TC Electronic HALL OF FAME 2 REVERB Pedal Instruction Manual

1. Entwodiksyon

The TC Electronic HALL OF FAME 2 REVERB is an iconic reverb pedal designed for guitarists seeking versatile and high-quality reverb effects. This manual provides essential information for setting up, operating, and maintaining your pedal.

2. Karakteristik kle

Innovative MASH Technology: The footswitch transforms into a pressure-sensitive expression controller, allowing for dynamic real-time effect manipulation.
Shimmer Reverb Algorithm: Elevates your reverb an octave through each feedback loop, delivering an ethereal and atmospheric sound.
Next-Generation Reverb Algorithms: Provides realistic and phenomenal-sounding reverb tones.
TonePrint Enabled: Create and customize unique tones for your pedal using the free TonePrint app, offering endless sonic possibilities.

3. Kontwòl ak Koneksyon

TC Electronic HALL OF FAME 2 REVERB pedal, top-down view

Figi 1: Anwo-anba view of the HALL OF FAME 2 REVERB pedal, showing controls and footswitch.

This image displays the top surface of the TC Electronic HALL OF FAME 2 REVERB pedal. Visible are four black rotary knobs and a single silver MASH footswitch. The knobs are labeled 'DECAY', 'TONE', 'LEVEL', and a multi-position 'TYPE' knob. The 'TYPE' knob allows selection between various reverb algorithms such as 'SPRING', 'PLATE', 'HALL', 'ROOM', 'CHURCH', 'MOD', 'LOFI', 'SHIMMER', and 'CLOUD'. The MASH footswitch is prominently located at the bottom center, featuring 'MASH' and 'TRUE BYPASS' labels.

TC Electronic HALL OF FAME 2 REVERB pedal, side view ak priz antre/sòti

Figi 2: Side view of the pedal, highlighting input and output jacks.

Imaj sa a montre yon bò view of the HALL OF FAME 2 REVERB pedal, revealing the input and output jacks. There are two input jacks labeled 'STEREO IN MONO' (1 and 2) and two output jacks labeled 'STEREO OUT MONO' (REVERB and 2). These 1/4-inch audio jacks allow for both mono and stereo connections, providing flexibility in signal routing.

TC Electronic HALL OF FAME 2 REVERB pedal, rear view ak antre pouvwa

Figi 3: Dèyè view of the pedal, showing power input and USB port.

The rear panel of the pedal is shown, featuring the power input and a USB port. The power input is a standard 9V DC 100mA jack. The USB port is used for connecting the pedal to a computer for TonePrint editing and firmware updates.

3.1. bouton kontwòl

DEKAYI: Controls the length of the reverb tail. Turn clockwise for longer decay, counter-clockwise for shorter.
TON: Adjusts the brightness or darkness of the reverb. Clockwise for brighter, counter-clockwise for darker.
NIVO: Sets the overall mix level of the reverb effect with your dry signal.
TIP: A multi-position switch to select different reverb algorithms (Spring, Plate, Hall, Room, Church, Mod, Lofi, Shimmer, Cloud).

3.2. MASH Footswitch

The MASH footswitch is a pressure-sensitive expression controller. Pressing harder on the footswitch dynamically alters a chosen effect parameter, offering expressive control beyond simple on/off switching. It also functions as a true bypass switch for activating/deactivating the effect.

3.3. Koneksyon

INPUT (1/4" Mono/Stereo): Connect your instrument or previous pedal in the signal chain here. Supports mono or stereo input.
OUTPUT (1/4" Mono/Stereo): Konekte ak ou amplifier or next pedal in the signal chain. Supports mono or stereo output.
POWER (9V DC, 100mA): Connect a regulated 9V DC power supply (center negative).
Pò USB: For connecting to a computer to use the TonePrint Editor software and for firmware updates.

4. Gid Enstalasyon

Asire w ke tout ekipman odyo yo (amplifier, other pedals) is powered off.
Connect your guitar to the INPUT jack(s) of the HALL OF FAME 2 REVERB pedal.
Connect the OUTPUT jack(s) of the pedal to your amplifikatè a oswa pwochen pedal la nan chèn siyal ou a.
Connect a regulated 9V DC power supply (center negative, 100mA minimum) to the POWER input.
Pouvwa sou ou amplifier and other audio equipment.

