GOOLOO X7 4250A Jump Starter with Air Compressor Instruction Manual

1. Entwodiksyon

Thank you for choosing the GOOLOO X7 4250A Jump Starter with Air Compressor. This versatile device is designed to provide reliable jump-starting power for vehicles, inflate tires, and serve as a portable power bank and LED flashlight. Please read this manual thoroughly before use to ensure safe and optimal operation.

2. Enfòmasyon sou Sekirite

Toujou obsève prekosyon sekirite sa yo pou evite blesi oswa domaj nan aparèy la ak machin nan:

• Pa plonje aparèy la nan dlo oswa ekspoze l anba lapli.
• Do not operate the device if it is damaged or has been dropped.
• Kenbe soti nan atenn timoun yo.
• Asire w ke sistèm nan byen vantile pandan w ap itilize l epi pandan w ap chaje l.
• Evite fè kous kout sou klou demaraj la.amps.
• The device features 10 built-in protection functions, including over-current, short-circuit, reverse polarity, low/high temperature, over-voltage, and over-charge protection. However, always follow instructions carefully.
• Pa eseye demarre yon machin ak yon batri ki domaje anpil oswa ki jele.
• Opere nan limit tanperati espesifye a (-20°C a 60°C).

3. Pake kontni

Verifye ke tout atik yo prezan nan pakè ou a:

• 1 x GOOLOO X7 Jump Starter with Air Compressor
• 1 x Smart Jumper Cable
• 1 x USB-A pou USB-C kab
• 1 x pote sak
• 1 x Air Kawoutchou
• 3 x Air ajutaj
• 1 x manyèl itilizatè

Image: GOOLOO X7 Jump Starter with all included accessories, including jumper cables, air hose, and various nozzles.

4. Pwodwi souview

Familiarize yourself with the main components of your GOOLOO X7 device:

1. Inite Prensipal: Contains the battery, control panel, and ports.
2. Ekspozisyon dijital: Shows battery level, tire pressure, and operating modes.
3. Pò Demaraj Rapid: Pou konekte kab jumper entelijan yo.
4. Air Compressor Port: Pou konekte tiyo lè a.
5. USB Output Ports: Pou chaje aparèy ekstèn yo.
6. Pò Antre USB-C: For charging the GOOLOO X7 itself.
7. Flach ki ap dirije: Integrated light with multiple modes.

Image: Close-up of the GOOLOO X7's digital display, showing battery indicator and pressure units.

5. Enstalasyon

Before first use, ensure the GOOLOO X7 is fully charged.

1. Inisyal chaj: Connect the provided USB-A to USB-C cable to the device's USB-C input port and a suitable USB wall adapter (not included). Charge until the battery indicator on the digital display shows full.
2. Tcheke Nivo Batri: Press the power button once to check the current battery level on the digital display. It is recommended to have at least 50% charge before jump-starting a vehicle.

Image: Close-up of the Type-C charging port on the GOOLOO X7 device.

6. Operasyon Enstriksyon

6.1. Demaraj yon machin ak yon aparèy pou demaraj ak yon sovtaj

The X7 can jump start all 12V vehicles (up to 10L gasoline and 10L diesel engines) up to 70 times on a single charge.

1. Ensure the GOOLOO X7 has sufficient charge.
2. Connect the smart jumper cable to the jump start port on the X7.
3. Tache cl wouj laamp (+) to the positive terminal of the vehicle battery.
4. Tache cl nwa aamp (-) to the negative terminal of the vehicle battery.
5. Once connected correctly, the smart cable indicator light will turn green. If it's red, check connections.
6. Start the vehicle. If it doesn't start immediately, wait 30 seconds and try again.
7. Once the vehicle starts, disconnect the clamps from the car battery first, then disconnect the smart cable from the X7.
8. For completely discharged batteries (below 2V), use the Boost function by pressing and holding the Boost button on the smart cable for 3 seconds until the indicator turns green.

Image: The GOOLOO X7 device with smart jumper cables attached, ready for use.

