MEMBER'S MARK Infrared Tower Heater

Manyèl Itilizatè Aparèy Chofaj Enfrawouj 23 pous MEMBER'S MARK la

Model: Infrared Tower Heater

1. Enstriksyon Sekirite Enpòtan

Please read and understand all safety information before using this heater. Failure to follow these instructions may result in electric shock, fire, property damage, or personal injury. Keep this manual for future reference.

  • Itilize andedan kay la sèlman: This heater is designed for indoor use in residential living spaces. Do not use outdoors.
  • Sekirite elektrik: Always plug the heater directly into a wall outlet. Never use with an extension cord, power strip, or surge protector. Ensure the outlet is rated for the heater's power requirements.
  • Plasman: Place the heater on a firm, level surface. Maintain a minimum clearance of 3 feet (0.9 meters) from walls, furniture, curtains, bedding, and other combustible materials. Do not block air intakes or exhaust openings.
  • Sipèvizyon: Close supervision is necessary when the heater is used by or near children or individuals with reduced physical, sensory, or mental capabilities.
  • Pa kouvri: Never cover the heater or block its air vents, as this can cause overheating and fire.
  • Kote mouye yo: Do not use the heater in bathrooms, laundry areas, or similar damp kote yo ye. Pa janm mete aparèy chofaj la kote li ka tonbe nan yon basen oswa yon lòt veso dlo.
  • Sekirite kont ranvèsman: This heater is equipped with a tip-over safety switch that automatically shuts off the unit if it is accidentally knocked over. If this occurs, place the heater upright on a stable surface, and it will resume operation.
  • Cool-to-Touch: While the exterior is designed to be cool to the touch, the heating elements inside become very hot. Avoid touching the heating elements.
  • Kòd pouvwa: Pa pase fil elektrik la anba tapi oswa pa kouvri l ak tapi, kourè, oswa kouvèti menm jan an. Fè aranjman pou kòd la lwen zòn trafik yo kote li pa pral tonbe sou li.
Member's Mark Infrared Tower Heater packaging showing key features like 3 adjustable heat settings and tip-over safety sensor.

Figure 1: Product packaging highlighting key features including the Tip-Over Safety Sensor.

2. Pwodwi souview

The MEMBER'S MARK 23-inch Infrared Tower Heater provides supplemental heat for indoor living spaces. It features three infrared quartz tubes that generate gentle, even heat without drying out the room's air. The oscillating front panel louvers ensure a wider distribution of warmth. This heater includes 3 adjustable heat settings, an adjustable digital thermostat, and an electronic timer function. A remote control is provided for convenience.

Devan view of the Member's Mark 23-inch Infrared Tower Heater with its digital display showing 70 degrees Fahrenheit.

Figi 2: Devan view of the Infrared Tower Heater, showcasing its digital display and sleek design.

3. Enstalasyon

  1. Debake: Carefully remove the heater from its packaging. Retain packaging materials for future storage or transport.
  2. Plasman: Place the heater on a stable, level, and heat-resistant surface. Ensure it is at least 3 feet (0.9 meters) away from any walls, furniture, or other objects. Do not place it on carpeting or rugs that may obstruct airflow.
  3. Koneksyon pouvwa: Locate the power cord at the back of the unit. Ensure the main power switch (located on the back) is in the 'OFF' position. Plug the power cord directly into a grounded 120V AC wall outlet.
  4. Batri Remote Control: The remote control requires 2 AAA batteries (not included). Open the battery compartment on the back of the remote and insert the batteries, observing the correct polarity (+/-).
Retounen view of the Member's Mark Infrared Tower Heater showing the power cord and the main power switch.

Figi 3: Dèyè view of the heater, illustrating the power cord and the main power switch.

Member's Mark Infrared Tower Heater placed in a living room setting on a rug, next to a sofa.

Figure 4: Heater positioned in a room, demonstrating appropriate placement away from furniture.

4. Operasyon Enstriksyon

Ou ka opere aparèy chofaj la avèk panèl kontwòl ki sou aparèy la oswa avèk kontwòl remote ki vini avèk li a.

Kontwòl Panel

Close-up of the digital control panel on the Member's Mark Infrared Tower Heater, showing buttons for power, temperature, timer, and oscillation.

Figi 5: Detaye view of the heater's digital control panel.

