Mount-It! Advanced Tilt TV Wall Mount

Pwodwi souview

The Mount-It! Advanced Tilt TV Wall Mount (Model MI-382) is designed to securely hold flat-panel televisions ranging from 37 to 80 inches, with a maximum weight capacity of 154 pounds. This mount offers enhanced flexibility with tool-less tilt adjustment, swivel capabilities, and an extendable design for optimal viewing angles and easy cable access. It is compatible with VESA mounting patterns up to 600x400mm.

Enfòmasyon sou Sekirite

AVÈTISMAN: Failure to read and follow these instructions may result in serious personal injury, property damage, or voiding of your warranty. If you do not understand these instructions or have doubts about the safety of the installation, please contact customer service.

• Kapasite pwa: Do not exceed the maximum weight capacity of 154 lbs (70 kg). This mount is intended for use only with the maximum weights indicated. Use with products heavier than the maximum weights indicated may result in instability causing possible injury.
• Gwosè ekran: Compatible with TVs from 37 to 80 inches.
• VESA konpatibilite: Ensure your TV's VESA pattern (mounting hole spacing) is within the range of 200x200mm to 600x400mm.
• Kalite miray: This mount is designed for installation on solid concrete walls, brick walls, or wood stud walls. Do not install on drywall alone.
• Enstalasyon pwofesyonèl: If unsure about the installation process, consult a qualified professional.

Lis Pati

Verify all components are present before beginning installation. If any parts are missing or damaged, contact Mount-It! customer service.

• Asanble Plak Miray la
• Parantèz televizyon (2)
• Mounting Hardware (various screws, washers, spacers for TV and wall)
• Nivo jarèt
• Quick-Release Cords
• Allen Wrench for adjustments

Enstalasyon ak Enstalasyon

Swiv etap sa yo ak anpil atansyon pou yon enstalasyon an sekirite. Li rekòmande pou gen de moun pou monte televizyon an.

1. Prepare televizyon an:
   Attach the TV brackets to the back of your television using the appropriate screws, washers, and spacers from the provided hardware kit. Ensure the brackets are securely fastened and aligned with your TV's VESA mounting holes.
2. Jwenn pozisyon montaj la:
   Determine the desired height and center position for your TV. Use a stud finder to locate wood studs if mounting on a wood stud wall. Mark the drilling locations for the wall plate.
3. Enstale Plak Mi:
   Drill pilot holes at the marked locations. Secure the wall plate assembly to the wall using the provided lag bolts and washers. Ensure the wall plate is level using the included bubble level. The open design of the wall plate allows for mounting over cable inlets and power outlets.
   

   Figure 1: Key features of the Mount-It! Advanced Tilt TV Wall Mount, including the built-in bubble level and open wall plate design.
4. Pandye televizyon an:
   Carefully lift the TV with the attached brackets and hook them onto the wall plate. The spring lock mechanism will secure the TV in place. Pull the quick-release cords to ensure the TV is properly seated and locked.
   

   Video 1: Official Mount-It! video demonstrating the installation and features of the Advanced Tilt TV Wall Mount.

5. Mete televizyon an an sekirite:
   For added security, a padlock (not included) can be used with the padlock-compatible feature on the TV brackets to prevent accidental removal or theft.

Enstriksyon Operasyon

This mount offers various adjustments for optimal viewing and convenience.

• Extension and Swivel: The mount extends up to 5.3 inches from the wall and allows for a 5-degree swivel both left and right. Gently pull the TV forward to extend it, then adjust the swivel angle as needed.
  

  Figure 2: The mount extends and swivels to provide easy access to cables and ports.

• Ajisteman enklinezon: The mount features a tool-less tilt adjustment, allowing for 5 degrees upward tilt and 12 degrees downward tilt. Use the tilt adjustment knob on the TV brackets to achieve your desired viewing angle and reduce glare.
  

  Figure 3: The mount allows for easy tilt adjustment to optimize viewing.

• Micro-Level Adjustment: After installation, use the micro-level adjustment feature to ensure your screen is perfectly straight. This can be done with an Allen wrench (included).
  

  Figure 4: Adjusting the micro-level to ensure the TV is perfectly horizontal.
• Quick-Release Cords: To remove the TV from the wall mount, pull down on the quick-release cords located at the bottom of the TV brackets. This disengages the locking mechanism, allowing the TV to be lifted off the wall plate. After installation, tuck these cords in for a clean appearance.

Antretyen

Antretyen regilye asire lonjevite ak fonksyònman an sekirite nan sipò televizyon ou an.

• Netwayaj: Siye montur la avèk yon twal mou epi sèk. Evite pwodui netwayaj abrazif oswa solvan ki ka domaje fini an.
• Tcheke Koneksyon: Periodically check all screws and bolts to ensure they are tight and secure. Over time, vibrations or movement may cause fasteners to loosen.
• Lubrifikasyon: If movement becomes stiff, a small amount of silicone-based lubricant can be applied to the moving joints.

Depanaj

Si ou rankontre pwoblèm pandan oswa apre enstalasyon an, gade pwoblèm ak solisyon komen sa yo.

• Televizyon an pa nivo: Use the micro-level adjustment feature on the TV brackets to fine-tune the horizontal alignment. Ensure the wall plate was installed level initially.
• Difficulty adjusting tilt/swivel: Check if the tilt adjustment knob is loose enough to allow movement. Ensure no cables are obstructing the movement of the mount.
• TV feels wobbly: Re-check all wall plate and TV bracket connections to ensure they are securely tightened. Verify that the wall studs or concrete are capable of supporting the TV's weight.
• Cables are difficult to access: Utilize the extension feature of the mount by gently pulling the TV away from the wall. This provides more space to connect or disconnect cables.

Espesifikasyon

Garanti ak sipò

The Mount-It! Advanced Tilt TV Wall Mount is backed by a LIFETIME warranty. Our US-based customer service team is available to assist you during standard business hours for any questions or support needs.

For assistance, please visit the Mount-It! website or contact our customer support directly.