Hama 00186357 Electronic Environment Thermometer

Entwodiksyon

This manual provides essential instructions for the safe and efficient use of your Hama 00186357 Electronic Environment Thermometer. Please read these instructions carefully before first use and keep them for future reference. This device is designed for indoor temperature measurement and features an LCD display and an alarm function.

Enfòmasyon sou Sekirite

Observe the following safety instructions to prevent injury or damage to the device:

• Pa ekspoze aparèy la nan tanperati ekstrèm, limyè solèy dirèk, oswa imidite ki wo.
• Avoid dropping the device or subjecting it to strong impacts, as this may cause it to reset or malfunction.
• Keep batteries out of reach of children. Swallowing batteries can be fatal.
• Replace batteries correctly, observing polarity (+/-). Incorrect insertion can cause damage.
• Pa demonte aparèy la. Se sèlman pèsonèl kalifye ki dwe fè reparasyon yo.

For detailed safety information, please refer to the official Safety Information document: Enfòmasyon sou Sekirite (PDF).

Kontni pake

Tanpri verifye ke tout atik yo enkli nan pakè a:

• 1x Hama 00186357 Electronic Environment Thermometer
• 2x LR1130 Button Cell Batteries (pre-installed or included separately)
• 1x Manyèl Enstriksyon (dokiman sa a)

Enstalasyon

Enstalasyon batri

The Hama 00186357 thermometer operates on two LR1130 button cell batteries. These are typically included with your purchase.

1. Jwenn lòj batri a sou do aparèy la.
2. Carefully open the battery compartment cover. You may need a small screwdriver or coin to gently pry it open.
3. Insert the two LR1130 button cell batteries, ensuring the correct polarity (+ and - symbols) matches the markings inside the compartment.
4. Fèmen kouvèti lòj batri a byen.

Imaj: Dèyè view of the Hama 00186357 thermometer, highlighting the battery compartment for installation.

Premye pouvwa sou

Once batteries are installed, the device should automatically power on and display the current time and temperature. If the display remains blank, check battery installation or replace with new batteries.

Enstriksyon Operasyon

Lekti ekspozisyon an

The LCD screen displays the current indoor temperature, time, and day of the week. The temperature is typically shown in Celsius. The device has a digital display for clear readability.

Imaj: Devan view of the Hama 00186357 thermometer, displaying temperature, time, and day on its LCD screen.

Mete Tan ak Alam

The thermometer includes an alarm function. Specific button functions may vary slightly, but generally follow these steps:

1. bouton mòd: Press the 'MODE' button (if present) to cycle through display modes: Time, Alarm, Date.
2. Mete tan: When in Time mode, press and hold the 'SET' or 'ADJ' button until the time digits begin to flash. Use the 'UP' or 'DOWN' buttons to adjust hours and minutes. Press 'SET' again to confirm each setting.
3. Mete alam: Switch to Alarm mode using the 'MODE' button. Press and hold 'SET' or 'ADJ' to set the alarm time. Use 'UP' or 'DOWN' to adjust.
4. Aktive Alam: Look for an alarm icon or a dedicated 'ALARM ON/OFF' button to activate or deactivate the alarm.

Antretyen

Ranplasman batri

When the display becomes dim or the device stops functioning, it is time to replace the batteries. Follow the battery installation steps outlined in the 'Setup' section. Always use two new LR1130 button cell batteries.

Netwayaj

To clean the device, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the device in water. This product is made of plastic and should be handled with care.

Depanaj

• Ekran an vid oswa li pa klere byen:
  Check if batteries are correctly installed. Replace with new LR1130 batteries.
• Lekti tanperati ki pa kòrèk:
  Ensure the device is placed in a stable environment, away from direct heat sources, air conditioning vents, or direct sunlight, which can affect readings. Allow up to 4 minutes for the device to stabilize and provide an accurate reading.
• Device resets unexpectedly:
  The device may be sensitive to strong impacts or drops. If it resets, re-enter time and alarm settings as needed. Ensure the device is placed on a stable surface.
• Alam pa sonnen:
  Verify that the alarm function is activated and the alarm time is correctly set.

Espesifikasyon

Garanti ak sipò

Hama products are manufactured with high-quality materials and undergo strict quality control. In the unlikely event of a defect, please contact your retailer or the Hama customer service department for assistance.

For warranty claims, please retain your proof of purchase. Specific warranty terms and conditions may vary by region. For further support or inquiries, please visit the official Hama websit la oubyen kontakte sèvis kliyan yo dirèkteman.