oEdRo Soft Tri-fold Truck Bed Tonneau Cover Instruction Manual

Entwodiksyon

This manual provides detailed instructions for the installation, operation, and maintenance of your oEdRo Soft Tri-fold Truck Bed Tonneau Cover. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your product.

Konpatibilite

Kouvèti tonneau sa a konpatib ak modèl kamyon sa yo:

• Dodge Ram 1500: 2002-2018
• Ram 1500 Classic & New Body: 2019-2026
• Dodge Ram 2500: 2003-2026
• Dodge Ram 3500: 2003-2026

Enpòtan: This cover is designed for Fleet Side 6.4ft / 6.5ft beds only e se not compatible with models equipped with RamBox or Split Tailgate.

To ensure proper fitment, measure your truck bed length before ordering. The measurement should be taken from the bulkhead to the tailgate, along the inside of the bed.

Image: How to measure your truck bed size. Ensure your bed measures approximately 6.4 feet from bulkhead to tailgate for proper fit.

Enfòmasyon sou Sekirite ak Konsiderasyon Enpòtan

Please observe the following safety guidelines and considerations:

• Asire tout clamps and fasteners are securely tightened before driving. Regularly check for tightness.
• Pa mete objè lou sou kouvèti tonneau a.
• Always ensure the cover is properly latched or folded when the vehicle is in motion.
• Keep hands and fingers clear of moving parts during folding and unfolding operations.
• Do not modify the tonneau cover or its components.

Incompatible Truck Bed Accessories

This tonneau cover is not suitable for installation on trucks with certain existing bed accessories. Please remove any of the following prior to installation:

• Bed racks
• Bwat zouti
• Roll bars
• Any other accessories that obstruct the bed rails or the area where the tonneau cover clampyo enstale.

Imaj: Egzamples of truck bed conditions not suitable for tonneau cover installation. Remove any obstructing accessories before proceeding.

Kontni pake

Verifye ke tout konpozan yo prezan anvan ou kòmanse enstalasyon an:

• oEdRo Soft Tri-fold Tonneau Cover Assembly (pre-assembled rails and cover)
• Monte Clamps (pre-enstale oswa separe)
• Weather Strip (if included separately)
• Manyèl Enstriksyon
• LED Light (included as an accessory)

Image: A free LED light is included to illuminate your truck bed.

Enstalasyon ak Enstalasyon

The oEdRo Soft Tri-fold Tonneau Cover is designed for easy, no-drill installation in most cases. Follow these steps for a smooth setup:

Step 1: Prepare the Truck Bed

• Clean the truck bed rails thoroughly to ensure a good seal.
• Remove any existing bed accessories that may interfere with the cover's installation (refer to the Safety Information section).
• If your truck has a bed liner that extends over the bed rails, you may need to make small cuts to allow the clamps to secure properly. For bed liners under the bed rails, no cutting is typically required.

Step 2: Position the Tonneau Cover

• Place the pre-assembled tonneau cover onto the front of your truck bed, near the bulkhead.
• Ensure the cover is centered and flush with the bed rails.

Image: Visual guide for the no-drilling installation process. The cover is placed, unfolded, and then secured.

Step 3: Secure the Front Clamps

• Locate the front clamps on the underside of the tonneau cover.
• Kwòk cl laamps under the truck bed rails and tighten them securely. Ensure a strong connection to stabilize the cover in its initial position.

Image: Details of the tonneau cover's construction and securing mechanisms. Top right shows a strong connection point for stability.

Step 4: Unfold and Secure the Rear Clamps

• Carefully unfold the tonneau cover towards the tailgate.
• Once fully extended, locate the rear security clamps.
• Engage and tighten these clamps to the truck bed rails. These clamps ensure the tonneau cover stays put and provides a secure, snow-proof, and dust-proof trunk instantly.

Image: Bottom right shows the security clamps that hold the cover in place at the rear.

Step 5: Install Weather Strip (if separate)

• If your weather strip is not pre-installed, apply it along the tailgate edge or other specified areas to prevent rain and snow from entering the truck bed.

Image: The tonneau cover with an included weather strip ensures a perfect fit and protection against elements.

Enstriksyon Operasyon

Opening the Tonneau Cover

1. Release the rear security clamps by disengaging them from the truck bed rails.
2. Fold the rear panel of the tonneau cover towards the front of the truck.
3. Continue folding the middle panel over the front panel.
4. Secure the folded cover using the integrated straps or buckles to prevent it from unfolding during transit.

Closing the Tonneau Cover

1. Release the securing straps/buckles.
2. Carefully unfold the front panel, then the middle panel, and finally the rear panel over the truck bed.
3. Ensure the cover is properly aligned with the bed rails.
4. Engage and tighten the rear security clamps to secure the cover in the closed position.

Proper operation ensures your cargo remains protected and can contribute to improved fuel efficiency.

Image: The aerodynamic design of the tonneau cover can improve gas mileage by up to 12%.

Antretyen

To ensure the longevity and optimal performance of your oEdRo Tonneau Cover, follow these maintenance guidelines:

• Netwayaj: Wash the tonneau cover regularly with mild soap and water. Use a soft brush or cloth. Rinse thoroughly and allow to air dry. Avoid harsh chemicals or abrasive cleaners.
• Pwoteksyon UV: The cover is made from double-layer PVC with UV protection. However, applying a UV protectant spray designed for vinyl or tonneau covers can further extend its life and prevent fading.
• Tcheke Materyèl: Periodically inspect all clamps, hinges, and fasteners for tightness. Re-tighten as necessary to maintain a secure fit.
• Weather Seal: Check the weather strip and seals for any signs of wear or damage. Replace if necessary to maintain water resistance.
• Depo: If removing the cover for extended periods, clean it thoroughly, ensure it is completely dry, and store it in a cool, dry place away from direct sunlight.

Depanaj

Espesifikasyon

Garanti ak sipò

oEdRo products are designed for durability and performance. For specific warranty information, please refer to the documentation included with your purchase or visit the official oEdRo websit.

If you encounter any issues or have questions regarding your tonneau cover, please contact oEdRo customer support. If the included LED light is broken upon receipt, contact us via Amazon message for an exchange.

Enfòmasyon pou kontakte: Refer to your purchase documentation or the oEdRo official websit la pou jwenn enfòmasyon kontak ki pi resan yo.