Maxxima 755183179899

Maxxima 8-inch Recessed Commercial LED Downlight User Manual

Modèl: 755183179899

Entwodiksyon

This manual provides instructions for the installation, operation, and maintenance of the Maxxima 8-inch Recessed Commercial LED Downlight. This fixture features selectable color temperature (CCT) and wattage, offering versatility for various lighting needs. It is designed for commercial applications and is 0-10V dimmable, Energy Star certified, and UL listed.

Enfòmasyon sou Sekirite

AVÈTISMAN: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installation or servicing. This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.

  • Li tout enstriksyon anvan enstalasyon.
  • Do not install in locations where the operating temperature exceeds -20°C to 40°C (-4°F to 104°F).
  • Apwopriye pou damp kote yo ye.
  • IC Rated: Suitable for direct contact with insulation.
  • Asire w ke tout koneksyon elektrik yo byen fèm epi yo konfòm ak kòd ak òdonans lokal yo.

Kontni pake

Verifye ke tout konpozan yo prezan anvan ou kòmanse enstalasyon an:

  • 1x Maxxima 8-inch Recessed Commercial LED Downlight
  • Pre-wired flexible metal conduit (whip)
  • Ceiling tension spring clips (pre-attached)
  • Fil nwa
  • Safety cable (pre-attached)

Espesifikasyon

KarakteristikSpesifikasyon
Nimewo Modèl755183179899
Antre Voltage110-277 VAC, 50/60 Hz
WattageSeleksyonabl: 12W / 20W / 30W
KlèteUp to 2400 Lumens (depending on wattage seleksyon)
Tanperati Koulè (CCT)Selectable: 2700K / 3000K / 3500K / 4000K / 5000K
Dimming0-10V Dimming (20% to 100% range)
Dimansyon10.2" Diameter x 4.6" Depth
Longè fwèt18.5"
Safety Cable Length19.5"
Tanperati Fonksyònman-20 ° C a 40 ° C
SètifikasyonEnergy Star, UL, IC Rated
MateryèlMetal
Pwa1.83 liv

Enstalasyon & Enstalasyon

Anvan ou kòmanse: Ensure power is disconnected at the circuit breaker. This fixture is designed for flush mount installation into standard ceilings.

  1. Prepare Ceiling Opening: Create an appropriate size opening in the ceiling for the 8-inch downlight. Refer to local building codes for exact requirements.
  2. Koneksyon fil elektrik:
    • Connect the black wire from the fixture's pre-wired whip to the live (hot) wire from the power supply using a wire nut.
    • Connect the white wire from the fixture's pre-wired whip to the neutral wire from the power supply using a wire nut.
    • Connect the green (ground) wire from the fixture's pre-wired whip to the ground wire from the power supply using a wire nut.
    • For 0-10V dimming, connect the purple wire to the dimmer's positive (+) dimming control wire and the gray wire to the dimmer's negative (-) dimming control wire. If not using dimming, cap these wires individually.

    Image: Maxxima 8-inch Recessed Commercial LED Downlight with flexible conduit and wiring.

    Maxxima 8-inch Recessed Commercial LED Downlight with flexible metal conduit and wiring connections

    This image displays the downlight with its pre-wired flexible metal conduit, showing the individual wires for power and dimming connections. The tension spring clips are visible on the sides.

  3. Aparèy sekirite: Gently push the fixture into the ceiling opening. The pre-attached tension spring clips will automatically engage and secure the downlight firmly against the ceiling surface. Ensure the safety cable is also properly secured to a structural element if required by local codes.

Imaj: Dèyè view of the Maxxima 8-inch Recessed Commercial LED Downlight showing tension clips.

Retounen view of Maxxima 8-inch Recessed Commercial LED Downlight with tension spring clips

This image shows the rear of the downlight, highlighting the robust tension spring clips that facilitate secure installation into the ceiling.

Enstriksyon Operasyon

The Maxxima 8-inch Recessed Commercial LED Downlight features selectable color temperature and wattage settings, allowing customization of light output.

  1. Chwazi Tanperati Koulè (CCT): Before installation, or by carefully removing the fixture, locate the 'KELVIN SETTING' switch on the back of the downlight. Slide the switch to select your desired color temperature: 2700K (Soft White), 3000K (Warm White), 3500K (Bright White), 4000K (Neutral White), or 5000K (Daylight).
  2. Chwazi Wattage: Locate the 'WATTAGE SETTING' switch on the back of the downlight. Slide the switch to select your desired wattage: Low (12W), Med (20W), or High (30W). This will adjust the lumen output accordingly.
  3. Fonksyon gradyasyon: If connected to a compatible 0-10V dimmer, the light output can be adjusted from 20% to 100% brightness using the dimmer control.

Image: Maxxima 8-inch Recessed Commercial LED Downlight with CCT and Wattage switch seleksyon yo.

Close-up of Maxxima 8-inch Recessed Commercial LED Downlight showing Kelvin and Wattage switch seleksyon yo

Imaj sa a bay yon detay view of the back of the downlight, clearly showing the two slider switches for adjusting Kelvin (color temperature) and Wattage anviwònman.

Image: Commercial LED Downlight illustrating 5 CCT options.

Maxxima 8-inch Commercial LED Downlight with visual representation of 5 selectable color temperatures

This image visually demonstrates the different color temperature options (2700K, 3000K, 3500K, 4000K, 5000K) available with the 8-inch commercial LED downlight.

Antretyen

The Maxxima LED Downlight requires minimal maintenance. Ensure power is off before cleaning.

  • Netwayaj: Siye aparèy la avèk yon twal mou, sèk, oswa yon ti kras mouye.amp cloth. Do not use harsh chemicals, abrasive cleaners, or solvents, as these may damage the finish or electrical components.
  • Enspeksyon: Enspekte aparèy la detanzantan pou wè si li gen nenpòt siy domaj oswa koneksyon ki lach. Si ou jwenn nenpòt pwoblèm, konsilte yon elektrisyen kalifye.

Depanaj

PwoblèmKòz posibSolisyon
Limyè pa limenNo power to the fixture; Loose wiring connection; Faulty switch/breakerCheck power supply at the circuit breaker. Verify all wire connections are secure. Test the switch or replace if faulty.
Limyè tranbleman oswa diminye san atannIncompatible dimmer; Loose wiring; Voltage fluctuationsEnsure a compatible 0-10V dimmer is used. Check all wiring connections. Consult an electrician for voltage pwoblèm.
Tanperati koulè oswa klète ki pa kòrèkCCT/Wattage selector switches set incorrectlyAdjust the CCT and Wattage selector switches on the back of the fixture to the desired settings.

Garanti

This Maxxima LED Downlight is backed by a 5-year manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use. For warranty claims or further details, please contact Maxxima customer support.

Sipò

For technical assistance, troubleshooting, or product information, please contact Maxxima customer support. You can find contact details and additional resources on the official Maxxima websit la oubyen lè w vizite Magazen Maxxima sou Amazon.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.