1. Entwodiksyon
This manual provides instructions for the safe and effective operation of the SMART SENSOR AS8906 Handheld NO2 Gas Leak Detector. This device is designed for detecting Nitrogen Dioxide (NO2) gas concentrations in various environments. Please read this manual thoroughly before using the product.
1.1 Enfòmasyon sou Sekirite
- Always operate the device in accordance with the instructions provided.
- Do not attempt to modify or repair the device yourself. Refer to qualified personnel for service.
- Ensure the device is charged using the provided charging adapter and USB cable.
- Avoid exposing the device to extreme temperatures or humidity outside the specified operating conditions.
- This device is intended for professional use and should be handled with care.
2. Pwodwi souview
2.1 Kontni pake a
Pake estanda a gen ladan atik sa yo:
- 1 x Nitrogen Dioxide Gas Monitor (AS8906)
- 1 x manyèl itilizatè
- 1 x Chargement adaptè
- 1 x USB kab
- 1 x Hand Carry Case
- 1 x Sètifika Kalibrasyon
- 1 x CNEX Certificate
- 1 x Gift Paper Box
Figi 2.1: Kontni estanda nan pake a.
2.2 Konpozan Aparèy
Familiarize yourself with the main components of the AS8906 detector:
Figi 2.2: Devan view and labeled components of the AS8906 detector.
- High Sensitive Sensor: Detects NO2 gas concentration.
- Sampling Pump Connecting Port: For attaching the optional sampling ponp.
- Ekran LCD: Displays gas concentration, battery status, and other information.
- Desann bouton: Used for navigation and decreasinvalè g yo.
- Up bouton: Used for navigation and increasinvalè g yo.
- Son alam: Emits an audible alert when gas concentration exceeds set limits.
- Pò chaje: Pou konekte kab chaje USB a.
- Limyè Alam: Visual alert (LED) when gas concentration exceeds set limits.
- Pouvwa sou / Off bouton: Kontwole pouvwa aparèy la.
- Bouton Antre: Konfime seleksyon ak paramèt.
2.3 Dimansyon
The AS8906 detector features a compact design for portability.
Figi 2.3: Dimansyon aparèy la.
Dimansyon: 120.2mm (Wotè) x 64.5mm (Lajè) x 38.3mm (Pwofondè).
Figure 2.4: The compact size allows for easy portability.
3. Enstalasyon
3.1 Chaje Aparèy la
The AS8906 detector is powered by a built-in 3.7V Li-battery. Before first use, ensure the device is fully charged.
- Locate the charging port at the bottom of the device.
- Konekte kab USB bay la nan pò chaje a.
- Connect the other end of the USB cable to the charging adapter.
- Plug the charging adapter into a standard power outlet.
- The battery indicator on the LCD screen will show charging status. A full charge typically provides up to 12 hours of continuous operation.
Figure 3.1: Charging port location.
Figure 3.2: Gas detector with recharge adapter.
3.2 Konekte Sampling Pump (Optional)
The optional sampling pump (AS8930) is designed to assist the gas detector in environments with limited access or poor air circulation. It does not operate independently and requires power from the gas detector.
- Aliman s laampling pump with the gas detector's sampling pump connecting port.
- Securely attach the sampling pump to the gas detector using the two closed-type screws. Ensure a tight connection to avoid poor contact.
- Connect the soft rubber tube (500mm long) to the nozzle of the sampling ponp.
- Enpòtan: Do not connect any other voltage power supply to the sampling pump to prevent damage.
Figi 3.3: Sampling pump and accessories.
4. Operasyon
4.1 Limen/Etenyen
- Pou limen: Peze epi kenbe la Bouton On/Off until the LCD screen illuminates. The device will perform a self-test.
- Pou etenn: Peze epi kenbe la Bouton On/Off jiskaske ekran an etenn.
4.2 Konprann ekspozisyon an
The high-density digital LCD screen displays real-time gas concentration values, battery status, and other operational indicators. The backlight function allows for use in dark areas.
- PPM: Indicates parts per million, the unit for gas concentration.
- Ikon batri: Montre nivo chaj batri aktyèl la.
- Endikatè alam: Visual cues for alarm status.
4.3 Fonksyon alam
The device features high and low alarm functions with three alert methods: sound, light, and vibration. Alarm values are adjustable.
