Manyèl Itilizatè WAVLINK AC600 pou Ekstansyon WiFi Deyò

1. Entwodiksyon

This manual provides detailed instructions for the installation, configuration, and operation of your WAVLINK AC600 Outdoor WiFi Extender. This device is designed to extend your existing wireless network coverage, providing stable and high-speed internet access in outdoor environments. Please read this manual thoroughly before using the product to ensure proper setup and optimal performance.

2. Enfòmasyon sou Sekirite

• Pa ekspoze aparèy la nan tanperati ekstrèm, imidite, oswa limyè solèy la dirèk.
• Asire w adaptè kouran an konpatib ak ekipman pou kouran lokal ou a.
• Evite mete aparèy la toupre chan mayetik ki fò.
• Pa eseye demonte oswa repare aparèy la tèt ou. Kontakte pèsonèl kalifye pou sèvis.
• Sèvi ak sèlman akseswa espesifye pa manifakti a.

3. Pake kontni

Verifye ke tout atik yo prezan nan pakè ou a:

• WAVLINK AC600 Outdoor WiFi Extender
• Omni-directional Antennas (2)
• PoE konvètè
• Adaptè pouvwa
• Kab rezo RJ45
• Espageti/Akseswa pou Monte
• Gid Enstalasyon Rapid
• Kat Garanti

Image: Contents of the WAVLINK AC600 Outdoor WiFi Extender package.

4. Pwodwi souview

Familiarize yourself with the device's ports and indicators.

Imaj: Anba view of the WAVLINK AC600 Extender, highlighting the WAN/LAN port, Reset button, and Ground (GND) connection.

4.1 Pò ak bouton

• Pò WAN/LAN: Itilize pou konekte ak routeur/modèm ou oswa lòt aparèy rezo. Sipòte Power over Ethernet (PoE).
• Bouton Reyajiste: Press and hold for 8 seconds to restore the device to factory default settings.
• GND (Ground) Terminal: For grounding the device to protect against electrical surges.

4.2 Endikatè ki ap dirije

• Pouvwa dirije: Endike estati pouvwa.
• LED WAN/LAN: Indicates network activity on the WAN/LAN port.
• LED WiFi: Endike aktivite rezo san fil la.
• LED fòs siyal: Endike fòs siyal san fil la.

5. Enstalasyon

5.1 Enstalasyon Fizik

The WAVLINK AC600 is designed for outdoor use and can be mounted on a pole or wall.

1. Attach the two omni-directional antennas to the designated connectors on the device.
2. Securely mount the device in your desired outdoor location using the provided mounting straps or hardware. Ensure it has a clear line of sight to the area requiring WiFi coverage.
3. Connect an Ethernet cable from the device's WAN/LAN port to the PoE converter's PoE port.
4. Connect another Ethernet cable from the PoE converter's LAN port to your router or network switch.
5. Konekte adaptè kouran an nan konvètisè PoE a epi branche li nan yon priz kouran.

Image: The WAVLINK AC600 Extender installed outdoors, operating effectively even during rainfall.

Image: The WAVLINK AC600 Extender mounted on a pole in an outdoor garden, providing extended WiFi coverage.

Image: The WAVLINK AC600 Extender mounted on a metal railing, illustrating its versatile installation capabilities.

5.2 Inisyal Konfigirasyon

After physical installation, configure the device via a web navigatè.

1. Connect your computer to the PoE converter's LAN port using an Ethernet cable, or connect wirelessly to the extender's default WiFi network (SSID and password usually found on a label on the device or in the Quick Installation Guide).
2. Louvri a web navigatè epi antre adrès IP default la (egzanp, http://192.168.10.1) or the default domain name (e.g., http://ap.setup) nan ba adrès la.
3. Enter the default username and password (usually 'admin' for both).
4. Follow the on-screen setup wizard to select your desired operating mode (AP/Router, Repeater, or WISP) and configure network settings.

6. Operasyon Modes

WAVLINK AC600 la sipòte plizyè mòd fonksyònman pou satisfè divès kondisyon rezo a.

Image: Diagram showing the three main operating modes: AP/Router Mode, Repeater Mode, and AP+Repeater Mode.

6.1 Mòd AP/Routeur

In this mode, the device acts as a primary router or an access point, creating a new wireless network.

• Mòd Routeur: Connects to a modem via the WAN/LAN port and provides internet access to connected devices, acting as a DHCP server.
• Mode Pwen Aksè (AP): Connects to an existing wired router via the WAN/LAN port and extends the wired network wirelessly. It does not perform NAT or DHCP.

6.2 Repeater Mode

The device wirelessly connects to an existing WiFi network and re-broadcasts it, extending its coverage. This mode is ideal for eliminating WiFi dead zones.

• Select the Repeater mode during setup.
• Scan for available WiFi networks and select the one you wish to extend.
• Antre modpas la pou rezo chwazi a.
• The extender will then broadcast the extended network, often with a suffix like '_EXT'.

6.3 WISP Mode (Wireless Internet Service Provider)

In WISP mode, the device acts as a client to an existing wireless network (e.g., a public hotspot) and shares that internet connection with local wired and wireless clients, functioning as a router.

• Select WISP mode during setup.
• Scan for the wireless network you want to connect to as a client.
• Configure the local network settings for your devices.

7. Antretyen

7.1 Mizajou mikrolojisyèl

Periodically check the WAVLINK official website for firmware updates. Firmware updates can improve performance, add new features, and fix bugs.

1. Telechaje dènye firmwèr la file for your model from the WAVLINK support page.
2. Log in to the device's web koòdone jesyon.
3. Navigate to the 'System Tools' or 'Firmware Upgrade' section.
4. Telechaje firmwèr telechaje a file and follow the on-screen instructions. Do not power off the device during the upgrade process.

7.2 Netwayaj

Siye aparèy la avèk yon twal mou epi sèk. Pa sèvi ak pwodui netwayaj likid oswa ayewosòl.

NAN. Depanaj

• Pa gen pouvwa: Ensure the power adapter is securely connected to the PoE converter and a working power outlet. Check the Power LED.
• Pa Ka Aksè Web Paj Jesyon: Verify your computer's IP address is in the same subnet as the extender (e.g., 192.168.10.x). Try clearing your browser's cache or using a different browser. Ensure the Ethernet cable is properly connected.
• Pòv fòs siyal: Relocate the extender to a position with better line of sight to your main router. Adjust antenna orientation. Check for obstructions like thick walls or metal objects.
• Vitès koneksyon dousman: Ensure the extender is placed within optimal range of the main router. Check for interference from other wireless devices. Update firmware.
• Bliye modpas koneksyon an: Perform a factory reset by pressing and holding the Reset button for 8 seconds. This will revert all settings to default.

9. Espesifikasyon

10. Garanti ak sipò

Pwodwi WAVLINK yo vini ak yon garanti limite. Tanpri gade kat garanti ki enkli nan pake a pou tèm ak kondisyon espesifik yo. Pou sipò teknik, mizajou firmwèr, oswa plis asistans, tanpri vizite sit ofisyèl WAVLINK la. websit oswa kontakte sèvis kliyan yo.

WAVLINK Ofisyèl Websit: www.wavlink.com