing mode.
- Nan 5 segonn, peze la Bouton bra (Locked Padlock Icon) on the new remote control you wish to pair. The alarm unit will beep once to confirm successful pairing.
- Test the new remote control to ensure it functions correctly.
6. Antretyen
6.1. Ranplasman batri
Refer to Section 4.1 for detailed instructions on replacing batteries for both the alarm unit and the remote control. Replace batteries promptly when the alarm unit's sound becomes weak or the remote control's range decreases.
6.2. Netwayaj
Wipe the alarm unit and remote control with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the device's casing or internal components. Ensure the unit is dry before use, especially after exposure to rain.
6.3. Depo
If storing the alarm for an extended period, remove the batteries from both the alarm unit and the remote control to prevent leakage and damage. Store in a cool, dry place away from direct sunlight.
NAN. Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Alarm does not arm/disarm. | Pil kontwòl remote la fèb oswa mouri. Alarm unit batteries are low or dead. Remote se andeyò ranje. | Ranplase batri kontwòl remote. Replace alarm unit batteries. Move closer to the alarm unit (within 63 feet). |
| Alarm is too sensitive or not sensitive enough. | Sensitivity level is incorrectly set. | Adjust the sensitivity level (refer to Section 5.2). |
| Alarm volume is too low or too high. | Volume level is incorrectly set. | Adjust the volume level (refer to Section 5.3). |
| Alarm triggers frequently without apparent cause. | Sensitivity is set too high for the environment (e.g., wind, passing vehicles). | Reduce the sensitivity level (refer to Section 5.2). Ensure the mounting surface is stable. |
| Remote control does not work after battery replacement. | Batri antre mal. Remote needs re-pairing. | Tcheke polarite batri a. Attempt to re-pair the remote control (refer to Section 5.4). |
8. Espesifikasyon
| Karakteristik | Detay |
|---|---|
| Modèl | 22R-03C |
| Volim Alam | Jiska 113 dB (3 nivo reglabl) |
| Sansiblite | 7 nivo reglabl |
| Evalyasyon ki enpèmeyab | IP55 |
| Remote Control Range | Jiska 63 pye (19 mèt) |
| Batri Inite Alam | 3 x pil AA (enkli) |
| Batri kontwòl Remote | 1 x CR2032 button cell battery (included) |
| Dimensions (Alarm Unit) | 3.74 x 1.61 x 0.87 pous (9.5 x 4.1 x 2.2 cm) |
| Weight (Alarm Unit) | Apeprè 9.2 ons (260 gram) |
| Tanperati Fonksyònman | -10 ° C a 60 ° C (14 ° F a 140 ° F) |
9. Garanti ak sipò
WSDCAM products are designed for reliability and performance. For warranty information or technical support, please refer to the official WSDCAM websit la oubyen kontakte sèvis kliyan yo dirèkteman. Kenbe resi acha w la kòm prèv acha pou reklamasyon garanti.
Pou plis asistans, ou ka vizite WSDCAM Store on Amazon.