CATA CI 712 Brass Glass 3 Burner Gas Stove User Manual

1. Enfòmasyon enpòtan sou sekirite

Please read all instructions carefully before using your CATA CI 712 gas stove. Keep this manual for future reference. Failure to follow these instructions could result in fire, explosion, electric shock, or other hazards, causing property damage, personal injury, or death.

• Sekirite gaz: Ensure proper ventilation. Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. If you smell gas, follow the instructions provided by your gas supplier.
• Sekirite elektrik: This appliance uses automatic electric ignition. Ensure the electrical supply is properly grounded and meets local codes. Do not operate the appliance with a damaged cord or plug.
• Danje boule: The cooking surface and surrounding areas can become hot during use. Use oven mitts or pot holders. Do not touch hot surfaces.
• Sekirite timoun yo: Keep children away from the appliance during operation. Never allow children to operate the gas stove.
• Enstalasyon: Enstalasyon an dwe fèt pa yon teknisyen kalifye, dapre tout kòd ak règleman lokal yo.

2. Pwodwi souview

The CATA CI 712 is a 3-burner gas stove designed for efficient and reliable cooking. It features a durable tempered glass surface, robust brass burners, and convenient automatic electric ignition.

Figi 2.1: Konplè view of the CATA CI 712 Brass Glass 3 Burner Gas Stove.

2.1 Eleman

• Sifas vè apeze: Provides a sleek look and is easy to clean.
• Brass Burners: Includes two large brass burners and one small brass burner for versatile cooking.
• Enameled Grates: Sturdy grates to support cookware.
• Bouton kontwòl: Three metallic rotary knobs for precise flame control and automatic ignition.
• Automatic Electric Ignition: For convenient and instant lighting of burners.

Figi 2.2: Close-up view of a brass burner and enameled grate.

Figure 2.3: Detail of the metallic control knobs on the glass surface.

3. Enstalasyon ak Enstalasyon

The CATA CI 712 gas stove is designed as a freestanding cooktop but can also be used as a built-in hob. Professional installation is highly recommended to ensure safety and proper functionality.

3.1 Debake

1. Retire aparèy la nan anbalaj li avèk prekosyon.
2. Inspect for any damage during transit. Do not install if damaged.
3. Asire w ke tout konpozan ki nan lis anbalaj la prezan.

3.2 Plasman

• Place the stove on a stable, level, and heat-resistant surface.
• Asire w ke gen yon distans ase lwen materyèl ki ka pran dife.
• If using as a built-in hob, the cutout width should be approximately 70.5 cm.

3.3 Koneksyon gaz

Connect the gas supply line to the appliance inlet. Use appropriate gas-rated connectors and ensure all connections are leak-free. A qualified gas technician must perform this step.

3.4 Koneksyon elektrik

Plug the appliance into a properly grounded electrical outlet. This connection powers the automatic electric ignition system. Ensure the voltage ak frekans lan koresponn ak egzijans aparèy la.

4. Operasyon Enstriksyon

Your CATA CI 712 gas stove features easy-to-use metallic knobs for controlling the burners and automatic ignition.

4.1 Lighting a Burner

1. Place your cookware on the desired burner grate.
2. Push down the corresponding control knob and rotate it counter-clockwise to the 'High' flame position. You will hear a clicking sound as the automatic igniter sparks.
3. Once the burner lights, continue to hold the knob down for a few seconds to allow the thermocouple (if present) to heat up and ensure the flame remains lit.
4. Lage bouton an. Si flanm dife a etenn, repete etap 2-3 yo.

4.2 Adjusting the Flame

After the burner is lit, you can adjust the flame intensity by rotating the control knob between the 'High' and 'Low' positions. The knobs rotate 360 degrees for precise flame adjustment.

4.3 Etenn yon brûleur

To turn off a burner, rotate the control knob clockwise until it clicks into the 'Off' position.

5. Antretyen ak netwayaj

Regular cleaning and maintenance will ensure the longevity and optimal performance of your gas stove.

5.1 Netwayaj chak jou

• Kite recho a refwadi nèt anvan ou netwaye li.
• Wipe the tempered glass surface with a soft cloth and a mild detergent or glass cleaner. Avoid abrasive cleaners that can scratch the glass.
• Remove spills immediately to prevent staining.

5.2 Burner and Grate Cleaning

• Remove the enameled grates and burner caps/rings. These can be washed with warm soapy water. For stubborn stains, a non-abrasive scrub pad can be used.
• Asire w tout pati brûler yo byen sèk anvan ou rasanble yo pou evite pwoblèm ignisyon.
• Clean the burner ports with a small brush or needle to ensure unobstructed gas flow.

5.3 bouton kontwòl

The metallic control knobs can be pulled off for cleaning. Wash them with warm soapy water and dry thoroughly before reattaching.

NAN. Depanaj

If you encounter issues with your CATA CI 712 gas stove, refer to the following common troubleshooting steps:

• Burner not lighting:
  • Check if the gas supply is turned on.
  • Ensure the appliance is plugged in and there is power to the outlet for the electric ignition.
  • Verify that the burner caps and rings are correctly seated and clean.
  • Hold the knob down for a few extra seconds after ignition.
• Uneven flame:
  • Clean the burner ports to remove any food debris or blockages.
  • Ensure the burner caps are correctly positioned.
• Sant gaz:
  • Immediately turn off all burners and the main gas supply.
  • Louvri fenèt pou vantilasyon.
  • Pa opere okenn switch elektrik oswa aparèy.
  • Contact your gas supplier or a qualified technician immediately.

Pou pwoblèm ou pa rezoud ak etap sa yo, tanpri kontakte sèvis kliyan.

7. Espesifikasyon

8. Garanti ak sipò

Your CATA CI 712 Brass Glass 3 Burner Gas Stove comes with a comprehensive warranty:

• 2 ane garanti: From the date of purchase on Micro switch, Spark Plug, Generator, and Jets.
• 5 ane garanti: From the date of purchase on Glass and Valves.
• Eksklizyon: No warranty on Sabaf Lotus/Enameled Black burners for discoloration, denting, deformation, or chipping/peeling of enameled black coating.

Please retain your purchase receipt and the included warranty card for any warranty claims. For technical support, service, or to inquire about parts, please contact CATA customer service.

Figure 8.1: CATA brand logo.