Autel MaxiLink ML519 OBD2 Scanner Instruction Manual

1. Entwodiksyon

The Autel MaxiLink ML519 is an advanced OBDII/EOBD scanner designed to assist in diagnosing vehicle issues. This tool provides comprehensive diagnostic functions, including reading and clearing trouble codes, viewing live data, performing I/M readiness tests, and more. It is compatible with most OBDII-compliant vehicles manufactured from 1996 onwards in the US, and from 2000 for EU-based and Asian cars.

2. Pwodwi souview

2.1 Karakteristik kle

• Reads and clears generic (P0, P2, P3, U0) and manufacturer-specific (P1, P3, U1) codes, and pending codes.
• Etenn limyè motè verifikasyon an (MIL), efase kòd yo, epi retabli monitè yo.
• Patented One-Click I/M Readiness Status Key for quick emissions readiness check.
• Views freeze frame data.
• Displays live PCM data stream in text and graphing formats.
• Performs O2 Monitor Test, On-Board Monitor Test (Mode 6), and Component Test.
• Retrieves vehicle identification information (VIN, CALID, and CVN).
• Built-in DTC lookup library for code definitions.
• Memory backup for off-vehicle data review ak analiz.
• Internet updatable for software and language.
• Prints data via Windows-based PC.

2.2 Kontni pake a

The Autel MaxiLink ML519 package typically includes the following items:

• MaxiLink ML519 Unit
• OBD II Connector Cable
• USB Data Line
• Gid rapid
• Sak Depo

Image: Contents of the Autel MaxiLink ML519 package, including the scanner unit, cables, quick guide, and storage bag.

3. Enstalasyon

3.1 Connecting the Scanner to the Vehicle

1. Turn the vehicle's ignition off.
2. Locate the vehicle's 16-pin Data Link Connector (DLC). The DLC is usually located under the dashboard on the driver's side.
3. Connect the OBD II connector cable from the ML519 scanner to the vehicle's DLC. Ensure a secure connection.
4. Turn the vehicle's ignition to the ON position (engine off). The scanner will automatically power on.

Image: The Autel MaxiLink ML519 scanner connected to a vehicle's OBD-II port, displaying its main menu.

4. Operasyon Enstriksyon

4.1 Full OBDII Scan Tool Functions

The ML519 supports all 10 modes of OBD II operation, providing comprehensive diagnostic capabilities.

Imaj: Yon plis paseview of the Autel MaxiLink ML519's full OBDII scan tool functions, including erase codes, DTC definition, live data, and more.

4.2 Lekti ak Efase Kòd Pwoblèm Dyagnostik (DTC)

To read DTCs:

1. Nan meni prensipal la, chwazi 'Read Codes'.
2. The scanner will display any stored or pending DTCs.

To clear DTCs:

1. Nan meni prensipal la, chwazi 'Erase Codes'.
2. Confirm the action when prompted. This will turn off the Check Engine Light (MIL) and reset monitors.

4.3 One-Click I/M Readiness (Ready Test)

This function allows you to quickly check the readiness status of the vehicle's emission system, which is crucial for annual emission tests. The ML519 provides visual and audible indications.

1. Peze dedye a I/M Preparasyon button on the scanner.
2. The screen will display the status of various monitors (e.g., Misfire, Fuel System, O2 Sensors, EVAP). A green checkmark indicates readiness, while an 'X' indicates not ready.

Image: The Autel MaxiLink ML519 displaying the I/M Readiness screen, showing the status of various emission monitors with checkmarks and 'X' symbols.

4.4 Viewing Done Live

The ML519 can display real-time sensor data from the vehicle's Powertrain Control Module (PCM) in both text and graphical formats. This allows for detailed analysis of vehicle performance.

1. Nan meni prensipal la, chwazi 'Live Data'.
2. Choose between 'View Data' (text list) or 'Graph Data' (graphical representation).
3. Use the navigation buttons to scroll through parameters or zoom in/out on graphs.

Image: The Autel MaxiLink ML519 displaying live data, showing RPM in a graphical format and a list of data parameters.

4.5 DTC Lookup Function

The built-in DTC lookup library provides detailed definitions for generic and manufacturer-specific trouble codes, helping you understand the cause of a fault.

1. Nan meni prensipal la, chwazi 'DTC Lookup'.
2. Enter the DTC code using the scanner's buttons.
3. The scanner will display the definition of the entered code.

Image: The Autel MaxiLink ML519 displaying the DTC Lookup function, showing how to input a code and view definisyon li yo.

4.6 Other Diagnostic Tests

• Tès Monitè O2: Retrieves O2 sensor monitor test results for the most recently completed tests from the vehicle's on-board computer.
• Tès Monitè Abò (Mòd 6): Rekipere rezilta tès pou konpozan ak sistèm motè ki gen rapò ak emisyon ki pa kontwole kontinyèlman.
• Tès eleman: Pèmèt inisyasyon yon tès flit pou sistèm EVAP machin nan.
• Retrieve Vehicle Information: Displays the Vehicle Identification Number (VIN), Calibration ID (CALID), and Calibration Verification Number (CVN).

4.7 Data Printing

The ML519 allows you to print diagnostic data via a Windows-based PC. Connect the scanner to your PC using the provided USB cable and use the Autel PC Suite software (available for download from the Autel website) to manage and print data.

5. Antretyen

5.1 Swen Jeneral

• Keep the scanner dry and clean. Avoid exposure to moisture or extreme temperatures.
• Do not use abrasive cleaners or solvents on the unit. Use a soft, damp twal pou netwaye.
• Store the scanner in its protective storage bag when not in use to prevent damage.

NAN. Depanaj

6.1 Pwoblèm komen ak solisyon

• Eskanè a pa limen: Ensure the OBD II cable is securely connected to the vehicle's DLC and the vehicle's ignition is in the ON position. Check the vehicle's battery voltage (must be 8.0 to 18.0 V).
• Link error: Verify the vehicle is OBDII compliant. Check the connection of the OBD II cable. Turn the ignition off, wait 10 seconds, then turn it back on.
• Pa gen kominikasyon ak machin nan: Confirm the vehicle supports OBDII protocols. Try connecting to a different OBDII-compliant vehicle to rule out scanner issues.
• Screen freezes: Disconnect the scanner from the vehicle, then reconnect. If the issue persists, perform a software update.

7. Espesifikasyon

8. Mizajou lojisyèl

The Autel MaxiLink ML519 comes with lifetime free software updates. Regular updates ensure compatibility with newer vehicle models and provide enhanced features. To update the software:

1. Download the Autel PC Suite software from the official Autel websit.
2. Install the software on a Windows-based PC.
3. Connect the ML519 scanner to your PC using the provided USB cable.
4. Follow the on-screen instructions in the PC Suite to download and install the latest software updates to your device.

9. Garanti ak sipò

9.1 Enfòmasyon sou Garanti

The Autel MaxiLink ML519 is backed by a 12-month warranty against defects in materials and workmanship from the date of purchase. This warranty covers repair or replacement of the product under normal use conditions.

9.2 Sipò pou Kliyan

For any questions, technical assistance, or warranty claims, please contact Autel customer service. Refer to the official Autel website for the most current contact information or use the email provided in your product documentation.