S18AW3FF50 EZ-Beam S18 Series Photoelectric Sensor User Manual

1. Entwodiksyon

This manual provides essential information for the installation, operation, and maintenance of the BANNER ENGINEERING S18AW3FF50 EZ-Beam S18 Series Photoelectric Sensor. This sensor is designed for reliable object detection in industrial environments, featuring a 50 mm range, 20-250VAC input, and SPST solid-state light operate output.

Figure 1: BANNER ENGINEERING S18AW3FF50 Photoelectric Sensor with coiled cable.

2. Enstalasyon ak Enstalasyon

Proper installation is crucial for optimal performance and safety. Follow these steps carefully.

2.1 Debalaj ak enspeksyon

• Carefully remove the sensor from its packaging.
• Inspect the sensor for any visible damage that may have occurred during shipping.
• Verifye ke tout konpozan ki nan lis nan fich anbalaj la prezan.

2.2 Monte Capteur a

The S18AW3FF50 sensor is designed for easy mounting. Ensure the mounting surface is stable and free from excessive vibration.

1. Select a mounting location that provides clear line-of-sight for the sensor's detection range (50 mm).
2. Secure the sensor using appropriate mounting hardware (not included). The sensor features a threaded barrel for secure attachment.
3. Ensure the sensor is oriented correctly for the intended detection application.

Figi 2: Side view of the S18AW3FF50 sensor, showing the threaded barrel and cable.

2.3 Koneksyon elektrik

AVÈTISMAN: Disconnect all power before making electrical connections to prevent electric shock or damage to the equipment.

The S18AW3FF50 operates on 20-250VAC input and provides an SPST Solid-State Light Operate output. The sensor comes with a 2M (6.5FT) cable.

Connect the sensor wires to the control circuit according to the provided wiring diagram and local electrical codes. Ensure all connections are secure.

Figure 3: S18AW3FF50 sensor showing the cable with exposed wires for electrical connection.

3. Operasyon

Once installed and wired, the S18AW3FF50 sensor is ready for operation.

3.1 Limen

Apply power to the sensor (20-250VAC). The sensor will typically have an indicator LED (if present) to show power status and output state.

3.2 Detection Principle

The S18AW3FF50 is a photoelectric sensor operating in a fixed field mode. It emits a light beam and detects objects based on the reflection or interruption of this beam. The "Light Operate" output means the output will be active when light is received by the sensor (i.e., when an object is detected or not detected, depending on the specific fixed field configuration).

3.3 Ranje ak Pèfòmans

The sensor has a specified detection range of 50 mm. Ensure that objects to be detected fall within this range for reliable operation. Environmental factors such as dust, moisture, and ambient light can affect performance.

4. Antretyen

The S18AW3FF50 sensor is designed for low maintenance. Regular checks can ensure long-term reliable operation.

4.1 Netwayaj

• Periodically clean the sensor lens and housing to remove dust, dirt, or debris that may accumulate and interfere with detection.
• Use a soft, lint-free cloth and a mild cleaning solution if necessary. Avoid abrasive cleaners or solvents.

4.2 Enspeksyon Kab ak Koneksyon

• Regularly inspect the sensor cable for any signs of wear, cuts, or damage.
• Check electrical connections to ensure they remain secure and free from corrosion.

NAN. Depanaj

This section provides solutions to common issues encountered with the S18AW3FF50 sensor.

6. Espesifikasyon

Key technical specifications for the BANNER ENGINEERING S18AW3FF50 Photoelectric Sensor.

• Modèl: S18AW3FF50
• Seri: EZ-Beam S18 Series
• Ranje deteksyon: 50 mm
• Antre Voltage: 20-250VAC
• Kalite Sòti: SPST Solid-State Light Operate
• Longè kab: 2M (6.5FT)
• Kalite Capteur: Photoelectric, Fixed Field
• Manifakti: BANNER ENGINEERING
• ASIN: B07RZTBRLS
• Dat premye disponib: 3 desanm 2021

7. Garanti ak sipò

For warranty information and technical support, please contact BANNER ENGINEERING directly or refer to their official websit.

Règleman retounen: The product may be subject to a return policy of 30 days for refund/replacement, as per the seller's terms.

Manifakti: BANNER ENGINEERING

Pou plis asistans, vizite BANNER ENGINEERING official websit.