XTUGA EW240 UHF 4-Channel Wireless Microphone System User Manual

1. Entwodiksyon

Thank you for choosing the XTUGA EW240 UHF 4-Channel Wireless Microphone System. This professional wireless microphone system is designed to deliver clear and powerful audio performance for various applications, including family parties, stages, churches, and karaoke. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your system.

2. Enfòmasyon enpòtan sou sekirite

Li tout enstriksyon yo ak anpil atansyon anvan ou sèvi ak pwodwi a.
Kenbe manyèl sa a pou referans nan lavni.
Pa ekspoze aparèy la anba lapli oswa imidite pou evite dife oswa chòk elektrik.
Asire w ke gen bon vantilasyon epi pa bloke okenn ouvèti vantilasyon.
Sèvi ak adaptè pouvwa a sèlman ak inite a.
Pa eseye demonte oswa modifye aparèy la. Konfye tout antretyen bay pèsonèl kalifye.
Jete pil yo selon règleman lokal yo.

3. Pake kontni

Tanpri verifye pake a pou asire w ke tout atik yo la:

1 x 4-Channel Receiver
1 x manyèl itilizatè
4 x Bodypack transmetè
4 x Mikwofòn Lavalier
4 x Mikwofòn kas ekoutè
1 x 110V/220V pouvwa adaptè

4. Pwodwi souview

4.1 Inite reseptè

The receiver is the central unit of the wireless microphone system, featuring a durable metal design and individual volume controls for each of its four channels. It includes four receiving antennas for stable signal reception and an LCD display for monitoring operating status.

Devan view of the XTUGA EW240 4-channel wireless microphone receiver with four antennas and two LCD displays showing channel frequencies. — Devan view of the XTUGA EW240 receiver, displaying channel information and controls.

Close-up of the receiver's LCD display showing 'MICROPHONE SYSTEM CH 01 524.90MHz CH 02 553.40MHz' — Close-up of the receiver's LCD display, showing active channel frequencies.

4.2 Emetè Bodypack

The system includes four bodypack transmitters, each designed for use with either a lavalier or headset microphone. These transmitters are compact, feature an LCD display for battery and operating status, and are powered by two 1.5V batteries, offering up to 8 hours of continuous use.

Two XTUGA bodypack transmitters, one connected to a headset microphone and the other to a lavalier microphone. — Two bodypack transmitters shown with a headset microphone and a lavalier microphone.

Close-up of a single XTUGA bodypack transmitter showing its antenna and LCD screen. — Detaye view of a bodypack transmitter.

XTUGA bodypack transmitter with its battery compartment open, revealing two AA battery slots. — Bodypack transmitter with the battery compartment open.

Two XTUGA bodypack transmitters, one with a lavalier microphone and the other with a headset microphone, along with their respective cables. — Bodypack transmitters with connected lavalier and headset microphones.

5. Enstriksyon Enstalasyon

5.1 Enstalasyon reseptè

Plasman: Place the receiver on a stable, flat surface, away from potential sources of interference (e.g., computers, Wi-Fi routers). Ensure adequate ventilation around the unit.
Koneksyon antèn: Screw the four included antennas onto the ANT A, ANT B, ANT C, and ANT D connectors on the rear panel of the receiver. Position them vertically for optimal signal reception.

Dèyè view of the XTUGA EW240 receiver with four antennas screwed in and pointing upwards. — Dèyè view of the receiver with antennas installed.

Koneksyon pouvwa: Connect the supplied power adapter to the DC 16V, 400mA input on the rear of the receiver, then plug it into a suitable power outlet.
Sòti odyo: Konekte reseptè a nan mixer ou a, amplifier, or sound system using either the 6.3cm (1/4 inch) mixed output or the individual 6.3cm (1/4 inch) outputs for each channel (OUT A, OUT B, OUT C, OUT D).

Dèyè view of the XTUGA EW240 receiver showing various output ports including ANT D, OUT D, OUT C, ANT C, ANT B, MIXED, OUT B, OUT A, and ANT A, along with the DC power input. — Rear panel connections of the receiver.