5. Operasyon Enstriksyon

5.1. Operasyon debaz

Angaje/Kontoune: Press the MASH footswitch once to toggle the effect on or off. The LED indicator will illuminate when the effect is active.
Selecting Reverb Type: Turn the TYPE knob to select your desired reverb algorithm.
Adjusting Reverb Parameters: Use the DECAY, TONE, and LEVEL knobs to fine-tune the selected reverb type to your preference.

5.2. MASH Footswitch Functionality

The MASH footswitch is a pressure-sensitive expression controller. Pressing harder on the footswitch dynamically alters a chosen effect parameter, offering expressive control beyond simple on/off switching. The specific parameter controlled by MASH can be customized using the TonePrint Editor.

5.3. TonePrint Functionality

The HALL OF FAME 2 REVERB is TonePrint enabled. This allows you to beam custom-tuned effects from your smartphone (via the free TonePrint app) directly to your pedal, or create your own unique reverb sounds using the TonePrint Editor software on your computer (via USB). Visit the TC Electronic website for more information and to download the app/software.

6. Espesifikasyon teknik

Karakteristik	Spesifikasyon
Dimansyon (L x W x H)	12.2 x 7.4 x 5 cm
Pwa	340 gram
Antre pouvwa	9V DC, 100mA (center negative)
Voltage	240 Volts (Adapter dependent)
Efè odyo	Reverb
Kontwòl Kalite	Push button (MASH footswitch)
Entèfas Materyèl	1/4 inch Audio Jack
Fòma siyal	Analòg
Nimewo Modèl	000-CI300-00010

Avètisman: Espesifikasyon yo ka chanje san avètisman.

NAN. Depanaj

Pa gen son: Tcheke tout koneksyon kab yo (gita, pedal, amplifier). Ensure the power supply is correctly connected and functioning. Verify the pedal is engaged (LED on).
Son fèb oswa defòme: Check instrument cables for damage. Ensure proper input levels from your guitar and output levels to your amplifier. Adjust the LEVEL knob on the pedal.
Effect Not Changing: Ensure the TYPE knob is set correctly. If using TonePrint, verify the TonePrint has been successfully beamed to the pedal.
MASH Footswitch Not Responding: Ensure the pedal is powered and engaged. If customized via TonePrint, verify the MASH function is correctly assigned.

8. Garanti ak sipò

Product warranty information is not available in the provided data. For detailed warranty terms and conditions, please refer to the official TC Electronic website or contact your local dealer. For technical support, visit the TC Electronic support page or consult the comprehensive online resources.

	TC Electronic PLETHORA X1 Quick Start Guide A comprehensive quick start guide for the TC Electronic PLETHORA X1, detailing its features, controls, and functionalities, including TonePrint technology, MASH footswitch, and Bluetooth connectivity.
	TC Electronic Hall of Fame 2 Reverb Quick Start Guide A concise guide to the TC Electronic Hall of Fame 2 Reverb pedal, covering its controls, features, and basic operation. Includes information on USB connectivity, TonePrint editing, MASH function, and FCC compliance.
	Gid demaraj rapid TC Electronic Hall of Fame 2 Mini Reverb A concise guide to the TC Electronic Hall of Fame 2 Mini Reverb effects pedal, covering controls, connections, and compliance information.
	Gid demaraj rapid TC Electronic PLETHORA X3: Pedal TonePrint Gid kout pou konfigirasyon ak itilizasyon pedal TC Electronic PLETHORA X3 TonePrint la, ki gen 127 pedal, 3 fant pou pedal, switch pye MASH, ak yon Tape Deck Looper. Aprann kijan pou kreye pedal, itilize TonePrints, ak koneksyon Bluetooth.
	TC Electronic PLETHORA X5 Quick Start Guide: TonePrint Pedalboard with MASH Footswitches Get started quickly with the TC Electronic PLETHORA X5, a versatile TonePrint pedalboard featuring five MASH footswitches. Learn about its controls, features, specifications, and how to transfer TonePrints.
	TC Electronic Flashback 2 Mini Delay Quick Start Guide A concise guide to the TC Electronic Flashback 2 Mini Delay guitar effects pedal, covering controls, features, and compliance information.

TC Elektwonik HALL OF FAME 2 REVERB