- When the gas concentration reaches a preset high or low alarm value, the device will activate its sound, light, and vibration alarms.
- The alarm sound can reach up to 80dB.
4.4 Adjusting Alarm Values
Refer to the on-screen menu for adjusting high and low alarm thresholds. Use the Up epi Desann buttons to navigate and change values, and the Antre bouton pou konfime.
4.5 Using the Sampling Ponp
Lè s laampling pump is connected, it will draw air into the detector, allowing for gas concentration measurement in remote or confined spaces. The air flow velocity is approximately 0.5 cubic inches per hour, with a maximum gas sample collecting distance of about 50 feet.
5. Antretyen
5.1 Swen Batri
- Recharge the device when the battery indicator shows low power to ensure continuous operation.
- Evite vide batri a nèt souvan pou pwolonje dire lavi li.
- If storing the device for an extended period, charge it to approximately 50% and recharge every few months.
5.2 Netwayaj
- Siye eksteryè aparèy la ak yon mou, damp twal.
- Pa sèvi ak pwodui netwayaj abrazif oswa solvan, paske sa yo ka domaje c la.asing oswa ekran.
- Ensure no liquids enter the sensor area or charging port.
5.3 Kalibrasyon
The device comes with a calibration certificate. For optimal accuracy and compliance, periodic professional calibration is recommended. Refer to the manufacturer or authorized service centers for calibration services.
NAN. Depanaj
If you encounter issues with your AS8906 detector, refer to the following common problems and solutions:
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Aparèy pa limen. | Batri ki fèb oswa ki vid. | Charge the device using the provided adapter and USB cable. |
| Lekti ki pa kòrèk. | Sensor contamination or need for calibration. | Ensure the sensor area is clean. Consider professional calibration if readings remain inconsistent. |
| Alarm not sounding/lighting/vibrating. | Alarm settings configured incorrectly or disabled. | Check alarm settings in the device menu. Ensure volume and vibration are enabled. |
| Sampling pump not working. | Poor connection to the detector or pump malfunction. | Asire s laampling pump is securely attached with screws. Verify the detector is powered on. |
If the problem persists after attempting these solutions, contact customer support for further assistance.
7. Espesifikasyon
7.1 Espesifikasyon detektè
| Karakteristik | Detay |
|---|---|
| Mak | SMART CAPTEUR |
| Modèl | AS8906 |
| Kalite gaz | diyoksid nitwojèn (NO2) |
| Ranje Mezi | 0 ~ 20 ppm |
| Rezolisyon | 0.1 ppm |
| Prensip travay | Capteur elektwochimik |
| Kalite Alam | Sound, Light, Vibration (adjustable values) |
| Nivo son alam | Jiska 80dB |
| Tanperati Fonksyònman | -10 ~ 50 ° C |
| Operasyon Imidite | 15~95% RH (standard) |
| Sous pouvwa | 3.7V Li-battery (Built-in) |
| Travay aktyèl | 16mA |
| Operasyon kontinyèl | Apeprè 12 èdtan (chaj konplè) |
| Materyèl | ABS plastik |
| Pwa nèt | 200g (7.1 ons) |
| Dimansyon | 120.2 x 64.5 x 38.3 mm |
| Sètifikasyon | JJG693; JJG695: JJG915 and GB3836 series anti-explosion standard, CNEX |
7.2 Sampling Pump Specifications (Optional Accessory)
| Karakteristik | Detay |
|---|---|
| Opere Voltage Range | DC 2.2V-3.2V |
| Travay aktyèl | <280mA |
| Dyamèt bouch | 2.5mm |
| Bri | <75 dB |
| Dimansyon | 100.8 x 62.3 x 50 mm |
| Max Sample Distance | Apeprè. 50 pye |
| Air Flow Velocity | Approx. 0.5 cubic inches per hour |
8. Garanti ak sipò
8.1 Enfòmasyon sou Garanti
Your SMART SENSOR AS8906 Handheld NO2 Gas Leak Detector comes with a warranty. Please refer to the included Warranty Card in your package for specific terms and conditions, including warranty period and coverage details.
8.2 Sipò pou Kliyan
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact SMART SENSOR customer support. Contact information can typically be found on the product packaging, the warranty card, or the official SMART SENSOR websit.