Godox TT350N Speedlite Flash for Nikon DSLR Cameras User Manual

1. Entwodiksyon

Mèsi pou acha aasing the Godox TT350N Speedlite Flash. This compact and versatile flash unit is designed for Nikon DSLR cameras, offering full TTL functionality, high-speed sync, and a built-in 2.4G wireless X system. This manual provides detailed instructions for proper operation and maintenance to ensure optimal performance.

2. Enfòmasyon sou Sekirite

• Toujou kenbe pwodui sa a sèk. Pa sèvi ak lapli oswa damp kondisyon yo.
• Do not disassemble. If repairs become necessary, this product must be sent to an authorized maintenance center.
• Kenbe soti nan atenn timoun yo.
• Pa sèvi ak flach la lè gen gaz, pwodui chimik oswa lòt materyèl ki ka pran dife.
• Do not touch the flash head immediately after use, as it may be hot.
• Use only AA batteries as specified. Do not mix new and old batteries or different types of batteries.

3. Pwodwi souview

3.1 Karakteristik kle

• Fonksyonalite TTL konplè: Supports HSS (up to 1/8000s), FEC, front and rear curtain sync, multi-flash, and manual flash.
• Dot-Matrix LCD: Provides clear and simple operation with an intuitive display.
• Fonksyon pwisan: Includes TTL autoflash, 1/8000 high-speed synchronization, flash exposure compensation, flash exposure lock, and modeling flash.
• Wireless Grouping System: Features a 2.4G wireless system with up to 5 groups and 32 channels to meet various shooting requirements.
• Pwoteksyon Surchof: Designed with protection against overheating for extended use.
• Pèfòmans efikas: Guide Number (GN) of 36 (m ISO 100, @ 105mm), 22 power outputs (1/1-1/128). Recycling time between 0.1 and 2.2 seconds, providing approximately 210 full power flashes with 2500mA Ni-MH batteries.
• Fonksyon Zoom: Automatic and manual zoom from 24mm to 105mm.
• Personal Function Settings (C.Fn): Customizable settings for personalized operation.
• Gwo konpatibilite: Can act as a master unit to control other Godox slave units (AD600, AD600M, AD360II-C, AD360II-N, V860IIN, V850II, TT685N, TT600) or as a slave unit triggered by Godox master units (X1T-N, V860IIN, V850II, TT685N, TT600).

3.2 Kontni pake a

• 1 x Godox TT350N Flash Unit
• 1 x Mini Sipò
• 1 x ka pwoteksyon
• 1 x Color Filter
• 1 x manyèl itilizatè
• 1 x VFOTO Lens Cleaning Cloth

Image: The Godox TT350N flash unit, mini stand, protective case, color filter, user manual, and lens cleaning cloth are included in the package.

3.3 Non ak Fonksyon Pati

Image: Detailed diagram showing the various parts of the Godox TT350N flash and their corresponding functions.

1. Zoom Selection Button
2. Bouton Seleksyon Mode
3. Custom Function Setting Button (reusable button, long press for 2 seconds)
4. Bouton tès / Flash Ready Endikatè
5. LCD Panel
6. Bouton Sync gwo vitès
7. S1/S2 Optic Slave Triggering Selection Button (in non-wireless mode)
8. Group/Channel Button (reusable button, in wireless mode)
9. Chanjman pouvwa
10. Fèmen bag
11. Bouton seleksyon san fil (bouton ki kapab itilize ankò, peze long pou 2 segonn)
12. Hotshoe
13. Mete bouton
14. Chwazi Dial
15. Lòj batri
16. Capteur kontwòl optik
17. Konsantre Asistan gwo bout bwa
18. Flash Head
19. Catchlight Panel
20. Bati-an panèl lajè

4. Enstalasyon

4.1 Enstalasyon batri

The Godox TT350N uses two AA batteries. Ni-MH batteries are recommended for optimal performance and recycling time. Alkaline batteries (LR6) can also be used.

1. Louvri kouvèti konpatiman batri a ki sitiye sou bò inite flash la.
2. Mete de pil AA yo dapre endikatè polarite yo (+/-) anndan konpatiman an.
3. Fèmen kouvèti lòj batri a byen.

4.2 Monte sou Kamera a

To mount the flash unit onto your camera's hotshoe:

1. Loosen the lock ring on the flash unit by turning it counter-clockwise.
2. Slide the flash's hotshoe fully into your camera's hotshoe mount.
3. Tighten the lock ring by turning it clockwise until the flash is securely attached to the camera.

Image: The Godox TT350N flash unit showing its hotshoe for mounting onto a camera.

4.3 Power On/Off

• To power on, slide the Power Switch to the 'ON' position. The flash will begin charging, and the red flash ready indicator will light up when ready.
• Pou etenn li, glise switch pouvwa a nan pozisyon 'OFF'.

5. Operasyon Modes

The TT350N offers various flash modes to suit different shooting scenarios. Press the MÒD bouton pou chanje mòd ki disponib yo.

5.1 Mòd flach otomatik TTL

In TTL mode, the flash output is automatically adjusted by the camera to achieve correct exposure. This mode is ideal for quick shooting and changing light conditions.

• Peze a MÒD button until 'TTL' is displayed on the LCD panel.
• The flash will automatically adjust its output based on the camera's metering.

