Sharp Digital Alarm with AccuSet - Automatic Smart Clock User Manual

Entwodiksyon

This manual provides detailed instructions for the setup, operation, and maintenance of your Sharp Digital Alarm Clock with AccuSet. Designed for ease of use, this clock automatically sets the time, making it ideal for all users.

Figi 1: Devan view of the Sharp Digital Alarm Clock.

Karakteristik pwodwi

• AccuSet Otomatikman Mete Tan: Pre-programmed time for hassle-free setup.
• Ajisteman rapid pou lè ete/ete (DST): Simple switch for DST changes.
• Kontwòl gradatè wo/ba: Klate ekspozisyon reglabl.
• Back-up batri: Pre-installed CR2032 battery for time settings retention during power outages.
• Seleksyon Zòn Tan: Chwazi zòn tan lokal ou a fasilman.

Figure 2: Key features of the Sharp Digital Alarm Clock.

Enstalasyon

1. Initial Power-Up and Time Zone Selection

1. Locate the time zone switch on the bottom of the clock.
2. Select your desired time zone (e.g., EST for Eastern Standard Time). The default is Eastern Standard Time.
3. Plug the clock into an approved electrical source. The AccuSet feature will automatically set the correct time.

2. Daylight Savings Time (DST) Adjustment

To adjust for Daylight Savings Time:

• Slide the DST switch on the bottom of the clock to ON to add one hour (+1 hr).
• For Standard Time, slide the switch to OFF to subtract one hour (-1 hr).

3. Sovgad batri

The clock comes with a pre-installed CR2032 button cell battery. This battery retains time settings during power outages. It is located in a screw-secured compartment at the bottom of the clock.

Enstriksyon Operasyon

Figure 3: Top panel controls and display indicators.

1. Mete alam la

1. Peze a SET ALARM button once. The alarm time will flash on the display.
2. Peze a HÈ SET button to adjust the alarm hour. Observe the PM indicator for correct AM/PM setting.
3. Peze a MINIT SET bouton pou ajiste minit alam la.
4. Peze a SET ALARM bouton an ankò pou konfime epi sòti nan mòd konfigirasyon alam lan.

2. Turning Alarm On/Off

• Pou vire alam la ON, peze la ALARM ON / OFF button. The alarm indicator light on the display will illuminate.
• Pou vire alam la OFF, peze la ALARM ON / OFF button again. The alarm indicator light will turn off.

3. Fonksyon repetisyon

Lè alam lan sonnen, peze gwo bouton an SNOOZE bouton ki sitiye anlè revèy la. Alam lan ap sispann tanporèman epi sonnen ankò apre apeprè 9 minit.

4. Dimmer Control

Pou ajiste klète ekspozisyon ki ap dirije a:

• Peze a GRADATÈ HI/LO bouton pou chanje ant paramèt klète ki wo ak ki ba.

Figure 4: Display brightness adjustment.

Antretyen

Battery Replacement (CR2032)

The pre-installed CR2032 battery is designed to last for several years. If the clock loses time during a power outage, the battery may need replacement.

1. Debranche revèy la nan priz elektrik la.
2. Locate the screw-secured battery compartment on the bottom of the clock.
3. Unscrew the compartment cover and carefully remove the old CR2032 battery.
4. Insert a new CR2032 battery, ensuring the correct polarity (+ side up).
5. Remèt kouvèti konpatiman an epi sere l ak vis la.
6. Rebranche revèy la nan priz elektrik la.

Nòt: Jete ansyen pil yo yon fason responsab selon règleman lokal yo.

Depanaj

Espesifikasyon

• Mak: Sharp
• Modèl: B089ZMSR39
• Koulè: Black-red Led
• Kalite ekspozisyon: Digital
• Karakteristik espesyal: Auto Set
• Dimansyon pwodwi: 5.5" lajè x 2.6" wotè
• Sous pouvwa: Fil elektrik
• Batri backup: 1 x CR2032 Lityòm Ion (enkli)
• Pwa atik: 10.2 ons
• UPC: 049353004426
• Manifakti: Sharp

Figi 5: Dimansyon pwodwi a.

Enfòmasyon adisyonèl

For further assistance or product inquiries, please refer to the official Sharp websit oswa kontakte sipò kliyan yo.

Pwodwi sa a fèt pou itilize andedan kay la sèlman.