ECOELER PIR Motion Sensor Light Switch User Manual

1. Entwodiksyon

This manual provides comprehensive instructions for the installation, operation, and maintenance of your ECOELER PIR Motion Sensor Light Switch. This device is designed to provide convenient, hands-free lighting control by detecting motion and ambient light levels, helping to conserve energy.

Karakteristik kle yo enkli:

• Operasyon men lib: Automatically activates lights upon motion detection.
• Mòd doub: Supports Occupancy (OCC) and Vacancy (VAC) modes for flexible control.
• Anviwònman Customizable: Adjustable time delays, sensitivity, and light level sensing.
• Gwo konpatibilite: Works with 300W LED, 300W CFL, and 600W incandescent light bulbs.
• Sètifye sekirite: UL Certified, FCC Listed, and California Title 24 Compliant.

Image 1.1: ECOELER Motion Sensor Light Switch with UL, FCC, and Title 24 certifications.

2. Enfòmasyon sou Sekirite

AVÈTISMAN: RISK POU CHÒK ELEKTRIK. Improper installation can lead to serious injury or death. Always consult a qualified electrician to ensure proper wiring and installation, especially if you are unfamiliar with electrical work.

• Dekoneksyon pouvwa: ALWAYS turn off power at the circuit breaker or fuse box before installing or servicing the switch.
• Fil net obligatwa: This switch requires a neutral wire for operation. Verify your electrical box has a neutral wire (typically white) before proceeding with installation.
• Itilize andedan kay la sèlman: Ki fèt pou aplikasyon pou andedan kay la.
• Konpatibilite chaj: Pa depase wat maksimòm lantage ratings: 300W LED, 300W CFL, 600W Incandescent.
• Single Pole Only: This switch is designed for single-pole circuits only. It is not suitable for 3-way or multi-way circuits.

3. Pwodwi souview ak Konpozan

The ECOELER Motion Sensor Light Switch integrates a Passive Infrared (PIR) sensor to detect motion and an ambient light sensor to optimize energy usage. The switch features a manual ON/OFF button and adjustable dials for customization.

Eleman ki enkli:

• Motion Sensor Switch (YM2108 Series)
• Plak mi
• Vis Montage (4)
• Terminal Caps (4)
• Manyèl itilizatè

Imaj 3.1: Akseswa ki enkli yo ak dimansyon pwodwi a.

Imaj 3.2: Plis paseview of the PIR Motion Detector, Manual ON/OFF Button, and adjustment dials for Time, Sense, and Light.

4. Enstalasyon ak Enstalasyon

Lis Verifikasyon Pre-Enstalasyon:

• Asire w ke kouran an koupe nan disjonktè a.
• Confirm the presence of a neutral wire in your electrical box.
• Tools required: Screwdriver, wire strippers, electrical tape (optional).

Gid fil elektrik:

Follow these steps carefully. If you are unsure, consult a qualified electrician.

1. Fèmen kouran nan disjoncteurs a.
2. Retire plak miray ki deja egziste a ak switch.
3. Identify the wires in your electrical box: Hot (Black), Load (Red), Neutral (White), and Ground (Green or bare copper).
4. Connect the wires from the ECOELER switch to your house wiring using the provided terminal caps:
• Black wire (Switch) pou Hot wire (Circuit Box)
• Red wire (Switch) pou Load wire (Circuit Box) (connects to light/fan)
• White wire (Switch) pou Neutral wire (Circuit Box) (OBLIGWA)
• Green wire (Switch) pou Ground wire (Circuit Box)
5. Pouse switch filaire a avèk prekosyon nan bwat elektrik la.
6. Secure the switch to the electrical box with the mounting screws.
7. Tache plak miray la.
8. Retabli pouvwa nan disjoncteurs a.

Image 4.1: Detailed wiring diagram for the ECOELER Motion Sensor Light Switch (YM2108 Series).

5. Operasyon Enstriksyon

Your ECOELER Motion Sensor Light Switch offers two primary operating modes and several adjustable settings to customize its performance.

Mòd operasyon:

The mode selector switch is located on the front of the device, typically beneath a small cover or flap.

• OCC (Occupancy) Mode: In this mode, the lights will automatically turn ON when motion is detected and automatically turn OFF when the space is unoccupied for the set time delay. This mode provides full hands-free operation.
• VAC (Vacancy) Mode: In this mode, the lights must be turned ON manually using the manual ON/OFF button. The lights will then automatically turn OFF when no motion is detected for the set time delay. This mode is ideal for rooms where manual control is preferred for turning on, but automatic turn-off is desired for energy saving.

Image 5.1: Mode selection switch for Occupancy (Auto on & off) and Vacancy (Manual on & Auto off).

Anviwònman reglabl:

Three small rotary dials allow you to fine-tune the switch's behavior. These are typically located behind a small cover on the front of the switch.

• TAN (Reta Tan): Adjusts how long the lights remain ON after the last detected motion.
• Range: 15 seconds (TEST) to 30 minutes.
• Setting 'TEST' is for quick testing of motion detection.
• SANS (Sansiblite): Controls the motion detection range.
• Range: Approximately 6.56 ft (20%) to 29.52 ft (100%).
• Adjust as needed to prevent unwanted triggers or ensure adequate coverage.
• LIMYÈ (Nivo Limyè Anbyen): Determines the ambient light threshold at which the sensor will allow the lights to turn ON.
• Range: 1=5lux (very dark) to 5=all day (always allow lights to turn on, regardless of ambient light).
• Setting '5' effectively disables the ambient light sensor, allowing the lights to turn on with motion even in bright conditions.

Image 5.2: Detailed breakdown of adjustable settings for Time, Sense, and Light.

6. Antretyen

The ECOELER Motion Sensor Light Switch requires minimal maintenance to ensure optimal performance.

• Netwayaj: Periodically wipe the sensor lens and switch surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as this can damage the device.
• San obstak: Ensure the sensor's field of view is not obstructed by furniture, curtains, or other objects, as this can affect motion detection.
• Pa gen pati itilizatè ki ka fè sèvis: Do not attempt to open or repair the switch. Refer all servicing to qualified personnel.

NAN. Depanaj

If you experience issues with your motion sensor light switch, try the following troubleshooting steps:

8. Espesifikasyon

9. Enfòmasyon sou Garanti

All ECOELER products come with a 1-ane garanti from the date of purchase. This warranty covers non-man-made damage under normal use. For any warranty claims or replacement solutions, please contact our support team.

10. Sipò

For further assistance, technical support, or to report any issues not covered in this manual, please contact ECOELER customer service. Refer to the product packaging or the ECOELER official websit pou jwenn enfòmasyon kontak aktyèl.