uxcell Synchronous Motor (2.5-3RPM) Instruction Manual

1. Pwodwi souview

This manual provides detailed instructions for the uxcell AC 100-127V Synchronous Motor, designed for various applications requiring stable, low-speed rotation. This motor operates at 2.5-3 Revolutions Per Minute (RPM) with a power consumption of 4W and supports both Clockwise (CW) and Counter-Clockwise (CCW) rotation. Its compact size and robust design make it suitable for a range of electrical apparatus and DIY projects.

Typical applications include: heater machines, electric fans, Christmas tree rotators, air conditioners, arts & crafts lighting, and popcorn machines.

2. Espesifikasyon

3. Enfòmasyon sou Sekirite

Before installation or operation, please read and understand all safety warnings. Failure to do so may result in electric shock, fire, or serious injury.

• Dekonekte pouvwa: Toujou asire w ke ekipman pou kouran an dekonekte anvan ou fè nenpòt enstalasyon, antretyen oswa depanaj.
• Pèsonèl ki kalifye: Installation and wiring should only be performed by qualified personnel familiar with electrical systems.
• Bon Voltage: Asire rezèv la voltage matches the motor's rated voltage (AC 100-127V).
• Montaj sekirite: Mount the motor securely to prevent vibration and ensure stable operation.
• Evite Surcharge: Do not exceed the motor's rated torque (8 kgf.cm) or power (4W) to prevent damage.
• Kondisyon anviwònman: Operate the motor within appropriate temperature and humidity ranges. Avoid exposure to excessive dust or moisture.

4. Enstalasyon ak Enstalasyon

Follow these steps for proper installation of your synchronous motor:

1. Prepare Sifas Montage: Identify a stable and flat surface for mounting the motor. Ensure there is adequate space for the motor body and shaft.
2. Monte motè a: Use appropriate screws or bolts to secure the motor through its mounting holes. Ensure the motor is firmly attached to prevent movement during operation. Refer to the product dimensions for precise fitting.

Imaj 1: Anlè view of the uxcell synchronous motor, showing the mounting holes and the label with specifications.
3. Konekte fil elektrik: The motor comes with two wires (40cm/15.7 inch length). Connect these wires to your AC 100-127V power supply. This motor supports both CW and CCW rotation, which is determined by the internal design and not by wiring polarity for AC motors.


Imaj 2: Dèyè view of the uxcell synchronous motor, highlighting the wiring connection point.

4. Attach Load to Shaft: Securely attach the intended load (e.g., turntable, fan blade) to the D-shaped shaft. Ensure the load is balanced and does not cause excessive strain on the motor. The shaft dimensions are 7mm/0.28 inch diameter and 15mm/0.59 inch length.


Image 3: Detailed diagram showing the dimensions of the uxcell synchronous motor, including body diameter, height, and shaft measurements.

5. Operasyon tès: After installation, apply power and observe the motor's operation. Ensure smooth rotation and verify that the connected load functions as expected.

5. Operasyon Enstriksyon

The uxcell synchronous motor is designed for continuous and stable operation at its rated speed of 2.5-3 RPM. Key operational characteristics include:

• Vitès konstan: At the rated frequency (50-60Hz), the motor speed remains stable and is not affected by voltage fluctuations within the specified range.
• Bidirectional Rotation (CW/CCW): This motor is designed to rotate in both clockwise and counter-clockwise directions. The direction of rotation is typically determined by the initial startup phase and can alternate.
• Pwoteksyon Surcharge: The motor coil is designed to withstand overload or stalled conditions without immediate damage, providing a degree of protection for the motor. However, prolonged overload should be avoided.
• Ba bri: The motor operates with low noise levels, making it suitable for applications where quiet operation is desired.

Simply apply the specified AC voltage (100-127V) to the motor's leads to initiate operation. Disconnect power to stop the motor.

6. Antretyen

To ensure the longevity and optimal performance of your uxcell synchronous motor, follow these maintenance guidelines:

• Enspeksyon regilye: Periodically inspect the motor for any signs of wear, damage, or loose connections. Check the shaft for any obstructions.
• Netwayaj: Keep the motor free from dust, dirt, and debris. Use a soft, dry cloth to wipe the exterior. Avoid using liquids or abrasive cleaners.
• Vantilasyon: Ensure the motor has adequate ventilation to prevent overheating. Do not block any vents if present.
• Lubrifikasyon: This motor is typically maintenance-free and does not require external lubrication. Do not attempt to lubricate internal components unless specifically instructed by the manufacturer.
• Entegrite fil elektrik: Check the wiring for fraying, cuts, or loose terminals. Repair or replace damaged wiring immediately.

NAN. Depanaj

If you encounter issues with your synchronous motor, refer to the following troubleshooting guide:

If troubleshooting steps do not resolve the issue, contact uxcell customer support for further assistance.

8. Garanti ak sipò

For warranty information and customer support regarding your uxcell Synchronous Motor, please refer to the purchase documentation or contact uxcell directly through their official websit oswa revandè kote yo te achte pwodwi a.

Lè w ap kontakte sipò a, tanpri bay enfòmasyon sa yo:

• Nimewo modèl pwodwi: a19082100ux0933
• Dat Achte
• Deskripsyon pwoblèm nan

For more information about uxcell products, visit the uxcell Store on Amazon.