5.2 Mòd Flash Manyèl (M)

Manual mode allows you to set the flash output power manually from 1/1 (full power) to 1/128 in 1/3 stop increments. This provides precise control over lighting.

• Peze a MÒD button until 'M' is displayed.
• Vire a Chwazi Dial pou ajiste puisans flash la.

5.3 Multi Flash Mode (Multi)

Multi flash mode (stroboscopic flash) fires a series of rapid flashes during a single exposure, creating multiple images of a moving subject in one frame.

• Peze a MÒD bouton an jiskaske 'Multi' parèt.
• Sèvi ak la Chwazi Dial epi SET button to adjust the flash frequency (Hz), number of flashes, and flash output.

5.4 Senkronizasyon gwo vitès (HSS)

High-Speed Sync allows the flash to synchronize with all camera shutter speeds, up to 1/8000s. This is useful for shooting with wide apertures in bright conditions or freezing fast motion.

• Peze a SYNC button to activate HSS. The HSS icon will appear on the LCD.

5.5 First/Second Curtain Sync

First curtain sync fires the flash at the beginning of the exposure. Second curtain sync fires the flash just before the shutter closes, creating a trail of light behind moving subjects.

• These settings are typically controlled via your camera's flash menu. Refer to your camera's manual for specific instructions.

5.6 Konpansasyon Ekspozisyon Flash (FEC)

FEC pèmèt ou ajiste pwodiksyon flash la nan mòd TTL, pou fè flash la pi klere oswa pi fonse jiska ±3 arè nan ogmantasyon 1/3 arè.

• Nan mòd TTL, peze bouton an SET button. The FEC value will blink.
• Vire a Chwazi Dial to adjust the FEC value.
• Peze a SET bouton ankò pou konfime.

5.7 Modeling Flash

The modeling flash fires a brief burst of light to help you preview efè ekleraj la anvan ou pran foto a menm.

• Press the camera's depth-of-field preview button (if available) to activate the modeling flash.

6. Wireless Flash Function

The TT350N supports both 2.4G wireless transmission and optical transmission for off-camera flash control.

6.1 2.4G Wireless Transmission (Master/Slave)

The built-in Godox 2.4G wireless X system allows the TT350N to function as a master or slave unit, controlling or being controlled by other compatible Godox flashes and triggers.

Image: Illustration of the TT350N operating as both a master and slave unit within the Godox 2.4G wireless system.

• Inite Mèt: The TT350N can control other Godox slave units such as AD600, AD600M, AD360II-C, AD360II-N, V860IIN, V850II, TT685N, and TT600.
• Inite Esklav: The TT350N can be controlled by Godox master units like X1T-N, V860IIN, V850II, TT685N, and TT600.
• To activate wireless mode, long press the GR/CH button (Wireless Selection Button) for 2 seconds.
• Sèvi ak la GR/CH bouton ak Chwazi Dial to set the group (A, B, C) and channel (1-16).
• Ensure all units are set to the same channel and group for proper communication.

6.2 Optical Transmission (S1/S2 Slave)

The TT350N can also function as an optical slave, triggered by another flash unit's light pulse.

• S1 mòd: The flash will fire in response to the first flash from a master flash. This mode is suitable for manual flash environments.
• S2 mòd: The flash will ignore the pre-flash from a master TTL flash and fire in response to the second flash. This mode is suitable for TTL master flashes.
• To activate S1 or S2 mode, press the Esklav button (S1/S2 Optic Slave Triggering Selection Button) until 'S1' or 'S2' is displayed.

7. C.Fn Custom Functions

The TT350N features customizable functions (C.Fn) that allow you to tailor the flash's behavior to your preferences.

• Long peze la C.Fn button for 2 seconds to enter the custom function settings menu.
• Sèvi ak la Chwazi Dial to navigate through the available functions.
• Peze a SET button to select a function and then use the Chwazi Dial pou chanje valè li.
• Peze a SET button again to confirm the change.
• Long peze la C.Fn button again to exit the custom function settings.

8. Antretyen

• Clean the flash unit regularly with a soft, dry cloth. Avoid using solvents or harsh chemicals.
• Remove batteries when the flash is not in use for an extended period to prevent leakage.
• Sere flach la nan yon kote ki fre epi sèk, lwen limyè solèy dirèk ak tanperati ekstrèm.
• Evite gwo enpak oswa lage aparèy la.

NAN. Depanaj

• Flash la pa tire: Check battery level, ensure flash is securely mounted, verify camera flash settings, and confirm flash is powered on and ready.
• Flash output is too dark/bright: Adjust FEC (Flash Exposure Compensation) in TTL mode or manual power output in M mode. Check camera ISO and aperture settings.
• Pwoblèm deklanchman san fil: Ensure master and slave units are on the same channel and group. Check distance and line of sight for optical triggering. Verify battery levels in all units.
• Flash head does not rotate/tilt smoothly: Do not force movement. If resistance is felt, check for obstructions or contact customer support.

10. Espesifikasyon

11. Garanti ak sipò

Godox products are manufactured to high standards and are guaranteed against manufacturing defects. For warranty information, technical support, or service inquiries, please refer to the warranty card included in your package or visit the official Godox websit la. Tanpri konsève prèv acha ou a pou reklamasyon garanti.