Richmat Actuator Motor Kit User Manual

Entwodiksyon

This manual provides essential information for the safe and effective use of your Richmat HJA1 Actuator Motor Kit. This kit is designed for adjustable electric bed frames and electric hospital beds, serving as a replacement for various double actuator motors, including specific OKIN and Dewert Limoss models. Please read this manual thoroughly before installation and operation to ensure proper function and longevity of the product.

Figure 1: Richmat HJA1 Actuator Motor Kit, showing the main motor unit, wired remote control, and power cord.

Enfòmasyon sou Sekirite

• Toujou dekonekte kouran an anvan ou fè nenpòt antretyen oswa enstalasyon.
• Asire w tout koneksyon yo byen fèm epi byen branche pou anpeche danje elektrik.
• Do not attempt to open or repair the motor unit yourself. Refer to qualified personnel for service. The product label explicitly states: "NOT TO BE OPENED BY UNAUTHORIZED PERSON".
• Keep the motor and electrical components away from water or excessive moisture.
• Ensure the bed frame is stable and properly supported before and during operation.
• This motor is designed for specific bed applications. Do not use it for purposes other than its intended use.

Kontni pake

Verifye ke tout konpozan yo prezan epi yo pa domaje lè w ap debale yo:

• Richmat HJA1 Actuator Motor Unit
• Wired Remote Control
• Kòd pouvwa

Enstalasyon ak Enstalasyon

The Richmat HJA1 Actuator Motor Kit is designed for straightforward installation, often without the need for special tools. It is a direct replacement for many existing double actuator motors.

1. Preparasyon: Ensure the bed frame is in a stable position and disconnected from any power source. If replacing an existing motor, carefully disconnect and remove the old unit.
2. Plasman Motè: Position the new Richmat HJA1 motor unit securely within the bed frame's designated mounting points. The unit's physical structure and dimensions are designed to match common existing setups.


Figi 2: Pwofesyonèl bò kotefile of the Richmat HJA1 motor unit, illustrating its compact design for bed frame integration.

3. Konekte Remote Control: Plug the wired remote control cable into the corresponding port on the motor unit. Ensure a firm connection.

Figure 3: Underside of the motor unit, showing the connection point for the wired remote control.
4. Konekte fil elektrik: Insert the power cord into the motor unit's power input. Then, plug the power cord into a standard 110V AC electrical outlet.


Figure 4: Detail of the standard 110V AC power plug.

5. Fonksyonalite tès: Once all connections are made, test the motor's functionality using the remote control to ensure proper movement of the bed sections.

Nòt: This model features a wired control pad. The cable length may limit reach, so consider placement for convenient access.

Operasyon

The Richmat HJA1 Actuator Motor is controlled via the included wired remote. The remote typically features buttons for adjusting the head and foot sections of the bed.

Figure 5: The wired remote control unit, showing buttons for adjusting bed positions.

• Head Section Adjustment: Use the designated buttons (often with arrow icons pointing up/down or bed icons) to raise or lower the head section of the bed.
• Foot Section Adjustment: Sèvi ak bouton ki fèt pou sa yo pou monte oswa desann seksyon pye kabann nan.
• Mouvman Similtane: Some remotes may allow for simultaneous adjustment of both head and foot sections.
• Sik devwa: The motor has a duty cycle of 10% max, meaning it can operate for 2 minutes continuously, followed by 18 minutes of rest. Avoid exceeding this duty cycle to prevent overheating and prolong motor life.

Antretyen

The Richmat HJA1 Actuator Motor is designed for minimal maintenance. Follow these guidelines to ensure optimal performance:

• Netwayaj: Wipe the exterior of the motor unit and remote control with a dry or slightly damp twal. Pa sèvi ak pwodui netwayaj abrazif oswa plonje aparèy la nan dlo.
• Enspeksyon kab: Periodically inspect the power cord and remote control cable for any signs of damage, fraying, or kinks. Replace if necessary.
• Tcheke Koneksyon: Ensure all electrical connections remain secure.
• Kondisyon anviwònman: Operate the motor in a dry environment, free from excessive dust or extreme temperatures.

Depanaj

If you encounter issues with your Richmat HJA1 Actuator Motor, refer to the following common problems and solutions:

Si etap depanaj yo pa rezoud pwoblèm nan, tanpri al gade seksyon Garanti ak Sipò a.

Espesifikasyon

Key technical specifications for the Richmat HJA1 Actuator Motor Kit:

Figure 6: Product label detailing the specifications of the Richmat HJA1S motor.

Figure 7: Technical drawing providing detailed dimensions of the motor unit.

• Non modèl: HJA1S (HJA1)
• Antre Voltage: AC 110V 60HZ (Also supports AC 100V-240V 50/60Hz as per label)
• Horsepower/Power: 50 Watts
• Max chaj: 2 x 6500N (Newtons)
• Stroke (Head): 87mm
• Stroke (Foot): 69mm
• Sik devwa: 10% max, 2mins/18mins (2 minutes operation, 18 minutes rest)
• Pwa atik: 5 Kilogram
• ASIN: B07Q3YPSVT
• UPC: 753510673430
• Evalyasyon IP: IP20 (as per label)

Garanti ak sipò

Information regarding specific warranty terms or direct customer support contact details for the Richmat HJA1 Actuator Motor Kit is not provided in the product data. For warranty claims or technical assistance, please refer to the retailer or point of purchase where the product was acquired. They should be able to provide the most accurate and up-to-date support information.