Ultimate Speed Portable Power Bank and Car Jump Starter

1. Entwodiksyon

Thank you for choosing the Ultimate Speed Portable Power Bank and Car Jump Starter. This versatile 2-in-1 device is designed to provide emergency jump-starting for vehicles and serve as a portable power bank for charging electronic devices. Please read this manual carefully before first use to ensure safe and optimal operation.

2. Enfòmasyon sou Sekirite

WARNING: Improper use can lead to serious injury or damage to the device/vehicle.

• Toujou mete gan ak pwoteksyon pou je lè w ap travay ak pil.
• Pa ekspoze aparèy la anba lapli, imidite, oswa tanperati ekstrèm.
• Kenbe soti nan atenn timoun yo.
• Asire bon vantilasyon pandan w ap itilize.
• Pa fè kous kout sou klou demaraj la.amps.
• Do not attempt to jump start a frozen or visibly damaged battery.
• This device is spark-proof, but always avoid contact with flammable materials.
• Disconnect the device from the vehicle battery immediately after jump-starting.

3. Pake kontni

Tanpri tcheke pake a pou atik sa yo:

• Ultimate Speed Portable Power Bank and Car Jump Starter
• 12V Jump Start Cable with clamps
• Micro USB Adapter for mobile phones/tablets
• Fabric Storage Case
• Acrylonitrile Butadiene Styrene (ABS) Plastic Case
• Chargeur (Adaptè Kouran)

Image: The Ultimate Speed jump starter with its complete set of accessories, including the jump start cables, USB charging cable, and power adapter.

4. Karakteristik ak konpozan pwodwi yo

The Ultimate Speed Jump Starter features a robust design and advanced technology for reliable performance.

• Fonksyonalite 2-an-1: Car jump starter and powerful power bank.
• Plizyè pò: Two USB output ports (1A/2A) and one Micro-USB input port (5V/1A).
• Lanp pòch LED entegre: With a blinking function for emergencies.
• Pwoteksyon avanse: Built-in safeguards against reverse polarity, short circuit, and overload. Detects defective batteries and deep discharges for maximum user and electronic protection.
• Spark-Proof Design: Enhances safety during connection.
• Batri LiFePO4: Powerful Lithium-Ion (Iron Phosphate) battery for high electronic efficiency (up to 90% usable capacity), long cycle stability, and very low self-discharge.
• Sifas ki pa glise: Pou yon manyen ki an sekirite.
• Direct Start: Provides a high current pulse for immediate starting without long charging times.

Imaj: Devan view of the Ultimate Speed jump starter, showing the product label with model information and key specifications.

Imaj: Bò kote view of the device, highlighting the USB output ports, Micro-USB input, 12V output, power button, and integrated LED flashlight.

5. Enstalasyon

5.1 Initial Charging of the Device

Before first use, fully charge the jump starter. Connect the provided charger to the Micro-USB input port on the device and plug it into a 230V mains outlet. The charging time is approximately 13.5 hours for a full charge. The charge status is indicated by individual start LEDs.

5.2 Checking Charge Level

Press the power button briefly to check the current charge level. The LEDs will illuminate to indicate the remaining battery capacity.

6. Operasyon Enstriksyon

6.1 Demare yon Veyikil

This device is suitable for petrol engines up to 3.0 L displacement and diesel engines up to 2.0 L displacement.

1. Asire w ke demarè a byen chaje.
2. Turn off the vehicle's ignition and all electrical accessories.
3. Konekte wouj (+) clamp of the jump start cable to the positive (+) terminal of the vehicle's battery.
4. Konekte nwa (-) clamp of the jump start cable to a clean, unpainted metal part of the vehicle's engine block or chassis, away from the battery.
5. Connect the jump start cable's plug to the 12V output port on the jump starter.
6. Start the vehicle's engine. If it doesn't start immediately, wait 30 seconds before trying again. Do not crank for more than 3 seconds.
7. Once the engine starts, immediately disconnect the jump start cable from the jump starter.
8. Apre sa, dekonekte klou nwa a (-)amp from the vehicle, followed by the red (+) clamp.

Image: The Ultimate Speed jump starter connected to a car battery, demonstrating the proper clamp placement for jump-starting.

Imaj: Yon lòt view of the jump starter connected to a car battery, showing the compact size of the device in an engine bay.

6.2 Itilizasyon kòm yon Bank Pouvwa

The device can charge mobile phones, tablets, and other USB-powered devices.

1. Connect your device's USB charging cable to one of the USB output ports (1A or 2A) on the jump starter.
2. Konekte lòt bout kab la ak aparèy elektwonik ou an.
3. The jump starter will begin charging your device automatically.

Image: The jump starter being used as a power bank, charging a smartphone via its USB port.

6.3 Sèvi ak flach ki ap dirije a

Press and hold the power button to turn the LED flashlight on or off. Press the power button briefly while the flashlight is on to cycle through different modes (e.g., steady light, blinking light).

7. Antretyen

• Rechaje: Pou kenbe batri a an bon eta, rechaje demarè a chak 3-6 mwa, menm si w pa ap itilize li.
• Depo: Sere aparèy la nan yon kote ki fre epi sèk, lwen limyè solèy dirèk ak tanperati ekstrèm.
• Netwayaj: Netwaye aparèy la avèk yon twal mou epi sèk. Pa sèvi ak pwodui chimik ki agresif oswa pwodui netwayaj abrazif.

NAN. Depanaj

9. Espesifikasyon

10. Garanti ak sipò

For warranty claims or technical support, please refer to the documentation provided at the time of purchase or contact your retailer. Specific warranty terms and conditions may vary by region and retailer.