Manyèl Itilizatè Ponp Chalè Pisin POOLEX Silverline 90

1. Entwodiksyon

This user manual provides comprehensive instructions for the safe and efficient operation, installation, and maintenance of your POOLEX Silverline 90 Pool Heat Pump, model PC-SLP090. Please read this manual thoroughly before installation and use to ensure optimal performance and longevity of the unit.

2. Enfòmasyon sou Sekirite

Always adhere to local electrical codes and regulations. Installation must be performed by a qualified professional. Failure to follow these instructions may result in property damage, serious injury, or death.

• Ensure the power supply is disconnected before any maintenance or service.
• Do not operate the heat pump if any part is damaged or missing.
• Kenbe timoun ak bèt kay lwen aparèy la pandan l ap fonksyone.
• Li enpòtan pou byen konekte ak tè a pou anpeche chòk elektrik.
• Pa bloke ouvèti pou antre lè a oswa ouvèti pou sòti lè a.

3. Pwodwi souview ak Konpozan

The POOLEX Silverline 90 is a high-performance heat pump designed for heating swimming pools. It features a Mitsubishi compressor and a double-spiral titanium exchanger for efficient heat transfer.

Figi 3.1: Devan view of the POOLEX Silverline 90 heat pump, showing the main unit with the POOLEX Silverline logo and various indicators. This image illustrates the compact design and primary external features of the heat pump.

Figure 3.2: The POOLEX Silverline 90 heat pump, highlighting its compatibility with pools up to 45m³ and the integrated Touch & Go control system. This image emphasizes the user-friendly interface and capacity suitability.

Figure 3.3: Key features of the POOLEX Silverline 90 heat pump, including 6 capacities up to 85m³, titanium exchanger, power range of 5.5 to 18 kW, and anti-corrosion properties. This graphic summarizes the technical advantages of the unit.

Figure 3.4: Accessories included with the POOLEX Silverline 90 heat pump: maintenance cover, anti-vibration support kit, 10-meter extension cable, condensate drainage hose, and 50mm PVC connectors. This image details the complete package for installation and maintenance.

Figure 3.5: The POOLEX Silverline heat pump's energy efficiency, demonstrating up to 80% savings compared to traditional heating methods. This image highlights the economic benefit of using the heat pump.

Figure 3.6: The POOLEX Silverline 90 heat pump uses R410 ecological refrigerant, emphasizing its environmental friendliness. This image points out the type of refrigerant used and its eco-conscious design.

Figure 3.7: The POOLEX Silverline heat pump offers 6 capacities for pools up to 85m³, with a power range of 5.5 to 18 kW. This image illustrates the versatility and scalability of the heat pump series.

4. Enstalasyon ak Enstalasyon

4.1 Seleksyon Sit

Choose a well-ventilated outdoor location, away from direct sunlight and heat sources. Ensure sufficient clearance around the unit for proper airflow (minimum 50cm from walls or other obstructions). The ground must be level and capable of supporting the unit's weight (49 kg).

4.2 Koneksyon plonbri

1. Connect the heat pump to your pool's filtration system after the filter and before any chemical injection points.
2. Use the provided PVC connectors (Ø 50mm) for water inlet and outlet.
3. Asire w ke tout koneksyon yo pa kite dlo pase pou anpeche flit.
4. Install a bypass valve system to allow for maintenance without draining the pool.

4.3 Koneksyon elektrik

Electrical installation must be performed by a certified electrician in accordance with local regulations.

• The unit requires an electrical power supply (Type: Electric).
• Ensure the circuit is protected by a suitable circuit breaker and residual current device (RCD).
• Konekte aparèy la byen atè.
• Connect the wired control extension (10m) if using the remote panel.

4.4 Premye kòmansman

1. Ensure the pool pump is running and water is flowing through the heat pump.
2. Turn on the power supply to the heat pump.
3. Set the desired water temperature using the LCD control panel.
4. Allow several hours or days for the pool water to reach the set temperature, depending on initial water temperature and ambient conditions.

5. Operasyon Enstriksyon

5.1 Control Panel (Touch & Go)

The heat pump is equipped with an LCD control panel featuring Touch & Go technology for easy operation. Refer to the specific instructions provided with the control panel for detailed navigation.

5.2 Anviwònman Tanperati

Use the up/down arrows on the control panel to adjust the desired pool water temperature. The unit will automatically operate to maintain this temperature.

5.3 Mòd Fonksyònman

The heat pump primarily operates in heating mode. It will automatically turn on when the pool water temperature drops below the set point and turn off once the set point is reached.

5.4 Wi-Fi Module (Optional)

An optional Wi-Fi module is available for remote control and monitoring. Consult the Wi-Fi module's separate manual for installation and operation instructions.

6. Antretyen

6.1 Netwayaj regilye

• Keep the area around the heat pump clear of debris, leaves, and other obstructions.
• Clean the evaporator coil regularly with a soft brush or low-pressure water to ensure efficient airflow.
• Siye deyò c laasing ak piblisiteamp twal.

6.2 Winterization

Before winter or prolonged periods of non-use, it is essential to properly winterize the heat pump:

1. Dekonekte ekipman pou pouvwa a.
2. Drain all water from the heat pump's plumbing system to prevent freezing damage.
3. Cover the unit with the provided maintenance cover or a suitable protective cover.

6.3 Drenaj kondansasyon

Ensure the condensate drainage hose is clear and properly routed to allow water to drain away from the unit's base.

NAN. Depanaj

For issues not listed or if problems persist, contact a qualified service technician or POOLEX customer support.

8. Espesifikasyon

9. Garanti ak sipò

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Poolstar websit la. Kenbe prèv acha ou pou reklamasyon garanti.

Included accessories: Anti-vibration support kit, PVC connectors (Ø 50mm 1½''), condensate drainage hose, multi-language user manual, wired control extension (10m).