MOUNTUP Monitor Mount Instruction Manual

1. Entwodiksyon

Thank you for choosing the MOUNTUP Single Computer Monitor Stand. This full motion gas spring desk monitor arm is designed to enhance your workspace ergonomics by providing flexible positioning for your monitor. It is compatible with most flat and curved computer monitors from 17 to 32 inches, supporting a maximum weight of 17.6 lbs. This manual will guide you through the installation, operation, and maintenance of your new monitor mount.

2. Enfòmasyon sou Sekirite

Please read and understand all instructions before installation and use. Failure to do so may result in personal injury or property damage. If you have any questions, please contact MOUNTUP customer support.

• Pa depase kapasite pwa maksimòm lan ki se 17.6 liv (8 kg).
• Ensure the desk surface is stable and strong enough to support the combined weight of the mount and monitor.
• Always keep the arm in a horizontal position during gas spring tension adjustment to prevent injury or damage.
• Use all provided hardware and follow the installation steps precisely.
• Kenbe timoun ak bèt kay lwen pandan enstalasyon an.

3. Lis anbalaj

Verifye ke tout konpozan yo prezan epi yo pa domaje anvan ou kòmanse enstalasyon an.

Figure 3.1: Key features and compatibility of the MOUNTUP monitor mount.

Pake a ta dwe gen ladan:

• Asanblaj Bra Monitè a (Bra Anwo ak Anba)
• Desk Pole
• C-Clamp Baz
• Konpozan Baz Grommet
• VESA Plak
• All necessary screws, washers, and Allen keys
• Manyèl Enstriksyon

4. Enstalasyon ak Enstalasyon

Choose between C-Clamp or Grommet mounting based on your desk type and preference.

Figure 4.1: The monitor mount offers both C-Clamp ak opsyon pou monte Grommet.

4.1 C-Clamp Enstalasyon

1. Tache C-cl laamp base to the desk pole using the provided screws and Allen key.
2. Position the assembled clamp and pole on the edge of your desk.
3. Sere boulon C-cl laamp Vise jiskaske sipò a byen fikse sou biwo a. Asire w ke li stab epi li pa tranble.

4.2 Grommet Installation

1. Demonte C-cl laamp by removing the screw and plate.
2. Insert the desk pole through the grommet hole in your desk.
3. Secure the pole from underneath the desk using the grommet base plate and tightening knob.

4.3 Attaching VESA Plate to Monitor

1. Mete monitè a ak anpil atansyon fas anba sou yon sifas mou epi pwòp.
2. Align the VESA plate with the mounting holes on the back of your monitor (75x75mm or 100x100mm).
3. Secure the VESA plate to the monitor using the appropriate screws. Do not overtighten.

4.4 Attaching Monitor to Arm

1. Slide the VESA plate with the attached monitor onto the monitor arm's mounting head.
2. Ensure the monitor is fully seated and then tighten the security bolt to prevent accidental detachment.

4.5 Jesyon kab

Route your monitor cables through the integrated cable management clips on the arm and pole to maintain a tidy workspace.

Figure 4.2: Effective cable management keeps your desk organized.

4.6 Gid Videyo Enstalasyon

Video 4.1: A detailed installation guide for the MOUNTUP Single Monitor Mount (MU0025).

5. Operasyon ak Ajisteman

The MOUNTUP monitor arm offers full motion capabilities for optimal viewing konfò.

Figure 5.1: The monitor arm provides extensive adjustability for ergonomic positioning.

5.1 Ajisteman tansyon sous gaz la

Adjust the gas spring tension to match your monitor's weight for smooth and stable positioning. Keep the arm in a horizontal position during adjustment.

Figure 5.2: Adjusting the gas spring tension for optimal monitor support.

• If the arm shoots up: Turn the adjustment screw clockwise ("-" direction) to reduce tension for a lighter monitor.
• If the arm falls down: Turn the adjustment screw counter-clockwise ("+" direction) to increase tension for a heavier monitor.

5.2 Ajisteman enklinezon

The monitor can tilt +90° (up) and -45° (down) to reduce glare and optimize viewang ing.

• Loosen the tilting bolt on the VESA plate.
• Position the screen to your desired angle.
• Retighten the tilting bolt to fix the angle.

5.3 Pivote ak Wotasyon

The arm allows for extensive swivel and 360° rotation for landscape or portrait orientation.

Figure 5.3: Achieve perfect viewing angles with 360-degree rotation.

• Lower Arm Swivel: ±135°
• Upper Arm Swivel: ±180°
• Screen Swivel: ±90°
• Screen Rotation: 360°

5.4 Adjustment Video Guide

Video 5.1: Guide to Gas Spring Tension & Tilting Adjustment for MOUNTUP Monitor Mount (MU0025).

Video 5.2: Demonstration of the MOUNTUP Single Monitor Desk Mount (MU0025) functions.

6. Antretyen

Regular maintenance ensures the longevity and optimal performance of your monitor mount.

• Netwayaj: Siye montaj la ak yon twal mou.amp cloth. Avoid abrasive cleaners or solvents that may damage the finish.
• Enspeksyon: Periodically check all screws and connections to ensure they are tight and secure. Retighten if necessary.
• Sous-gaz: Si tansyon resò gaz la pa bon, gade Seksyon 5.1 pou enstriksyon ajisteman.

NAN. Depanaj

Si ou rankontre nenpòt pwoblèm, gade pwoblèm ak solisyon komen sa yo:

• Monitor arm falls down or shoots up: This indicates incorrect gas spring tension. Refer to Section 5.1 for proper adjustment based on your monitor's weight.
• Monitor tilts forward or backward unexpectedly: The tilting bolt may be loose. Refer to Section 5.2 to loosen, adjust, and retighten the tilting bolt.
• Mòn nan santi l enstab oswa tranble: Asire w ke C-cl laamp or grommet base is securely tightened to the desk. Check all connection points on the arm and VESA plate.
• Difikilte pou deplase bra a: The tension might be too high for a lighter monitor, or the joints might need lubrication (though typically not required for gas spring arms). Ensure no cables are snagged.

Si pwoblèm yo pèsiste, tanpri kontakte sèvis kliyan.

8. Espesifikasyon

9. Garanti ak sipò

All MOUNTUP monitor mounts are backed by 3-year support. Our friendly customer support team is available to answer any questions within 12 hours. For assistance, please visit the official MOUNTUP website or contact us directly through your purchase platform.