Moukey Ultra-Low Noise 8-Channel Line Stereo Audio Mixer

1. Entwodiksyon

Mèsi pou acha aasing the Moukey MAMX3 Ultra-Low Noise 8-Channel Line Stereo Audio Mixer. This manual provides detailed instructions for the proper setup, operation, and maintenance of your device. Please read this manual thoroughly before use to ensure optimal performance and to prevent damage.

Figure 1: Moukey MAMX3 8-Channel Line Stereo Audio Mixer

2. Enstriksyon Sekirite

• Do not expose this device to rain or moisture to avoid fire or electric shock.
• Pa ouvri c laasing. Pa gen pyès ki ka sèvi ak men itilizatè a anndan an. Konfye tout antretyen bay pèsonèl kalifye.
• Asire ekipman pou pouvwa a voltage koresponn ak egzijans ki espesifye sou inite a.
• Evite mete aparèy la toupre sous chalè oswa anba limyè solèy dirèk.
• Netwaye sèlman avèk yon twal sèk. Pa sèvi ak pwodui netwayaj likid.
• Kenbe soti nan atenn timoun yo.

3. Pwodwi Features

• Antre 8-chanèl: Mix up to eight independent audio signals.
• Stereo/Mono Switching: Flexible input/output configuration for both stereo and mono signals. For stereo, use 1/4-inch (6.35mm) TRS stereo audio male-to-male cables. For mono, eight mono signal inputs are mixed into one mono signal output.
• Kontwòl Volim Endepandan: Each input channel features a dedicated volume knob for precise level adjustment.
• Ultra-Low Noise Operation: Designed for minimal distortion and excellent audio performance.
• Kontra enfòmèl ant ak pòtab: Space-saving design for easy transport and setup.
• Alimantasyon DC 5V: Powered via DC 5V, offering versatile power options (e.g., USB port, power bank, 5V phone plug).
• Konstriksyon dirab: Metal solid casing ensures longevity.

4. Pwodwi souview

The Moukey MAMX3 mixer features a straightforward layout for easy operation. Below are diagrams illustrating the controls and input/output ports.

Figi 2: Kontwòl Panèl Anlè a

• Input 1-8 Level Knobs: Adjust the volume for each individual input channel.
• Mono/Stereo Switches: Select between mono or stereo operation for input channels.
• Channel Output Mix L-R Switch: Combines channels 1-4 and 5-8 into a single stereo output.
• Output A/B Level Knobs: Adjust the overall output volume for Output A and Output B.

Figure 3: Rear Panel Input/Output Ports

• INPUT 1-8 (1/4" TRS/TS): Connect your audio sources here.
• OUTPUT A (1/4" TRS): Main audio output.
• OUTPUT B A/B L-R (1/4" TRS): Secondary audio output, can be configured for A/B or Left/Right stereo.
• DC 5V (USB-C): Pò D 'pouvwa.
• Pow Indicator: Limen lè inite a limen.

Figi 4: Dimansyon pwodwi a

5. Enstalasyon

5.1 Koneksyon pouvwa

1. Locate the DC 5V USB-C port on the rear panel of the mixer.
2. Connect the provided USB cable to the mixer and to a compatible 5V power source (e.g., computer USB port, power bank, or 5V phone charger).
3. The 'Pow' indicator light will illuminate, indicating the mixer is receiving power.

Figure 5: Power Supply Options

5.2 Koneksyon Antre Odyo

1. Connect your audio sources (e.g., microphones, guitars, bass, keyboards, media players) to the INPUT 1-8 jacks using 1/4-inch TRS or TS cables.
2. For stereo input, use 1/4-inch (6.35mm) TRS stereo audio male-to-male cables and ensure the corresponding Mono/Stereo switch is set to 'Stereo'.
3. For mono input, use 1/4-inch TS cables and ensure the corresponding Mono/Stereo switch is set to 'Mono'.

5.3 Koneksyon Sòti Odyo

1. Connect the OUTPUT A and/or OUTPUT B jacks to your amplifier, powered speakers, or recording device using 1/4-inch TRS cables.
2. Asire w tout koneksyon yo byen fèm anvan ou kontinye ak operasyon an.

6. Operasyon Enstriksyon

6.1 Limen/Etenyen

The mixer powers on automatically when connected to a 5V power source. Disconnect the power cable to turn off the unit.

6.2 Adjusting Channel Levels

1. Turn all LEVEL knobs (1-8) and OUTPUT A/B knobs to their minimum position before playing any audio.
2. Kòmanse jwe odyo apati sous konekte ou an.
3. Slowly increase the LEVEL knob for the corresponding input channel until the desired volume is achieved.
4. Adjust the OUTPUT A/B knobs to control the overall master volume.

6.3 Stereo/Mono Mode Selection

Use the Mono/Stereo switches above each channel to select the desired mode. For stereo operation, ensure you are using TRS cables for both input and output and the switch is set to 'Stereo'. For mono operation, set the switch to 'Mono'.

6.4 Mixing Multiple Sources

The MAMX3 allows you to mix up to eight line-level signals. Adjust each channel's LEVEL knob independently to create your desired mix. The Channel Output Mix L-R switch can combine channels 1-4 and 5-8 into a single stereo output for simplified routing.

Figure 6: Mixer in a typical setup

7. Antretyen

• Netwayaj: Sèvi ak yon twal mou epi sèk pou netwaye deyò mixer la. Pa sèvi ak pwodui netwayaj abrazif, solvan, oswa sir.
• Depo: When not in use for extended periods, store the mixer in a cool, dry place away from direct sunlight and extreme temperatures.
• Swen kab: Always handle cables by the connector, not the wire. Avoid bending or crimping cables excessively.

NAN. Depanaj

9. Espesifikasyon

10. Garanti ak sipò

This Moukey MAMX3 mixer comes with a 12-mwa garanti apati dat acha a. Garanti sa a kouvri domaj fabrikasyon ak atizan konn fè nan itilizasyon nòmal.

Garanti a pa kouvri domaj ki te koze pa:

• Move enstalasyon oswa operasyon.
• Modifikasyon oswa reparasyon san otorizasyon.
• Accidents, misuse, or neglect.
• Natural disasters or power surges.

For technical support, warranty claims, or any questions regarding your Moukey MAMX3 mixer, please contact our customer service team through the retailer where you purchased the product or visit the official Moukey websit pou enfòmasyon kontak.

Nòt: Pa gen videyo ofisyèl sou pwodwi a URL (m3u8 format) was provided in the product data. Therefore, no video is embedded in this manual.