6.2. Itilizasyon Konpresè Lè a

The X7 features a 160 PSI digital tire inflator, capable of inflating a typical car tire to 20 PSI in approximately 2 minutes.

1. Connect the air hose to the air compressor port on the X7.
2. Attach the other end of the air hose to the tire valve. Use appropriate nozzles for different inflatables (e.g., balls, bicycle tires).
3. Turn on the X7. The digital display will show the current tire pressure.
4. Use the '+' and '-' buttons to set the desired pressure. The device supports PSI, BAR, and KPA units.
5. Peze bouton demaraj la pou kòmanse gonfle konpresè a. Konpresè a ap sispann otomatikman yon fwa presyon predefini an rive.
6. Disconnect the air hose from the tire and the X7.

Image: The GOOLOO X7 device with the air hose and various inflation nozzles.

6.3. Itilizasyon kòm yon Bank Pouvwa

The X7 can charge your electronic devices with its 18W fast charging capability.

1. Connect your device's charging cable to one of the USB output ports on the X7.
2. The X7 will automatically begin charging your device.

Image: The GOOLOO X7 device connected via USB to charge a mobile phone.

6.4. Sèvi ak flach LED la

The X7 includes a 400-lumen LED flashlight with four modes.

1. Press and hold the flashlight button to turn on the continuous white light.
2. Press the button again to cycle through modes: continuous red light, flashing light, SOS signal.
3. Press and hold the button again to turn off the flashlight.

Image: The GOOLOO X7 device with its integrated LED flashlight illuminated.

7. Charging the GOOLOO X7

To recharge your GOOLOO X7:

1. Connect the provided USB-A to USB-C cable to the X7's USB-C input port.
2. Connect the other end of the cable to a USB wall adapter (5V/3A recommended) or a car charger.
3. The digital display will show the charging progress. Charge until the battery indicator is full.

8. Antretyen

Proper maintenance ensures the longevity and performance of your GOOLOO X7.

• Netwayaj: Wipe the device with a dry, soft cloth. Do not use harsh chemicals or abrasives.
• Depo: Sere aparèy la nan yon kote ki fre epi sèk, lwen limyè solèy dirèk ak tanperati ekstrèm.
• Chaje: Recharge the device every 3-6 months if not in regular use to maintain battery health.
• Dissipasyon chalè: The unique honeycomb design aids in heat dissipation, preventing overheating during use and extending product lifespan. Ensure vents are not blocked.

NAN. Depanaj

If you encounter issues with your GOOLOO X7, refer to the following common problems and solutions:

• Aparèy pa limen: Ensure the device is charged. If completely discharged, charge for at least 30 minutes before attempting to power on.
• Vehicle not jump starting:
  • Check that the smart jumper cable is securely connected to both the X7 and the vehicle battery terminals.
  • Asire polarite ki kòrèk la (wouj pou pozitif, nwa pou negatif).
  • If the vehicle battery is extremely low (below 2V), use the Boost function on the smart cable.
  • The vehicle's battery may be beyond jump-starting. Consult a mechanic.
• Konpresè lè a pa gonfle:
  • Ensure the air hose is securely connected to both the X7 and the tire valve.
  • Check that the desired pressure is set and the compressor is turned on.
  • Verify the X7 has sufficient battery charge.
• External devices not charging: Ensure the X7 has sufficient charge and the USB cable is properly connected.

If problems persist, please contact GOOLOO customer support.

10. Espesifikasyon

11. Garanti ak sipò

GOOLOO is committed to providing high-quality products and excellent customer service.

• Garanti: The GOOLOO X7 comes with an 18-month warranty from the date of purchase.
• Règleman retounen: Pwofite yon garanti 30 jou pou retounen pwodwi a san kondisyon.
• Sipò Kliyan: GOOLOO offers 24/7 customer support.
• Sipò teknik: Lifetime customer and technical support are provided.

For any inquiries, technical assistance, or warranty claims, please contact GOOLOO customer service through the retailer's platform or the official GOOLOO websit.

Image: A customer support representative wearing a headset, symbolizing GOOLOO's commitment to customer service.