  • Main pouvwa switch: Ensure the main power switch on the back of the unit is in the 'ON' position.
  • Bouton pouvwa (U): Press to turn the heater ON or OFF. The digital display will illuminate when ON.
  • Ajisteman Tanperati (^ / v): Use the Up (^) and Down (v) arrows to set your desired temperature. The temperature range is typically between 50°F (10°C) and 90°F (32°C).
  • Heat Settings (Mode/Fan): Press the 'Mode' or 'Fan' button to cycle through the 3 available heat settings (e.g., Low, High, Eco). The display will indicate the current setting.
  • Timer Function (Ikòn revèy): Press the 'Timer' button to activate the auto shut-off timer. Each press increases the timer by one hour, up to a maximum of 12 hours. The heater will automatically turn off after the set time.
  • Oscillation (Icône osilasyon): Press the 'Oscillation' button to start or stop the internal louvers from oscillating, distributing heat more widely.

Kontwòl Remote

Close-up of the remote control for the Member's Mark Infrared Tower Heater, showing buttons for power, temperature, time, and oscillation.

Figure 6: Remote control for convenient operation of the heater.

The remote control duplicates the functions of the control panel. Point the remote control directly at the heater's display panel for optimal response.

  • ON/OFF: Turns the heater on or off.
  • TEMP UP/DOWN: Ajiste tanperati a vle.
  • HI/LO/ECO: Cycles through heat settings.
  • TAN: Sets the auto shut-off timer.
  • OSC: Activates or deactivates oscillation.

5. Antretyen

Antretyen regilye asire pèfòmans optimal ak lonjevite aparèy chofaj ou a.

  • Netwayaj: Before cleaning, always turn off the heater, unplug it from the wall outlet, and allow it to cool completely. Use a soft, damp twal pou siye sifas ekstèn yo. Pa sèvi ak pwodui netwayaj abrazif oswa solvan. Asire w ke pa gen dlo ki antre anndan aparèy chofaj la.
  • Air Intake/Filter: Periodically check the air intake vents at the back of the heater for dust and debris. Use a vacuum cleaner with a brush attachment to gently clean these areas.
  • Depo: Lè w pa ap itilize aparèy chofaj la, sere l nan yon kote ki fre epi sèk. Li rekòmande pou w sere l nan anbalaj orijinal li pou pwoteje l kont pousyè ak domaj.

NAN. Depanaj

Si w gen pwoblèm ak aparèy chofaj ou a, gade pwoblèm ak solisyon komen sa yo:

PwoblèmKòz posibSolisyon
Chofaj pa limen.
  • Kòd kouran an pa byen branche.
  • Main power switch is OFF.
  • Pa gen pouvwa nan priz la.
  • Entèriptè pou baskile a aktive.
  • Pwoteksyon surchof aktive.
  • Ensure cord is firmly plugged into a grounded outlet.
  • Turn the main power switch on the back to 'ON'.
  • Check household circuit breaker or try another outlet.
  • Place heater upright on a flat, stable surface.
  • Unplug the heater, wait 10 minutes for it to cool, then plug back in.
Aparèy chofaj la pa pwodui chalè.
  • Tanperati a twò ba.
  • Heat setting is on 'Fan Only' or 'Eco' mode.
  • Ogmante tanperati ou vle a.
  • Cycle through heat settings to 'Low' or 'High'.
Remote kontwòl pa travay.
  • Pil yo mouri oswa yo mal enstale.
  • Obstriksyon ant kontwòl remote la ak aparèy chofaj la.
  • Ranplase pil yo (2 AAA) epi asire w polarite a kòrèk.
  • Retire tout objè ki bloke chemen siyal la.

Si pwoblèm nan pèsiste apre ou fin eseye solisyon sa yo, kontakte sèvis kliyan.

7. Espesifikasyon

KarakteristikDetay
MakMEMBER'S MARK
ModèlEnfrawouj Tower aparèy chofaj
ASINB084YVXJGL
Dimansyon (L x W x H)10.5 x 9.5 x 23.25 pous (26.67 x 24.13 x 59.06 cm)
Pwa23 liv (10.43 kg)
Zòn chofajJiska 1000 pye kare
Anviwònman chalè3 (Low, High, Eco)
Karakteristik espesyalDigital Thermostat, Timer Function, Remote Control, Oscillation, Cool-to-Touch Exterior, Tip-Over Safety Switch
Eleman chofajInfrared Quartz Tubes
KoulèBrown

8. Garanti ak sipò

For warranty information and customer support, please refer to the documentation provided at the time of purchase or contact the retailer/manufacturer directly. Keep your proof of purchase for warranty claims.

For further assistance or inquiries, please visit the MEMBER'S MARK official websit oswa kontakte depatman sèvis kliyan yo.

© 2025 MEMBER'S MARK. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.