Globe Electric 67135 72" Floor Lamp with Adjustable Reading Light Instruction Manual

Entwodiksyon

This manual provides comprehensive instructions for the safe assembly, operation, and maintenance of your Globe Electric 67135 72" Floor Lamp with Adjustable Reading Light. Please read this manual thoroughly before installation and use to ensure proper function and safety. Keep this manual for future reference.

Enstriksyon Sekirite Enpòtan

To reduce the risk of fire, electric shock, or injury to persons, please adhere to the following safety guidelines:

• Li tout enstriksyon yo.
• Pa konekte elektrisite a jiskaske l laamp se konplètman reyini.
• Deploge lamp from the power outlet before cleaning or changing bulbs.
• Pa sèvi ak l sa aamp pre dlo oswa nan damp kote yo ye.
• Use only the specified bulb types and wattages pou evite surchof.
• Asire lamp mete l sou yon sifas ki estab e plat pou anpeche l chavire.
• Kenbe fil elektrik la lwen sifas ki chofe.
• Pa opere l laamp ak yon kòd oswa ploge ki domaje.
• Sa a lamp se pou itilize andedan kay la sèlman.

Kontni pake

Carefully unpack all components and inspect for any damage. If any parts are missing or damaged, do not proceed with assembly. Contact customer support for assistance.

• Lamp Baz
• Seksyon poto (plizyè)
• Torchiere Lamp Tèt
• Limyè lekti reglabl
• Torchiere Shade (frosted plastic)
• Reading Light Shade (frosted plastic)
• Fèy Enstriksyon (manyèl sa a)

Imaj: Plis paseview nan l laamp's dimensions and components.

Enstriksyon Asanble

Swiv etap sa yo pou rasanble planche ou a.amp:

1. Prepare baz la: Mete l laamp baz la sou yon sifas plat e ki stab.
2. Rasanble poto a: Carefully thread the power cord through the pole sections. Screw the pole sections together clockwise, starting from the base, ensuring each section is securely tightened. Pull any excess cord from the base as you assemble to prevent slack.
3. Tache Lamp Tèt: Screw the torchiere lamp head onto the top pole section. The adjustable reading light is typically pre-attached to one of the upper pole sections.
4. Enstale lonbraj yo: For both the torchiere and reading light, unscrew the socket ring from the bulb holder. Place the frosted plastic shade over the bulb holder and secure it by screwing the socket ring back into place.
5. Mete anpoul: Refer to the "Bulb Requirements" section for correct bulb types and wattages. Screw the appropriate bulbs into the sockets.
6. Plasman Final: Position the assembled lamp in your desired location, ensuring the cord is not pinched or a tripping hazard.

Image: The fully assembled Globe Electric 67135 floor lamp.

Enstriksyon Operasyon

Once assembled and plugged into a standard 120V outlet, your lamp se pare pou itilize.

Main Torchiere Light

The main torchiere light features a 3-step rotary dimmer switch. Rotate the switch clockwise to cycle through low, medium, and high light settings, and then off. This allows you to adjust the ambient lighting to your preference.

Image: Operating the 3-step rotary dimmer switch.

Limyè lekti reglabl

The adjustable reading light has its own separate on/off switch, typically located on the light head or near its base. The flexible gooseneck allows you to direct the light precisely where needed, making it ideal for reading or task lighting.

Image: The adjustable reading light feature.

Kondisyon pou anpoul

Sa a lamp requires two E26 medium base bulbs (sold separately).

• Main Torchiere Light: 1x E26 Medium Base, maximum 150W bulb.
• Limyè lekti reglabl: 1x E26 Medium Base, maximum 40W bulb.

L laamp is compatible with LED, incandescent, and halogen bulbs. For optimal performance and energy efficiency, LED or incandescent bulbs are recommended.

Imaj: Egzamples of suggested E26 medium base bulbs.

Swen ak Antretyen

Proper care will ensure the longevity and appearance of your lamp.

• Netwayaj: Toujou debranche lamp before cleaning. Use a soft, dry cloth to wipe down the metal and plastic surfaces. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
• Ranplasman anpoul: Asire lamp is unplugged and the bulb has cooled completely before attempting to replace it. Screw in the new bulb firmly but gently.
• Swen kòd: Regularly inspect the power cord for any signs of damage. Avoid bending or twisting the cord excessively.

Depanaj

Si w rankontre nenpòt pwoblèm ak lamp, gade tablo ki anba a pou pwoblèm ak solisyon komen yo:

Espesifikasyon pwodwi

Garanti ak sipò

This product is sold without a manufacturer's warranty. For any questions, concerns, or assistance with your Globe Electric product, please refer to the contact information provided on the product packaging or visit the official Globe Electric websit pou resous sipò kliyan.