5.2 Enstalasyon transmetè

Enstalasyon batri: Open the battery compartment of each bodypack transmitter. Insert two 1.5V AA batteries, ensuring correct polarity. Close the compartment securely.
Koneksyon Mikwofòn: Plug the lavalier or headset microphone into the input jack on the bodypack transmitter.
Pouvwa sou: Turn on the power switch on the bodypack transmitter. The LCD display will illuminate, showing the channel and battery status.

6. Operasyon Enstriksyon

Limen Sistèm nan: First, power on the receiver. Then, power on each bodypack transmitter.
Ajisteman Volim: Use the individual volume control knobs on the receiver for each channel (CH 01, CH 02, CH 03, CH 04) to adjust the microphone levels. Start with the volume low and gradually increase it to avoid feedback.
Endikatè siyal: The receiver's LCD display will show the active channel frequencies. The RF (Radio Frequency) and AF (Audio Frequency) indicators will light up when a signal is being received and audio is present, respectively.
Itilizasyon: Position the lavalier microphone approximately 6-8 inches from your mouth, or wear the headset microphone comfortably. Speak clearly into the microphone.
Kouran koupe: When finished, first turn off the bodypack transmitters, then power off the receiver. This helps prevent pops or thumps through your sound system.

7. Antretyen

Netwayaj: Use a soft, dry cloth to clean the receiver and transmitters. Do not use liquid cleaners or solvents.
Ranplasman batri: Replace batteries in the bodypack transmitters when the low battery indicator appears on the LCD display. Always use fresh, high-quality 1.5V AA batteries.
Depo: Store the system in a cool, dry place when not in use. Remove batteries from transmitters if storing for extended periods to prevent leakage.
Swen antèn: Handle antennas carefully. Avoid bending them excessively.

NAN. Depanaj

Pwoblèm	Kòz posib	Solisyon
Pa gen son nan mikwofòn	Transmitter or receiver not powered on; low batteries; microphone not connected; receiver output not connected to sound system; volume too low.	Ensure all units are powered on. Replace batteries. Check microphone connection to transmitter. Verify receiver output is connected and sound system is on. Increase receiver and sound system volume.
Move kalite son/Entèferans	Interference from other wireless devices; transmitter too far from receiver; antennas not positioned correctly; low batteries.	Move away from other wireless devices. Ensure line of sight between transmitter and receiver. Position antennas vertically. Replace batteries.
Kout ranje fonksyònman	Obstructions between transmitter and receiver; antennas not positioned correctly; environmental interference.	Ensure clear line of sight. Position antennas vertically. Avoid using in areas with high RF interference.
Receiver LCD not displaying	Receiver not powered on; power adapter faulty.	Check power connection and ensure receiver is switched on. Try a different power outlet.

9. Espesifikasyon

9.1 General System

Kantite chanèl: 4 chanèl
Estabilite: ± 0.006%
Normal Deviation: ± 22 kHz
Rapò S/N: <120 dB
THD: <0.6%
Repons frekans: 50 Hz - 15 kHz
Ranje: 65 mèt

9.2 Reseptè

Sansiblite: > 80 dB
Sòti odyo: Balanced and Unbalanced (6.3cm mixed output, four 6.3cm individual outputs)
Kondisyon pou pouvwa: AC 16 V, 400 mA
Dimansyon: 440 x 210 x 40 mm
Pwa: Apeprè 1.3 kg
Materyèl: Metal

9.3 Wireless Microphone (Transmitter)

Kalite katouch: Dinamik
RF Sòti: <10 MW
Normal Deviation: ± 22 kHz
Devyasyon maksimòm: ± 80 kHz
Batri: 2 x 1.5 V AA pil
Lavi batri: 8 èdtan

10. Garanti ak sipò

XTUGA products are designed for reliability and performance. For warranty information and technical support, please refer to the contact details provided with your purchase or visit the official XTUGA websit la. Kenbe resi acha ou kòm prèv acha pou nenpòt reklamasyon garanti.

XTUGA EW240